Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 19, 2024 at 01:10:31PM +0000, Bryan O'Donoghue wrote:

A nit, subject: drop second/last, redundant "binding". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

> +  power-domains:
> +    items:
> +      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: ife0
> +      - const: ife1
> +      - const: top
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    description:
> +      CSI input ports.
> +
> +    patternProperties:
> +      "^port@[03]+$":

[0-3], no?


> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +
> +        description:
> +          Input port for receiving CSI data from a CSIPHY.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +

...

> +            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
> +                            <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
> +                            <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
> +                            <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
> +            interconnect-names = "cam_ahb",
> +                                 "cam_hf_mnoc",
> +                                 "cam_sf_mnoc",
> +                                 "cam_sf_icp_mnoc";
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;

These are not needed, I think. Not sure if even correct...

> +
> +                    csiphy_ep0: endpoint {
> +                        clock-lanes = <7>;
> +                        data-lanes = <0 1>;
> +                        remote-endpoint = <&sensor_ep>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> 
> -- 
> 2.45.2
> 




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux