Hi Chris, On Thu, Nov 07, 2024 at 08:47:42AM +1300, Chris Packham wrote: > On 6/11/24 22:57, Andi Shyti wrote: > > On Wed, Nov 06, 2024 at 01:18:35PM +1300, Chris Packham wrote: > > > Add support for the I2C controller on the RTL9300 SoC. There are two I2C > > > controllers in the RTL9300 that are part of the Ethernet switch register > > > block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst > > > I2C controller, GPIO17 for the second). There are 8 possible SDA pins > > > (GPIO9-16) that can be assigned to either I2C controller. This > > > relationship is represented in the device tree with a child node for > > > each SDA line in use. > > > > > > This is based on the openwrt implementation[1] but has been > > > significantly modified > > > > > > [1] - https://scanmail.trustwave.com/?c=20988&d=pL2r5zHAPsW8d92uECdR2T8Eh4fYX_ZwrCyklfTCzQ&u=https%3a%2f%2fgit%2eopenwrt%2eorg%2f%3fp%3dopenwrt%2fopenwrt%2egit%3ba%3dblob%3bf%3dtarget%2flinux%2frealtek%2ffiles-5%2e15%2fdrivers%2fi2c%2fbusses%2fi2c-rtl9300%2ec > > > > > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > > > Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx> > > Thanks for following up with v9. I think nothing prevents us from > > already merging this 4/4 patch, right? > > > From my end yes it's all good to go. Lee's just applied the mfd binding. > > The only thing outstanding are the mips dts changes. I'll wait for a bit and > chase those up. Hopefully they can make it in the 6.13 window but it's not > the end of the world if they don't. Cool, I just wanted to confirm. Applied to i2c/i2c-host. Thanks, Andi
