Add check for the return value of clk_enable() in order to catch the potential exception. Moreover, convert the return type of rk3x_i2c_adapt_div() into int and add the check. Fixes: 7e086c3fc2df ("i2c: rk3x: add i2c support for rk3399 soc") Fixes: 249051f49907 ("i2c: rk3x: handle dynamic clock rate changes correctly") Fixes: c41aa3ce938b ("i2c: rk3x: add driver for Rockchip RK3xxx SoC I2C adapter") Signed-off-by: Jiasheng Jiang <jiashengjiangcool@xxxxxxxxx> --- drivers/i2c/busses/i2c-rk3x.c | 55 ++++++++++++++++++++++++++--------- 1 file changed, 41 insertions(+), 14 deletions(-) diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 4ef9bad77b85..a4662b0dbd8c 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -871,7 +871,7 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate, return ret; } -static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) +static int rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) { struct i2c_timings *t = &i2c->t; struct rk3x_i2c_calced_timings calc; @@ -883,7 +883,11 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) ret = i2c->soc_data->calc_timings(clk_rate, t, &calc); WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz); - clk_enable(i2c->pclk); + ret = clk_enable(i2c->pclk); + if (ret) { + dev_err(i2c->dev, "Can't enable bus clk for rk3399: %d\n", ret); + return ret; + } spin_lock_irqsave(&i2c->lock, flags); val = i2c_readl(i2c, REG_CON); @@ -904,6 +908,8 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) clk_rate / 1000, 1000000000 / t->bus_freq_hz, t_low_ns, t_high_ns); + + return 0; } /** @@ -942,19 +948,27 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long return NOTIFY_STOP; /* scale up */ - if (ndata->new_rate > ndata->old_rate) - rk3x_i2c_adapt_div(i2c, ndata->new_rate); + if (ndata->new_rate > ndata->old_rate) { + if (rk3x_i2c_adapt_div(i2c, ndata->new_rate)) + return NOTIFY_STOP; + } return NOTIFY_OK; case POST_RATE_CHANGE: /* scale down */ - if (ndata->new_rate < ndata->old_rate) - rk3x_i2c_adapt_div(i2c, ndata->new_rate); + if (ndata->new_rate < ndata->old_rate) { + if (rk3x_i2c_adapt_div(i2c, ndata->new_rate)) + return NOTIFY_STOP; + } + return NOTIFY_OK; case ABORT_RATE_CHANGE: /* scale up */ - if (ndata->new_rate > ndata->old_rate) - rk3x_i2c_adapt_div(i2c, ndata->old_rate); + if (ndata->new_rate > ndata->old_rate) { + if (rk3x_i2c_adapt_div(i2c, ndata->old_rate)) + return NOTIFY_STOP; + } + return NOTIFY_OK; default: return NOTIFY_DONE; @@ -1068,8 +1082,20 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap, spin_lock_irqsave(&i2c->lock, flags); - clk_enable(i2c->clk); - clk_enable(i2c->pclk); + ret = clk_enable(i2c->clk); + if (ret) { + dev_err(i2c->dev, "Can't enable bus clk: %d\n", ret); + spin_unlock_irqrestore(&i2c->lock, flags); + return ret; + } + + ret = clk_enable(i2c->pclk); + if (ret) { + dev_err(i2c->dev, "Can't enable bus clk for rk3399: %d\n", ret); + clk_disable(i2c->clk); + spin_unlock_irqrestore(&i2c->lock, flags); + return ret; + } i2c->is_last_msg = false; @@ -1149,9 +1175,7 @@ static __maybe_unused int rk3x_i2c_resume(struct device *dev) { struct rk3x_i2c *i2c = dev_get_drvdata(dev); - rk3x_i2c_adapt_div(i2c, clk_get_rate(i2c->clk)); - - return 0; + return rk3x_i2c_adapt_div(i2c, clk_get_rate(i2c->clk)); } static u32 rk3x_i2c_func(struct i2c_adapter *adap) @@ -1365,9 +1389,12 @@ static int rk3x_i2c_probe(struct platform_device *pdev) } clk_rate = clk_get_rate(i2c->clk); - rk3x_i2c_adapt_div(i2c, clk_rate); + ret = rk3x_i2c_adapt_div(i2c, clk_rate); clk_disable(i2c->clk); + if (ret) + goto err_clk_notifier; + ret = i2c_add_adapter(&i2c->adap); if (ret < 0) goto err_clk_notifier; -- 2.25.1