Ping, Vinod :-)
Andi
On Mon, Nov 11, 2024 at 07:32:42PM +0530, Jyothi Kumar Seerapu wrote:
> GSI hardware generates an interrupt for each transfer completion.
> For multiple messages within a single transfer, this results
> in receiving N interrupts for N messages, which can introduce
> significant software interrupt latency. To mitigate this latency,
> utilize Block Event Interrupt (BEI) only when an interrupt is necessary.
> When using BEI, consider splitting a single multi-message transfer into
> chunks of 8. This approach can enhance overall transfer time and
> efficiency.
>
> Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
> ---
>
> v1 -> v2:
> - Changed dma_addr type from array of pointers to array.
> - To support BEI functionality with the TRE size of 64 defined in GPI driver,
> updated QCOM_GPI_MAX_NUM_MSGS to 16 and NUM_MSGS_PER_IRQ to 8.
>
> drivers/dma/qcom/gpi.c | 49 ++++++++++++++++++++++++++++++++
> include/linux/dma/qcom-gpi-dma.h | 37 ++++++++++++++++++++++++
> 2 files changed, 86 insertions(+)
>
> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
> index 52a7c8f2498f..a98de3178764 100644
> --- a/drivers/dma/qcom/gpi.c
> +++ b/drivers/dma/qcom/gpi.c
> @@ -1693,6 +1693,9 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc,
>
> tre->dword[3] = u32_encode_bits(TRE_TYPE_DMA, TRE_FLAGS_TYPE);
> tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT);
> +
> + if (i2c->flags & QCOM_GPI_BLOCK_EVENT_IRQ)
> + tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_BEI);
> }
>
> for (i = 0; i < tre_idx; i++)
> @@ -2098,6 +2101,52 @@ static int gpi_find_avail_gpii(struct gpi_dev *gpi_dev, u32 seid)
> return -EIO;
> }
>
> +/**
> + * gpi_multi_desc_process() - Process received transfers from GSI HW
> + * @dev: pointer to the corresponding dev node
> + * @multi_xfer: pointer to the gpi_multi_xfer
> + * @num_xfers: total number of transfers
> + * @transfer_timeout_msecs: transfer timeout value
> + * @transfer_comp: completion object of the transfer
> + *
> + * This function is used to process the received transfers based on the
> + * completion events
> + *
> + * Return: On success returns 0, otherwise return error code
> + */
> +int gpi_multi_desc_process(struct device *dev, struct gpi_multi_xfer *multi_xfer,
> + u32 num_xfers, u32 transfer_timeout_msecs,
> + struct completion *transfer_comp)
> +{
> + int i;
> + u32 max_irq_cnt, time_left;
> +
> + max_irq_cnt = num_xfers / NUM_MSGS_PER_IRQ;
> + if (num_xfers % NUM_MSGS_PER_IRQ)
> + max_irq_cnt++;
> +
> + /*
> + * Wait for the interrupts of the processed transfers in multiple
> + * of 64 and for the last transfer. If the hardware is fast and
> + * already processed all the transfers then no need to wait.
> + */
> + for (i = 0; i < max_irq_cnt; i++) {
> + reinit_completion(transfer_comp);
> + if (max_irq_cnt != multi_xfer->irq_cnt) {
> + time_left = wait_for_completion_timeout(transfer_comp,
> + transfer_timeout_msecs);
> + if (!time_left) {
> + dev_err(dev, "%s: Transfer timeout\n", __func__);
> + return -ETIMEDOUT;
> + }
> + }
> + if (num_xfers > multi_xfer->msg_idx_cnt)
> + return 0;
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(gpi_multi_desc_process);
> +
> /* gpi_of_dma_xlate: open client requested channel */
> static struct dma_chan *gpi_of_dma_xlate(struct of_phandle_args *args,
> struct of_dma *of_dma)
> diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h
> index 6680dd1a43c6..1341ff0db808 100644
> --- a/include/linux/dma/qcom-gpi-dma.h
> +++ b/include/linux/dma/qcom-gpi-dma.h
> @@ -15,6 +15,12 @@ enum spi_transfer_cmd {
> SPI_DUPLEX,
> };
>
> +#define QCOM_GPI_BLOCK_EVENT_IRQ BIT(0)
> +
> +#define QCOM_GPI_MAX_NUM_MSGS 16
> +#define NUM_MSGS_PER_IRQ 8
> +#define MIN_NUM_OF_MSGS_MULTI_DESC 4
> +
> /**
> * struct gpi_spi_config - spi config for peripheral
> *
> @@ -51,6 +57,29 @@ enum i2c_op {
> I2C_READ,
> };
>
> +/**
> + * struct gpi_multi_xfer - Used for multi transfer support
> + *
> + * @msg_idx_cnt: message index for the transfer
> + * @buf_idx: dma buffer index
> + * @unmap_msg_cnt: unampped transfer index
> + * @freed_msg_cnt: freed transfer index
> + * @irq_cnt: received interrupt count
> + * @irq_msg_cnt: transfer message count for the received irqs
> + * @dma_buf: virtual address of the buffer
> + * @dma_addr: dma address of the buffer
> + */
> +struct gpi_multi_xfer {
> + u32 msg_idx_cnt;
> + u32 buf_idx;
> + u32 unmap_msg_cnt;
> + u32 freed_msg_cnt;
> + u32 irq_cnt;
> + u32 irq_msg_cnt;
> + void *dma_buf[QCOM_GPI_MAX_NUM_MSGS];
> + dma_addr_t dma_addr[QCOM_GPI_MAX_NUM_MSGS];
> +};
> +
> /**
> * struct gpi_i2c_config - i2c config for peripheral
> *
> @@ -65,6 +94,8 @@ enum i2c_op {
> * @rx_len: receive length for buffer
> * @op: i2c cmd
> * @muli-msg: is part of multi i2c r-w msgs
> + * @flags: true for block event interrupt support
> + * @multi_xfer: indicates transfer has multi messages
> */
> struct gpi_i2c_config {
> u8 set_config;
> @@ -78,6 +109,12 @@ struct gpi_i2c_config {
> u32 rx_len;
> enum i2c_op op;
> bool multi_msg;
> + u8 flags;
> + struct gpi_multi_xfer multi_xfer;
> };
>
> +int gpi_multi_desc_process(struct device *dev, struct gpi_multi_xfer *multi_xfer,
> + u32 num_xfers, u32 tranfer_timeout_msecs,
> + struct completion *transfer_comp);
> +
> #endif /* QCOM_GPI_DMA_H */
> --
> 2.17.1
>
