Re: [PATCH v1 1/6] dt-bindings: i2c: npcm: support NPCM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/02/2022 07:33, Tyrone Ting wrote:
> From: Tyrone Ting <kfting@xxxxxxxxxxx>
> 
> This commit adds compatible and syscon description for NPCM845 i2c module.

Do not use "This commit" but instead:
https://elixir.bootlin.com/linux/v5.13/source/Documentation/process/submitting-patches.rst#L89

> 
> Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
> Signed-off-by: Tyrone Ting <kfting@xxxxxxxxxxx>
> Signed-off-by: Tali Perry <tali.perry1@xxxxxxxxx>
> ---
>  .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 21 ++++++++++++++-----
>  1 file changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> index 128444942aec..05e58f44b03a 100644
> --- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> @@ -7,17 +7,22 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>  title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
>  
>  description: |
> -  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
> -  both master and slave mode. Each controller can switch between master and slave
> -  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
> -  RX.
> +  The NPCM7XX includes sixteen I2C bus controllers and the NPCM8XX includes
> +  twenty-seven I2C bus controllers. NPCM8XX controllers 24-26 are connected on I2C
> +  pins in parallel to controllers 8-10.
> +  All controllers support both master and slave mode.
> +  Each controller can switch between master and slave at run time (i.e. IPMB mode).
> +  NPCM7XX I2C controller has two 16 byte HW FIFO for TX and RX and NPCM8XX I2C
> +  controller has two 32 byte HW FIFO for TX and RX.
>  
>  maintainers:
>    - Tali Perry <tali.perry1@xxxxxxxxx>
>  
>  properties:
>    compatible:
> -    const: nuvoton,npcm750-i2c
> +    enum:
> +      - nuvoton,npcm750-i2c
> +      - nuvoton,npcm845-i2c
>  
>    reg:
>      maxItems: 1
> @@ -36,11 +41,16 @@ properties:
>      default: 100000
>      enum: [100000, 400000, 1000000]
>  
> +  syscon:
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +    description: The phandle of system manager register node.
> +
>  required:
>    - compatible
>    - reg
>    - interrupts
>    - clocks
> +  - syscon

This breaks ABI of existing DTS. Actually your driver change does it but
here it is explicit...

>  
>  allOf:
>    - $ref: /schemas/i2c/i2c-controller.yaml#
> @@ -57,6 +67,7 @@ examples:
>          clock-frequency = <100000>;
>          interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
>          compatible = "nuvoton,npcm750-i2c";
> +        syscon = <&gcr>;
>      };
>  
>  ...


Best regards,
Krzysztof



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux