[PATCH v2 4/7] mfd: hi6421-spmi-pmic: Use generic_handle_irq_safe().

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



generic_handle_irq() is invoked from a regular interrupt service
routine. This handler will become a forced-threaded handler on
PREEMPT_RT and will be invoked with enabled interrupts. The
generic_handle_irq() must be invoked with disabled interrupts in order
to avoid deadlocks.

Instead of manually disabling interrupts before invoking use
generic_handle_irq_safe() which can be invoked with enabled and disabled
interrupts.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
 drivers/misc/hi6421v600-irq.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
index 1c763796cf1fa..caa3de37698b0 100644
--- a/drivers/misc/hi6421v600-irq.c
+++ b/drivers/misc/hi6421v600-irq.c
@@ -117,8 +117,8 @@ static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
 			 * If both powerkey down and up IRQs are received,
 			 * handle them at the right order
 			 */
-			generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
-			generic_handle_irq(priv->irqs[POWERKEY_UP]);
+			generic_handle_irq_safe(priv->irqs[POWERKEY_DOWN]);
+			generic_handle_irq_safe(priv->irqs[POWERKEY_UP]);
 			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
 		}
 
@@ -126,7 +126,7 @@ static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
 			continue;
 
 		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
-			generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
+			generic_handle_irq_safe(priv->irqs[offset + i * BITS_PER_BYTE]);
 		}
 	}
 
-- 
2.34.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux