ICE bit is for resetting the module. Other bits don't matter then, so we
don't need to use the iic_set_clr() function but can use iic_wr().
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-sh_mobile.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index cdd7a746b9d1ed..1701f193d94acf 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -620,10 +620,10 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
if (do_init) {
/* Initialize channel registers */
- iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+ iic_wr(pd, ICCR, 0);
/* Enable channel and configure rx ack */
- iic_set_clr(pd, ICCR, ICCR_ICE, 0);
+ iic_wr(pd, ICCR, ICCR_ICE);
/* Set the clock */
iic_wr(pd, ICCL, pd->iccl & 0xff);
@@ -740,7 +740,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
}
/* Disable channel */
- iic_set_clr(pd, ICCR, 0, ICCR_ICE);
+ iic_wr(pd, ICCR, 0);
/* Disable clock and mark device as idle */
clk_disable_unprepare(pd->clk);
--
2.11.0
