Linux Kernel I²C Bus Layer

• Date Index

• [PATCH 3/3] i2c: rcar: use flags instead of atomic_xfer, (continued)
  • [PATCH 3/3] i2c: rcar: use flags instead of atomic_xfer, Wolfram Sang
    • Re: [PATCH 3/3] i2c: rcar: use flags instead of atomic_xfer, Wolfram Sang
• [PATCH 0/2] i2c: rcar: increase robustness against long SMIs, Wolfram Sang
  • [PATCH 2/2] i2c: rcar: refactor handling of first message, Wolfram Sang
    • Re: [PATCH 2/2] i2c: rcar: refactor handling of first message, Wolfram Sang
  • [PATCH 1/2] i2c: rcar: avoid race condition with SMIs, Wolfram Sang
    • Re: [PATCH 1/2] i2c: rcar: avoid race condition with SMIs, Wolfram Sang
• [PATCH v2] i2c: rcar: fix PM ref counts in probe error paths, Wolfram Sang
  • Re: [PATCH v2] i2c: rcar: fix PM ref counts in probe error paths, Wolfram Sang
  • Re: [PATCH v2] i2c: rcar: fix PM ref counts in probe error paths, Geert Uytterhoeven
• decode-dimms does not detect SPD for kingston memory strips, Сергей Фёдоров
• [PATCH] i2c: busses: i2c-cadence: fix message length when receive block message, Adam Wujek
  • [PATCH v2] i2c: busses: i2c-cadence: fix message length when receive block message, Adam Wujek
    • Re: [PATCH v2] i2c: busses: i2c-cadence: fix message length when receive block message, Michal Simek
• [RFC 0/2] i2c: core and si7020: Add adapter transfer callback, Eddie James
  • [RFC 2/2] iio: humidity: si7020: Use core transfer callback to sleep after reset, Eddie James
  • [RFC 1/2] i2c: core: Add adapter transfer callback, Eddie James
    • Re: [RFC 1/2] i2c: core: Add adapter transfer callback, Peter Rosin
• [PATCH 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms, Dinh Nguyen
  • [PATCH 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller, Dinh Nguyen
    • Re: [PATCH 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller, Krzysztof Kozlowski
  • Re: [PATCH 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms, Andy Shevchenko
    • Re: [PATCH 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms, Dinh Nguyen
• Systems with more than 4 memory slots not supported yet, not instantiating SPD, Сергей Фёдоров
  • Re: Systems with more than 4 memory slots not supported yet, not instantiating SPD, Diederik de Haas
• [PATCH v5 00/10] i2c: npcm: Bug fixes timeout, spurious interrupts, Tyrone Ting
  • [PATCH v5 02/10] i2c: npcm: Change the way of getting GCR regmap, Tyrone Ting
    • Re: [PATCH v5 02/10] i2c: npcm: Change the way of getting GCR regmap, Wolfram Sang
      • Re: [PATCH v5 02/10] i2c: npcm: Change the way of getting GCR regmap, Tyrone Ting
  • [PATCH v5 05/10] i2c: npcm: Add tx complete counter, Tyrone Ting
    • Re: [PATCH v5 05/10] i2c: npcm: Add tx complete counter, Wolfram Sang
      • Re: [PATCH v5 05/10] i2c: npcm: Add tx complete counter, Tyrone Ting
  • [PATCH v5 03/10] i2c: npcm: Remove unused variable clk_regmap, Tyrone Ting
    • Re: [PATCH v5 03/10] i2c: npcm: Remove unused variable clk_regmap, Wolfram Sang
      • Re: [PATCH v5 03/10] i2c: npcm: Remove unused variable clk_regmap, Tyrone Ting
  • [PATCH v5 04/10] i2c: npcm: Fix timeout calculation, Tyrone Ting
    • Re: [PATCH v5 04/10] i2c: npcm: Fix timeout calculation, Wolfram Sang
      • Re: [PATCH v5 04/10] i2c: npcm: Fix timeout calculation, Tyrone Ting
  • [PATCH v5 06/10] i2c: npcm: Correct register access width, Tyrone Ting
    • Re: [PATCH v5 06/10] i2c: npcm: Correct register access width, Wolfram Sang
      • Re: [PATCH v5 06/10] i2c: npcm: Correct register access width, Tyrone Ting
  • [PATCH v5 01/10] dt-bindings: i2c: npcm: support NPCM845, Tyrone Ting
    • Re: [PATCH v5 01/10] dt-bindings: i2c: npcm: support NPCM845, Wolfram Sang
      • Re: [PATCH v5 01/10] dt-bindings: i2c: npcm: support NPCM845, Tyrone Ting
  • [PATCH v5 07/10] i2c: npcm: Handle spurious interrupts, Tyrone Ting
    • Re: [PATCH v5 07/10] i2c: npcm: Handle spurious interrupts, Wolfram Sang
      • Re: [PATCH v5 07/10] i2c: npcm: Handle spurious interrupts, Tyrone Ting
  • [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10, Tyrone Ting
    • Re: [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10, Wolfram Sang
      • Re: [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10, Tali Perry
        • Re: [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10, Wolfram Sang
  • [PATCH v5 10/10] i2c: npcm: Capitalize the one-line comment, Tyrone Ting
    • Re: [PATCH v5 10/10] i2c: npcm: Capitalize the one-line comment, Wolfram Sang
      • Re: [PATCH v5 10/10] i2c: npcm: Capitalize the one-line comment, Tyrone Ting
  • [PATCH v5 09/10] i2c: npcm: Support NPCM845, Tyrone Ting
    • Re: [PATCH v5 09/10] i2c: npcm: Support NPCM845, Wolfram Sang
      • Re: [PATCH v5 09/10] i2c: npcm: Support NPCM845, Tyrone Ting
• [RFC Patch v5 0/1] i2c: core: Adapter and client stats as sysfs attributes, Sui Chen
  • [RFC Patch v5 1/1] i2c debug counters as sysfs attributes, Sui Chen
• [PATCH] i2c: core: Workaround false-positive LOCKDEP in delete_device, Alexander A Sverdlin
  • Re: [PATCH] i2c: core: Workaround false-positive LOCKDEP in delete_device, Wolfram Sang
    • Re: [PATCH] i2c: core: Workaround false-positive LOCKDEP in delete_device, Alexander Sverdlin
• [PATCH v2] i2c: xiic: Correct the datatype for rx_watermark, Shubhrajyoti Datta
  • Re: [PATCH v2] i2c: xiic: Correct the datatype for rx_watermark, Michal Simek
  • Re: [PATCH v2] i2c: xiic: Correct the datatype for rx_watermark, Wolfram Sang
• [PATCH v3] i2c: add support for microchip fpga i2c controllers, Conor Dooley
  • Re: [PATCH v3] i2c: add support for microchip fpga i2c controllers, Wolfram Sang
    • Re: [PATCH v3] i2c: add support for microchip fpga i2c controllers, Conor.Dooley
      • Re: [PATCH v3] i2c: add support for microchip fpga i2c controllers, Wolfram Sang
• [PATCH -next v2 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Yang Yingliang
  • [PATCH -next v2 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource(), Yang Yingliang
    • Re: [PATCH -next v2 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource(), Wolfram Sang
  • Re: [PATCH -next v2 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Stefan Roese
  • Re: [PATCH -next v2 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Wolfram Sang
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe, Jonathan Cameron
  • Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe, Peter Rosin
    • Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe, Jonathan Cameron
      • Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe, Peter Rosin
        • Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe, Eddie James
          • Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe, Eddie James
• Bug in atmel-ecc driver, Uwe Kleine-König
  • Re: Bug in atmel-ecc driver, Uwe Kleine-König
    • Re: Bug in atmel-ecc driver, Tudor.Ambarus
      • Re: Bug in atmel-ecc driver, Uwe Kleine-König
        • Re: Bug in atmel-ecc driver, Tudor.Ambarus
          • Re: Bug in atmel-ecc driver, Uwe Kleine-König
          • [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove(), Uwe Kleine-König
            • Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove(), Uwe Kleine-König
            • Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove(), Tudor.Ambarus
              • Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove(), Uwe Kleine-König
                • Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove(), Tudor.Ambarus
            • Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove(), Herbert Xu
• [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Yang Yingliang
  • [PATCH -next 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource(), Yang Yingliang
    • Re: [PATCH -next 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource(), Stefan Roese
  • Re: [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Stefan Roese
  • Re: [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Christophe JAILLET
    • Re: [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe(), Yang Yingliang
• [PATCH] i2c: mux: pca9541: replace ternary operator with min(), Guo Zhengkui
• [PATCH 0/3] drivers: i2c: thunderx: Marvell thunderx i2c changes, Piyush Malgujar
  • [PATCH 2/3] drivers: i2c: thunderx: Add support for High speed mode, Piyush Malgujar
  • [PATCH 3/3] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers, Piyush Malgujar
    • Re: [PATCH 3/3] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers, Wolfram Sang
  • [PATCH 1/3] drivers: i2c: thunderx: octeontx2 clock divisor logic changes, Piyush Malgujar
    • Re: [PATCH 1/3] drivers: i2c: thunderx: octeontx2 clock divisor logic changes, kernel test robot
      • Re: [PATCH 1/3] drivers: i2c: thunderx: octeontx2 clock divisor logic changes, Wolfram Sang
• [PATCH v2] i2c: core: Fix possible memleak in i2c_new_client_device(), Yang Yingliang
  • Re: [PATCH v2] i2c: core: Fix possible memleak in i2c_new_client_device(), Yang Yingliang
• Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845, Tyrone Ting
• [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Andy Shevchenko
  • [PATCH v5 2/8] pinctrl: intel: Check against matching data instead of ACPI companion, Andy Shevchenko
  • [PATCH v5 4/8] mfd: lpc_ich: Switch to generic p2sb_bar(), Andy Shevchenko
  • [PATCH v5 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support, Andy Shevchenko
  • [PATCH v5 3/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write(), Andy Shevchenko
  • [PATCH v5 7/8] EDAC, pnd2: Use proper I/O accessors and address space annotation, Andy Shevchenko
  • [PATCH v5 8/8] EDAC, pnd2: convert to use common P2SB accessor, Andy Shevchenko
  • [PATCH v5 6/8] i2c: i801: convert to use common P2SB accessor, Andy Shevchenko
  • [PATCH v5 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system, Andy Shevchenko
    • Re: [PATCH v5 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system, Lee Jones
  • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Hans de Goede
    • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Andy Shevchenko
      • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Lee Jones
        • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Andy Shevchenko
          • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Lee Jones
  • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Lee Jones
    • Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper, Hans de Goede
• [PATCH v4 0/9] i2c: npcm: Bug fixes timeout, spurious interrupts, Tyrone Ting
  • [PATCH v4 3/9] i2c: npcm: Remove unused variable clk_regmap, Tyrone Ting
  • [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845, Tyrone Ting
    • Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845, Rob Herring
      • Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845, Tyrone Ting
        • Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845, Krzysztof Kozlowski
  • [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Tyrone Ting
    • Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Andy Shevchenko
      • Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Tyrone Ting
    • Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Wolfram Sang
      • Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Tyrone Ting
        • Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Wolfram Sang
          • Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap, Tyrone Ting
  • [PATCH v4 4/9] i2c: npcm: Fix timeout calculation, Tyrone Ting
  • [PATCH v4 5/9] i2c: npcm: Add tx complete counter, Tyrone Ting
  • [PATCH v4 6/9] i2c: npcm: Correct register access width, Tyrone Ting
  • [PATCH v4 7/9] i2c: npcm: Handle spurious interrupts, Tyrone Ting
    • Re: [PATCH v4 7/9] i2c: npcm: Handle spurious interrupts, Andy Shevchenko
      • Re: [PATCH v4 7/9] i2c: npcm: Handle spurious interrupts, Tyrone Ting
  • [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10, Tyrone Ting
    • Re: [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10, Andy Shevchenko
      • Re: [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10, Tyrone Ting
        • Re: [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10, Tyrone Ting
  • [PATCH v4 9/9] i2c: npcm: Support NPCM845, Tyrone Ting
• [PATCH v2 1/2] i2c-tools: Use getopt, Jean Delvare
  • [PATCH v2 2/2] i2c-tools: Implement and document option -h, Jean Delvare
    • Re: [PATCH v2 2/2] i2c-tools: Implement and document option -h, Wolfram Sang
  • Re: [PATCH v2 1/2] i2c-tools: Use getopt, Wolfram Sang
• [PATCH v2 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq(), Andy Shevchenko
  • [PATCH v2 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Andy Shevchenko
  • [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API, Andy Shevchenko
    • Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API, Michael Ellerman
      • Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API, Andy Shevchenko
        • Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API, Andy Shevchenko
          • Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API, Michael Ellerman
            • Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API, Andy Shevchenko
  • [PATCH v2 3/4] powerpc/52xx: Get rid of of_node assignment, Andy Shevchenko
  • Re: [PATCH v2 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq(), Michael Ellerman
• [PATCH 1/2] i2c-tools: Use getopt, Jean Delvare
  • [PATCH 2/2] i2c-tools: Implement and document option -h, Jean Delvare
  • Re: [PATCH 1/2] i2c-tools: Use getopt, Wolfram Sang
    • Re: [PATCH 1/2] i2c-tools: Use getopt, Jean Delvare
      • Re: [PATCH 1/2] i2c-tools: Use getopt, Wolfram Sang
• [PATCH v2] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void', Yihao Han
  • Re: [PATCH v2] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void', Krzysztof Kozlowski
  • Re: [PATCH v2] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void', kernel test robot
• [PATCH] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void', Yihao Han
  • Re: [PATCH] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void', Krzysztof Kozlowski
• [PATCH] i2c: s3c2410: fix returnvar.cocci warning, Yihao Han
  • Re: [PATCH] i2c: s3c2410: fix returnvar.cocci warning, Krzysztof Kozlowski
• [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer(), Nathan Chancellor
  • Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer(), Michael Walle
  • Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer(), Nathan Chancellor
  • Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer(), Wolfram Sang
    • Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer(), Nathan Chancellor
• regression: Null pointer exception on resume from S3 with i2c DesignWare driver, Thorsten Leemhuis
  • Re: regression: Null pointer exception on resume from S3 with i2c DesignWare driver, Jarkko Nikula
• [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq(), Andy Shevchenko
  • [PATCH v1 4/4] powerpc/52xx: Convert to use fwnode API, Andy Shevchenko
  • [PATCH v1 3/4] powerpc/52xx: Get rid of of_node assignment, Andy Shevchenko
  • [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Andy Shevchenko
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Marc Kleine-Budde
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Damien Le Moal
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Mark Brown
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Wolfram Sang
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, kernel test robot
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Chris Packham
    • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, kernel test robot
  • Re: [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq(), Wolfram Sang
• [PATCH 0/7] dt-bindings: renesas: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
  • [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4, Vinod Koul
  • [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4, Wolfram Sang
  • [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Wolfram Sang
    • Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Wolfram Sang
  • [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Wolfram Sang
    • Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Bartosz Golaszewski
  • [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Joerg Roedel
    • Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Wolfram Sang
  • [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Wolfram Sang
    • Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Guenter Roeck
  • [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4, Wolfram Sang
• [RFC v2 12/39] i2c: add HAS_IOPORT dependencies, Niklas Schnelle
  • Re: [RFC v2 12/39] i2c: add HAS_IOPORT dependencies, Wolfram Sang
• [PATCH v3 0/1] i2c: Allow disabling auto detection via devicetree, Vincent Whitchurch
  • [PATCH v3 1/1] i2c: core: support no-detect property, Vincent Whitchurch
    • Re: [PATCH v3 1/1] i2c: core: support no-detect property, Wolfram Sang
• [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox, Jan Dabros
  • Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox, Jarkko Nikula
    • Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox, Jan Dąbroś
  • Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox, Wolfram Sang
    • Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox, Jan Dąbroś
• [PATCH v2 0/3] i2c: gpio: support write-only sda, Heiner Kallweit
  • [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL, Heiner Kallweit
    • Re: [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL, Wolfram Sang
      • Re: [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL, Heiner Kallweit
        • Re: [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL, Heiner Kallweit
  • [PATCH v2 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only, Heiner Kallweit
    • Re: [PATCH v2 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only, Rob Herring
  • [PATCH v2 3/3] i2c: gpio: support write-only sda, Heiner Kallweit
    • Re: [PATCH v2 3/3] i2c: gpio: support write-only sda, Wolfram Sang
• [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging, Mika Westerberg
  • Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging, Andy Shevchenko
  • Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging, Wolfram Sang
    • Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging, Andy Shevchenko
    • Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging, Mika Westerberg
• [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Rob Herring
  • Re: [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Krzysztof Kozlowski
  • Re: [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Bartosz Golaszewski
  • Re: [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Rob Herring
• [PATCH v2] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC, Biju Das
  • Re: [PATCH v2] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC, Rob Herring
• [PATCH] drm/msm/dsi: fix error check return value of irq_of_parse_and_map(), cgel . zte
• [PATCH] i2c: mux: reg: check return value after calling platform_get_resource(), Yang Yingliang
• [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC, Biju Das
  • Re: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC, Krzysztof Kozlowski
  • Re: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC, Geert Uytterhoeven
    • RE: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC, Biju Das
• [PATCH v2 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value, Krzysztof Kozlowski
  • [PATCH v2 2/2] irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value, Krzysztof Kozlowski
• [PATCH] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Rob Herring
  • Re: [PATCH] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Krzysztof Kozlowski
    • Re: [PATCH] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible, Rob Herring
• [PATCH 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value, Krzysztof Kozlowski
  • [PATCH 2/2] irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value, Krzysztof Kozlowski
  • Re: [PATCH 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value, Krzysztof Kozlowski
    • Re: [PATCH 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value, Marc Zyngier
• [PATCH v7 0/3] Add SSIF BMC driver, Quan Nguyen
  • [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Quan Nguyen
    • Re: [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Quan Nguyen
    • Re: [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Corey Minyard
      • Re: [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Quan Nguyen
        • Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Corey Minyard
          • Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Quan Nguyen
            • Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Corey Minyard
              • Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver, Quan Nguyen
  • [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver, Quan Nguyen
    • Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver, Quan Nguyen
      • Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver, Krzysztof Kozlowski
        • Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver, Quan Nguyen
    • Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver, Rob Herring
  • [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Quan Nguyen
    • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Quan Nguyen
    • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Wolfram Sang
      • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Quan Nguyen
        • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Wolfram Sang
          • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Quan Nguyen
            • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Wolfram Sang
              • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Quan Nguyen
                • Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy, Quan Nguyen
  • Re: [PATCH v7 0/3] Add SSIF BMC driver, Quan Nguyen
• [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe(), Yang Yingliang
  • Re: [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe(), Neil Armstrong
  • Re: [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe(), Wolfram Sang
• [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed, Jarkko Nikula
  • Re: [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed, Andy Shevchenko
  • Re: [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed, Wolfram Sang
• [PATCH 0/4] i2c: xiic: misc fixes, Shubhrajyoti Datta
  • [PATCH 2/4] i2c: xiic: Fix coding style issues, Shubhrajyoti Datta
    • Re: [PATCH 2/4] i2c: xiic: Fix coding style issues, Wolfram Sang
  • [PATCH 3/4] i2c: xiic: Correct the datatype for rx_watermark, Shubhrajyoti Datta
    • Re: [PATCH 3/4] i2c: xiic: Correct the datatype for rx_watermark, Michal Simek
      • Re: [PATCH 3/4] i2c: xiic: Correct the datatype for rx_watermark, Wolfram Sang
  • [PATCH 1/4] i2c-xiic: return value of xiic_reinit, Shubhrajyoti Datta
    • Re: [PATCH 1/4] i2c-xiic: return value of xiic_reinit, Michal Simek
    • Re: [PATCH 1/4] i2c-xiic: return value of xiic_reinit, Wolfram Sang
  • [PATCH 4/4] i2c: xiic: Fix Tx Interrupt path for grouped messages, Shubhrajyoti Datta
    • Re: [PATCH 4/4] i2c: xiic: Fix Tx Interrupt path for grouped messages, Michal Simek
    • Re: [PATCH 4/4] i2c: xiic: Fix Tx Interrupt path for grouped messages, Wolfram Sang
• Re: Supplies needed from INDIA, reply for details, GCAP Supplies
• [v8 0/3] Add support for Maxim MAX735x/MAX736x variants, Patrick Rudolph
  • [v8 3/3] i2c: muxes: pca954x: Add regulator support, Patrick Rudolph
  • [v8 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants, Patrick Rudolph
    • Re: [v8 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants, Laurent Pinchart
    • Re: [v8 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants, Rob Herring
  • [v8 2/3] i2c: muxes: pca954x: Add MAX735x/MAX736x support, Patrick Rudolph
    • Re: [v8 2/3] i2c: muxes: pca954x: Add MAX735x/MAX736x support, Peter Rosin
• [PATCH] misc/eeprom: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, cgel . zte
  • Re: [PATCH] misc/eeprom: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, Bartosz Golaszewski
• [PATCH 0/8] i2c: i801: Series with minor improvements, Heiner Kallweit
  • [PATCH 3/8] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER, Heiner Kallweit
    • Re: [PATCH 3/8] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER, Jean Delvare
      • Re: [PATCH 3/8] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER, Heiner Kallweit
  • [PATCH 2/8] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ, Heiner Kallweit
    • Re: [PATCH 2/8] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ, Jean Delvare
      • Re: [PATCH 2/8] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ, Heiner Kallweit
  • [PATCH 1/8] i2c: i801: improve interrupt handler, Heiner Kallweit
    • Re: [PATCH 1/8] i2c: i801: improve interrupt handler, Jean Delvare
      • Re: [PATCH 1/8] i2c: i801: improve interrupt handler, Heiner Kallweit
  • [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions, Heiner Kallweit
    • Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions, Jean Delvare
      • Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions, Jean Delvare
        • Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions, Jean Delvare
          • Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions, Heiner Kallweit
  • [PATCH 5/8] i2c: i801: add helper i801_set_hstadd(), Heiner Kallweit
    • Re: [PATCH 5/8] i2c: i801: add helper i801_set_hstadd(), Jean Delvare
      • Re: [PATCH 5/8] i2c: i801: add helper i801_set_hstadd(), Heiner Kallweit
  • [PATCH 6/8] i2c: i801: add i801_single_transaction(), complementing i801_block_transaction(), Heiner Kallweit
    • Re: [PATCH 6/8] i2c: i801: add i801_single_transaction(), complementing i801_block_transaction(), Jean Delvare
      • Re: [PATCH 6/8] i2c: i801: add i801_single_transaction(), complementing i801_block_transaction(), Heiner Kallweit
  • [PATCH 7/8] i2c: i801: call i801_check_pre() from i801_access(), Heiner Kallweit
    • Re: [PATCH 7/8] i2c: i801: call i801_check_pre() from i801_access(), Jean Delvare
  • [PATCH 8/8] i2c: i801: call i801_check_post() from i801_access(), Heiner Kallweit
    • Re: [PATCH 8/8] i2c: i801: call i801_check_post() from i801_access(), Jean Delvare
      • Re: [PATCH 8/8] i2c: i801: call i801_check_post() from i801_access(), Heiner Kallweit
• [PATCH 0/3] i2c: gpio: support write-only sda, Heiner Kallweit
  • [PATCH 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only, Heiner Kallweit
    • Re: [PATCH 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only, Rob Herring
  • [PATCH 2/3] i2c: algo: bit: allow getsda to be NULL, Heiner Kallweit
  • [PATCH 3/3] i2c: gpio: support write-only sda, Heiner Kallweit
• Re: [PATCH v2] media: ov5640: Use runtime PM, Sakari Ailus
  • Re: [PATCH v2] media: ov5640: Use runtime PM, Tomasz Figa
    • Re: [PATCH v2] media: ov5640: Use runtime PM, Tomasz Figa
      • Re: [PATCH v2] media: ov5640: Use runtime PM, Laurent Pinchart
      • Re: [PATCH v2] media: ov5640: Use runtime PM, Sakari Ailus
• [PATCH] i2c: i2c-davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, cgel . zte
  • Re: [PATCH] i2c: i2c-davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, Bartosz Golaszewski
  • Re: [PATCH] i2c: i2c-davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, Wolfram Sang
• [PATCH] i2c: rcar: use flags instead of atomic_xfer, Kuninori Morimoto
• [PATCH] i2c: rcar: call pm_runtime_put() only if it has ID_P_PM_BLOCKED, Kuninori Morimoto
  • Re: [PATCH] i2c: rcar: call pm_runtime_put() only if it has ID_P_PM_BLOCKED, Wolfram Sang
• [PATCH v2 RESEND] i2c: cadence: Increase timeout per message if necessary, Lucas Tanure
  • Re: [PATCH v2 RESEND] i2c: cadence: Increase timeout per message if necessary, Wolfram Sang
• Re: [PATCH] i2c: amd-mp2: Remove name from maintainers list, Shyam Sundar S K
• [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error, Bjorn Andersson
  • Re: [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error, Vinod Koul
    • Re: [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error, Vinod Koul
  • Re: [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error, Wolfram Sang
• [PATCH v2 0/2] i2c: Allow disabling auto detection via devicetree, Vincent Whitchurch
  • [PATCH v2 2/2] i2c: core: support no-detect property, Vincent Whitchurch
  • [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Vincent Whitchurch
    • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Krzysztof Kozlowski
    • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Rob Herring
      • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Vincent Whitchurch
        • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Rob Herring
    • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Wolfram Sang
      • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Vincent Whitchurch
        • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Wolfram Sang
      • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Peter Rosin
        • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Peter Rosin
          • Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection, Luca Ceresoli
• [PATCH v1 1/2] i2c: dev: check return value when calling dev_set_name(), Andy Shevchenko
  • [PATCH v1 2/2] i2c: dev: Force case user pointers in compat_i2cdev_ioctl(), Andy Shevchenko
    • Re: [PATCH v1 2/2] i2c: dev: Force case user pointers in compat_i2cdev_ioctl(), Wolfram Sang
  • Re: [PATCH v1 1/2] i2c: dev: check return value when calling dev_set_name(), Wolfram Sang
• [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking, AngeloGioacchino Del Regno
  • Re: [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking, AngeloGioacchino Del Regno
  • Re: [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking, Qii Wang
  • Re: [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking, Wolfram Sang
• [PATCH v2 0/2] Ensure High and Low periods of SCL are correct, Lucas Tanure
  • [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock, Lucas Tanure
    • Re: [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock, Neil Armstrong
    • Re: [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock, Wolfram Sang
  • [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions, Lucas Tanure
    • Re: [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions, Neil Armstrong
    • Re: [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions, Wolfram Sang
  • Re: [PATCH v2 0/2] Ensure High and Low periods of SCL are correct, Neil Armstrong
• [PATCH] i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit, Marek Vasut
  • Re: [PATCH] i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit, Oleksij Rempel
  • Re: [PATCH] i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit, Wolfram Sang
• [PATCH v2] i2c: at91: use dma safe buffers, Michael Walle
  • Re: [PATCH v2] i2c: at91: use dma safe buffers, Michael Walle
  • Re: [PATCH v2] i2c: at91: use dma safe buffers, Wolfram Sang
    • Re: [PATCH v2] i2c: at91: use dma safe buffers, Michael Walle
  • Re: [PATCH v2] i2c: at91: use dma safe buffers, Nathan Chancellor
    • Re: [PATCH v2] i2c: at91: use dma safe buffers, Michael Walle
      • Re: [PATCH v2] i2c: at91: use dma safe buffers, Nathan Chancellor
• [PATCH v2] dt-bindings: i2c: convert i2c-mt65xx to json-schema, AngeloGioacchino Del Regno
  • Re: [PATCH v2] dt-bindings: i2c: convert i2c-mt65xx to json-schema, Rob Herring
  • Re: [PATCH v2] dt-bindings: i2c: convert i2c-mt65xx to json-schema, Miles Chen
• [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema, AngeloGioacchino Del Regno
  • Re: [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema, Miles Chen
    • Re: [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema, AngeloGioacchino Del Regno
• [PATCH] HID: mcp2221: fix hang on probe while setting up gpiochip, gavin
• [PATCH 0/2] i2c: Allow disabling auto detection via devicetree, Vincent Whitchurch
  • [PATCH 2/2] i2c: core: support no-detect property, Vincent Whitchurch
  • [PATCH 1/2] i2c: add binding to prevent device detection, Vincent Whitchurch
    • Re: [PATCH 1/2] i2c: add binding to prevent device detection, Krzysztof Kozlowski
      • Re: [PATCH 1/2] i2c: add binding to prevent device detection, Vincent Whitchurch
        • Re: [PATCH 1/2] i2c: add binding to prevent device detection, Krzysztof Kozlowski
          • Re: [PATCH 1/2] i2c: add binding to prevent device detection, Krzysztof Kozlowski
• [PATCH 05/11] i2c: ismt: Fix undefined behavior due to shift overflowing the constant, Borislav Petkov
  • Re: [PATCH 05/11] i2c: ismt: Fix undefined behavior due to shift overflowing the constant, Seth Heasley
• [v7 0/3] Add support for Maxim MAX735x/MAX736x variants, Patrick Rudolph
  • [v7 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants, Patrick Rudolph
    • Re: [v7 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants, Laurent Pinchart
      • Re: [v7 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants, Rob Herring
  • [v7 2/3] i2c: muxes: pca954x: Add MAX735x/MAX736x support, Patrick Rudolph
  • [v7 3/3] i2c: muxes: pca954x: Add regulator support, Patrick Rudolph
• [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Wolfram Sang
  • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Eugeniu Rosca
    • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Wolfram Sang
  • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Gabbasov, Andrew
    • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Wolfram Sang
      • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Gabbasov, Andrew
        • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Wolfram Sang
  • Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN, Wolfram Sang
• [PATCH v4 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema, Krzysztof Kozlowski
  • [PATCH v4 1/9] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema, Krzysztof Kozlowski
  • [PATCH v4 3/9] ARM: dts: qcom: ipq4019: align dmas in SPI/UART with DT schema, Krzysztof Kozlowski
  • [PATCH v4 4/9] ARM: dts: qcom: ipq4019: align clocks in I2C with DT schema, Krzysztof Kozlowski
  • [PATCH v4 5/9] ARM: dts: qcom: msm8660: disable GSBI8, Krzysztof Kozlowski
  • [PATCH v4 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v4 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema, Mark Brown
  • [PATCH v4 2/9] arm64: dts: qcom: align clocks in I2C/SPI with DT schema, Krzysztof Kozlowski
  • [PATCH v4 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema, Krzysztof Kozlowski
  • [PATCH v4 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v4 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema, Wolfram Sang
  • [PATCH v4 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v4 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema, Rob Herring
  • Re: [PATCH v4 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema, Rob Herring
• [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings, Kuldeep Singh
  • Re: [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings, Krzysztof Kozlowski
  • Re: [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings, Kuldeep Singh
  • Re: [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings, Rob Herring
• [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe, Miaoqian Lin
  • Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe, Wolfram Sang
    • Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe, Christophe JAILLET
      • Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe, Miaoqian Lin
      • Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe, Wolfram Sang
• [PATCH v3 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema, Krzysztof Kozlowski
  • [PATCH v3 1/9] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema, Krzysztof Kozlowski
  • [PATCH v3 2/9] arm64: dts: qcom: align clocks in I2C/SPI with DT schema, Krzysztof Kozlowski
  • [PATCH v3 3/9] ARM: dts: qcom: ipq4019: align dmas in SPI/UART with DT schema, Krzysztof Kozlowski
  • [PATCH v3 5/9] ARM: dts: qcom: msm8660: disable GSBI8, Krzysztof Kozlowski
  • [PATCH v3 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v3 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema, Rob Herring
      • Re: [PATCH v3 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema, Krzysztof Kozlowski
  • [PATCH v3 4/9] ARM: dts: qcom: ipq4019: align clocks in I2C with DT schema, Krzysztof Kozlowski
  • [PATCH v3 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v3 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema, Rob Herring
  • [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema, Kuldeep Singh
      • Re: [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema, Krzysztof Kozlowski
        • Re: [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema, Kuldeep Singh
    • Re: [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema, Rob Herring
  • [PATCH v3 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema, Krzysztof Kozlowski
    • Re: [PATCH v3 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema, Rob Herring
• [PATCH] i2c: powermac: Prepare cleanup of powerpc's asm/prom.h, Christophe Leroy
  • Re: [PATCH] i2c: powermac: Prepare cleanup of powerpc's asm/prom.h, Wolfram Sang
• [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings, Kuldeep Singh
  • Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings, Krzysztof Kozlowski
    • Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings, Kuldeep Singh
      • Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings, Krzysztof Kozlowski
  • Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings, Krzysztof Kozlowski
    • Re: [PATCH 1/5] dt-bindings: i2c: Add Qualcomm Geni based QUP i2c bindings, Kuldeep Singh
• [PATCH] i2c: mediatek: Optimize master_xfer() and avoid circular locking, AngeloGioacchino Del Regno
  • Re: [PATCH] i2c: mediatek: Optimize master_xfer() and avoid circular locking, Nícolas F. R. A. Prado
• [PATCH v5 0/3] WCH CH341 GPIO and SPI support, frank zago
  • [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode, frank zago
    • Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode, Lee Jones
      • Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode, Frank Zago
    • Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode, Johan Hovold
      • Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode, Frank Zago
  • [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, frank zago
    • Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, Sergey Shtylyov
    • Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, Wolfram Sang
      • Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, Johan Hovold
        • Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, Wolfram Sang
      • Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, Frank Zago
    • Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341, Lee Jones
  • [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341, frank zago
    • Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341, Linus Walleij
    • Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341, Johan Hovold
      • Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341, Frank Zago
        • Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341, Johan Hovold
• [RFC Patch v4 0/1] i2c statistics as sysfs attributes, Sui Chen
  • [RFC Patch v4 1/1] i2c debug counters as sysfs attributes, Sui Chen
    • Re: [RFC Patch v4 1/1] i2c debug counters as sysfs attributes, Avi Fishman
      • Re: [RFC Patch v4 1/1] i2c debug counters as sysfs attributes, Sui Chen
        • Re: [RFC Patch v4 1/1] i2c debug counters as sysfs attributes, Avi Fishman
• [syzbot] KASAN: use-after-free Read in i2c_put_adapter, syzbot
  • Re: [syzbot] KASAN: use-after-free Read in i2c_put_adapter, Wolfram Sang
• [PATCH] i2c: mv64xxx: Add atomic_xfer method to driver, Chris Morgan
  • Re: [PATCH] i2c: mv64xxx: Add atomic_xfer method to driver, Wolfram Sang
    • Re: [PATCH] i2c: mv64xxx: Add atomic_xfer method to driver, Gregory CLEMENT
• [PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage, Wolfram Sang
  • Re: [PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage, Jean Delvare
  • Re: [PATCH i2c-tools] i2cget: add mode character for SMBus block read to manpage, Wolfram Sang
• Re: i2ctransfer-like tool with stdin not argv?, Wolfram Sang
• [PATCH] i2c: pasemi: Wait for write xfers to finish, Martin Povišer
  • Re: [PATCH] i2c: pasemi: Wait for write xfers to finish, Sven Peter
  • Re: [PATCH] i2c: pasemi: Wait for write xfers to finish, Wolfram Sang
• [PATCH 0/3] Ensure Low period of SCL is correct, Lucas Tanure
  • [PATCH 3/3] i2c: meson: Remove meson_i2c_data, Lucas Tanure
  • [PATCH 1/3] i2c: meson: Use _SHIFT and _MASK for register definitions, Lucas Tanure
  • [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock, Lucas Tanure
    • Re: [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock, Neil Armstrong
    • Re: [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock, Neil Armstrong
      • Re: [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock, Lucas Tanure
  • Re: [PATCH 0/3] Ensure Low period of SCL is correct, Kevin Hilman
    • Re: [PATCH 0/3] Ensure Low period of SCL is correct, Lucas Tanure
      • Re: [PATCH 0/3] Ensure Low period of SCL is correct, Neil Armstrong
        • Re: [PATCH 0/3] Ensure Low period of SCL is correct, Vyacheslav
    • Message not available
      • Re: [PATCH 0/3] Ensure Low period of SCL is correct, Neil Armstrong
        • Re: [PATCH 0/3] Ensure Low period of SCL is correct, Lucas Tanure
• [PATCH] docs: i2c: reference simple probes, Stephen Kitt
  • Re: [PATCH] docs: i2c: reference simple probes, Wolfram Sang
• [PATCH] i2c: mv64xxx: Remove shutdown method from driver, Chris Morgan
  • Re: [PATCH] i2c: mv64xxx: Remove shutdown method from driver, Wolfram Sang
    • Re: [PATCH] i2c: mv64xxx: Remove shutdown method from driver, Gregory CLEMENT
• [PATCH v3 0/9] introduce fwnode in the I2C subsystem, Clément Léger
  • [PATCH v3 1/9] of: add of_property_read_string_array_index(), Clément Léger
    • Re: [PATCH v3 1/9] of: add of_property_read_string_array_index(), Rob Herring
  • [PATCH v3 6/9] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
    • Re: [PATCH v3 6/9] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Andy Shevchenko
      • Re: [PATCH v3 6/9] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
        • Re: [PATCH v3 6/9] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Andy Shevchenko
          • Re: [PATCH v3 6/9] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
            • Re: [PATCH v3 6/9] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Andy Shevchenko
  • [PATCH v3 5/9] device property: add tests for fwnode_property_read_string_index(), Clément Léger
  • [PATCH v3 2/9] of: unittests: add tests for of_property_read_string_array_index(), Clément Léger
    • Re: [PATCH v3 2/9] of: unittests: add tests for of_property_read_string_array_index(), Rob Herring
  • [PATCH v3 7/9] i2c: of: use fwnode_get_i2c_adapter_by_node(), Clément Léger
  • [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback, Clément Léger
    • Re: [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback, Andy Shevchenko
      • Re: [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback, Clément Léger
        • Re: [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback, Rafael J. Wysocki
          • Re: [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback, Clément Léger
  • [PATCH v3 9/9] i2c: mux: add support for fwnode, Clément Léger
  • [PATCH v3 4/9] device property: add fwnode_property_read_string_index(), Clément Léger
    • Re: [PATCH v3 4/9] device property: add fwnode_property_read_string_index(), Andy Shevchenko
      • Re: [PATCH v3 4/9] device property: add fwnode_property_read_string_index(), Clément Léger
  • [PATCH v3 8/9] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Clément Léger
    • Re: [PATCH v3 8/9] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Andy Shevchenko
    • Re: [PATCH v3 8/9] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Peter Rosin
      • Re: [PATCH v3 8/9] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Clément Léger
  • Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem, Wolfram Sang
    • Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem, Peter Rosin
      • Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem, Clément Léger
        • Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem, Wolfram Sang
• [PULL REQUEST] i2c for v5.18, Wolfram Sang
  • Re: [PULL REQUEST] i2c for v5.18, Linus Torvalds
    • Re: [PULL REQUEST] i2c for v5.18, Wolfram Sang
      • Re: [PULL REQUEST] i2c for v5.18, Jean Delvare
        • Re: [PULL REQUEST] i2c for v5.18, Linus Torvalds
  • Re: [PULL REQUEST] i2c for v5.18, pr-tracker-bot
  • Re: [PULL REQUEST] i2c for v5.18, Linus Torvalds
    • Re: [PULL REQUEST] i2c for v5.18, Wolfram Sang
  • <Possible follow-ups>
  • [PULL REQUEST] i2c for v5.18, Wolfram Sang
    • Re: [PULL REQUEST] i2c for v5.18, Linus Torvalds
    • Re: [PULL REQUEST] i2c for v5.18, pr-tracker-bot
  • [PULL REQUEST] i2c for v5.18, Wolfram Sang
    • Re: [PULL REQUEST] i2c for v5.18, pr-tracker-bot
• [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Laurent Pinchart
  • Re: [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Jonathan Cameron
    • Re: [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Laurent Pinchart
      • Re: [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Jonathan Cameron
        • Re: [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Jonathan Cameron
          • Re: [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Laurent Pinchart
  • Re: [PATCH v2] iio: dac: dac5571: Fix chip id detection for OF devices, Andy Shevchenko
• [PATCH v2 0/7] introduce fwnode in the I2C subsystem, Clément Léger
  • [PATCH v2 3/7] software node: implement .property_read_string_index callback, Clément Léger
  • [PATCH v2 4/7] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
  • [PATCH v2 1/7] device property: add fwnode_property_read_string_index(), Clément Léger
    • Re: [PATCH v2 1/7] device property: add fwnode_property_read_string_index(), Sakari Ailus
      • Re: [PATCH v2 1/7] device property: add fwnode_property_read_string_index(), Clément Léger
        • Re: [PATCH v2 1/7] device property: add fwnode_property_read_string_index(), Sakari Ailus
  • [PATCH v2 2/7] of: property: implement .property_read_string_index callback, Clément Léger
  • [PATCH v2 6/7] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Clément Léger
  • [PATCH v2 7/7] i2c: mux: add support for fwnode, Clément Léger
  • [PATCH v2 5/7] i2c: of: use fwnode_get_i2c_adapter_by_node(), Clément Léger
• [PATCH v2] i2c: cadence: Increase timeout per message if necessary, Lucas Tanure
• [PATCH] i2c: tegra: fix reference leak when pm_runtime_get_sync fails, Zhen Ni
• [PATCH v2] i2c: add support for microchip fpga i2c controllers, Conor Dooley
  • Re: [PATCH v2] i2c: add support for microchip fpga i2c controllers, Conor.Dooley
    • Re: [PATCH v2] i2c: add support for microchip fpga i2c controllers, Conor Dooley
  • <Possible follow-ups>
  • Re: [PATCH v2] i2c: add support for microchip fpga i2c controllers, Conor.Dooley
• [PATCH v4 0/3] WCH CH341 GPIO and SPI support, frank zago
  • [PATCH v4 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/GPIO mode, frank zago
    • Re: [PATCH v4 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/GPIO mode, Andy Shevchenko
  • [PATCH v4 2/3] gpio: ch341: add MFD cell driver for the CH341, frank zago
    • Re: [PATCH v4 2/3] gpio: ch341: add MFD cell driver for the CH341, Andy Shevchenko
    • Re: [PATCH v4 2/3] gpio: ch341: add MFD cell driver for the CH341, Linus Walleij
  • [PATCH v4 3/3] i2c: ch341: add MFD cell driver CH341 for I2C, frank zago
• [RFC DNM PATCH] i2c: busses: qcom-cci: Add support for passing data in DT, Konrad Dybcio
  • Re: [RFC DNM PATCH] i2c: busses: qcom-cci: Add support for passing data in DT, Bjorn Andersson
    • Re: [RFC DNM PATCH] i2c: busses: qcom-cci: Add support for passing data in DT, Konrad Dybcio
• [PATCH v3] i2c: add tracepoints for I2C slave events, Jae Hyun Yoo
  • Re: [PATCH v3] i2c: add tracepoints for I2C slave events, Wolfram Sang
• [PATCH 0/6] introduce fwnode in the I2C subsystem, Clément Léger
  • [PATCH 2/6] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
    • Re: [PATCH 2/6] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Andy Shevchenko
      • Re: [PATCH 2/6] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
  • [PATCH 3/6] i2c: of: use fwnode_get_i2c_adapter_by_node(), Clément Léger
  • [PATCH 1/6] property: add fwnode_property_read_string_index(), Clément Léger
    • Re: [PATCH 1/6] property: add fwnode_property_read_string_index(), Andy Shevchenko
      • Re: [PATCH 1/6] property: add fwnode_property_read_string_index(), Clément Léger
        • Re: [PATCH 1/6] property: add fwnode_property_read_string_index(), Andy Shevchenko
          • Re: [PATCH 1/6] property: add fwnode_property_read_string_index(), Clément Léger
            • Re: [PATCH 1/6] property: add fwnode_property_read_string_index(), Andy Shevchenko
              • Re: [PATCH 1/6] property: add fwnode_property_read_string_index(), Clément Léger
  • [PATCH 4/6] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Clément Léger
    • Re: [PATCH 4/6] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Andy Shevchenko
      • Re: [PATCH 4/6] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Clément Léger
        • Re: [PATCH 4/6] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Andy Shevchenko
  • [PATCH 0/6] introduce fwnode in the I2C subsystem, Clément Léger
  • [PATCH 5/6] i2c: mux: add support for fwnode, Clément Léger
  • [PATCH 6/6] net: sfp: add support for fwnode, Clément Léger
    • Re: [PATCH 6/6] net: sfp: add support for fwnode, Andy Shevchenko
      • Re: [PATCH 6/6] net: sfp: add support for fwnode, Clément Léger
  • [PATCH 2/6] i2c: fwnode: add fwnode_find_i2c_adapter_by_node(), Clément Léger
  • [PATCH 1/6] property: add fwnode_property_read_string_index(), Clément Léger
  • [PATCH 6/6] net: sfp: add support for fwnode, Clément Léger
  • [PATCH 3/6] i2c: of: use fwnode_get_i2c_adapter_by_node(), Clément Léger
  • [PATCH 4/6] i2c: mux: pinctrl: remove CONFIG_OF dependency and use fwnode API, Clément Léger
  • [PATCH 5/6] i2c: mux: add support for fwnode, Clément Léger
  • Re: [PATCH 0/6] introduce fwnode in the I2C subsystem, Andy Shevchenko
    • Re: [PATCH 0/6] introduce fwnode in the I2C subsystem, Clément Léger
  • Re: [PATCH 0/6] introduce fwnode in the I2C subsystem, Jakub Kicinski
    • Re: [PATCH 0/6] introduce fwnode in the I2C subsystem, Clément Léger
      • Re: [PATCH 0/6] introduce fwnode in the I2C subsystem, Jakub Kicinski
        • Re: [PATCH 0/6] introduce fwnode in the I2C subsystem, Clément Léger
• [PATCH] i2c: busses: Fix error handling in synquacer_i2c_probe, Miaoqian Lin
  • Message not available
    • Re: [PATCH] i2c: busses: Fix error handling in synquacer_i2c_probe, Miaoqian Lin
      • Re: [PATCH] i2c: busses: Fix error handling in synquacer_i2c_probe, Andy Shevchenko
• [PATCH] i2c: add support for microchip fpga i2c controllers, Conor Dooley
  • Re: [PATCH] i2c: add support for microchip fpga i2c controllers, Ben Dooks
    • Re: [PATCH] i2c: add support for microchip fpga i2c controllers, Conor Dooley
• [PATCH v8 00/16] clk: provide new devm helpers for prepared and enabled clocks, Uwe Kleine-König
  • [PATCH v8 14/16] i2c: imx: Simplify using devm_clk_get_enabled(), Uwe Kleine-König
  • [PATCH v8 01/16] clk: generalize devm_clk_get() a bit, Uwe Kleine-König
    • Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit, Jon Hunter
      • Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit, Uwe Kleine-König
        • Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit, Andy Shevchenko
          • Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit, Neil Armstrong
        • Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit, Jon Hunter