Hi,
On 29/03/2022 00:31, Lucas Tanure wrote:
On Mon, 28 Mar 2022, 21:37 Kevin Hilman, <khilman@xxxxxxxxxxxx> wrote:
Hi Lucas,
Lucas Tanure <tanure@xxxxxxxxx> writes:
The default duty cycle of 33% is less than the required
by the I2C specs for the LOW period of the SCL clock.
So, for 100Khz or less, use 50%H/50%L duty cycle, and
for the clock above 100Khz, use 40%H/60%L duty cycle.
That ensures the low period of SCL is always more than
the minimum required by the specs at any given frequency.
Thanks for the fixes!
This is going to affect all SoCs, so ould you please summarize how your
changes were tested, and on which SoCs & boards?
Thanks,
Kevin
Hi,
I only tested against the vim3 board, measured the bus with a Saleae
logic pro 16.
The measurements were with 100k, 400k, and a few in-between frequencies.
Thanks, it's a great addition to have !
Is that enough?
A test on GXL/GXM (VIM1 or VIM2) & GXBB (Odroid-C2) devices is lacking before we
can merge this.
If I find some time, I'll have a try, but everyone is welcome testing this serie
and report if it still works fine for them.
Vyacheslav, do you think you can test on your JetHub devices ? it would validate GXL & AXG.
Neil
Thanks
Lucas
