The GPIO interface offers 16 GPIOs. 6 are read/write, and 10 are
read-only.
Signed-off-by: frank zago <frank@xxxxxxxx>
---
MAINTAINERS | 1 +
drivers/gpio/Kconfig | 10 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ch341.c | 421 ++++++++++++++++++++++++++++++++++++++
drivers/mfd/ch341-core.c | 3 +
5 files changed, 436 insertions(+)
create mode 100644 drivers/gpio/gpio-ch341.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a6b2805fd1a1..fdff76a5d9b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20849,6 +20849,7 @@ WINCHIPHEAD CH341 I2C/GPIO MFD DRIVER
M: Frank Zago <frank@xxxxxxxx>
L: linux-usb@xxxxxxxxxxxxxxx
S: Maintained
+F: drivers/gpio/gpio-ch341.c
F: drivers/mfd/ch341-core.c
F: include/linux/mfd/ch341.h
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 1c211b4c63be..02a1624cd736 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1634,6 +1634,16 @@ endmenu
menu "USB GPIO expanders"
depends on USB
+config GPIO_CH341
+ tristate "CH341 USB adapter in GPIO/I2C/SPI mode"
+ depends on MFD_CH341
+ help
+ If you say yes to this option, GPIO support will be included for the
+ WCH CH341, a USB to I2C/SPI/GPIO interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-ch341.
+
config GPIO_VIPERBOARD
tristate "Viperboard GPIO a & b support"
depends on MFD_VIPERBOARD
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index edbaa3cb343c..b2b47b185257 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o
+obj-$(CONFIG_GPIO_CH341) += gpio-ch341.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
diff --git a/drivers/gpio/gpio-ch341.c b/drivers/gpio/gpio-ch341.c
new file mode 100644
index 000000000000..faa224372473
--- /dev/null
+++ b/drivers/gpio/gpio-ch341.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO cell driver for the CH341A and CH341B chips.
+ *
+ * Copyright 2022, Frank Zago
+ * Copyright (c) 2017 Gunar Schorcht (gunar@xxxxxxxxxxxx)
+ * Copyright (c) 2016 Tse Lun Bien
+ * Copyright (c) 2014 Marco Gittler
+ * Copyright (c) 2006-2007 Till Harbaum (Till@xxxxxxxxxxx)
+ */
+
+/* Notes.
+ *
+ * For the CH341, 0=IN, 1=OUT, but for the GPIO subsystem, 1=IN and
+ * 0=OUT. Some translation happens in a couple places.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/ch341.h>
+
+#define CH341_GPIO_NUM_PINS 16 /* Number of GPIO pins */
+
+#define CH341_PARA_CMD_STS 0xA0 /* Get pins status */
+#define CH341_CMD_UIO_STREAM 0xAB /* UIO stream command */
+
+#define CH341_CMD_UIO_STM_OUT 0x80 /* UIO interface OUT command (D0~D5) */
+#define CH341_CMD_UIO_STM_DIR 0x40 /* UIO interface DIR command (D0~D5) */
+#define CH341_CMD_UIO_STM_END 0x20 /* UIO interface END command */
+
+#define CH341_USB_MAX_INTR_SIZE 8
+
+struct ch341_gpio {
+ struct gpio_chip gpio;
+ struct mutex gpio_lock;
+ u16 gpio_dir; /* 1 bit per pin, 0=IN, 1=OUT. */
+ u16 gpio_last_read; /* last GPIO values read */
+ u16 gpio_last_written; /* last GPIO values written */
+ u8 gpio_buf[SEG_SIZE];
+
+ struct {
+ char name[32];
+ bool enabled;
+ struct irq_chip irq;
+ int num;
+ struct urb *urb;
+ struct usb_anchor urb_out;
+ u8 buf[CH341_USB_MAX_INTR_SIZE];
+ } gpio_irq;
+
+ struct ch341_device *ch341;
+};
+
+/* Masks to describe the 16 GPIOs. Pins D0 to D5 (mapped to GPIOs 0 to
+ * 5) can read/write, but the other pins can only read.
+ */
+static const u16 pin_can_output = 0b111111;
+
+/* Only GPIO 10 (INT# line) has hardware interrupt */
+#define CH341_GPIO_INT_LINE 10
+
+static void ch341_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+
+ seq_printf(s, "pin config : %04x (0=IN, 1=OUT)\n", dev->gpio_dir);
+ seq_printf(s, "last read : %04x\n", dev->gpio_last_read);
+ seq_printf(s, "last written: %04x\n", dev->gpio_last_written);
+}
+
+/* Send a command and get a reply if requested */
+static int gpio_transfer(struct ch341_gpio *dev, int out_len, int in_len)
+{
+ struct ch341_device *ch341 = dev->ch341;
+ int actual;
+ int rc;
+
+ mutex_lock(&ch341->usb_lock);
+
+ rc = usb_bulk_msg(ch341->usb_dev,
+ usb_sndbulkpipe(ch341->usb_dev, ch341->ep_out),
+ dev->gpio_buf, out_len,
+ &actual, DEFAULT_TIMEOUT);
+ if (rc < 0)
+ goto done;
+
+ if (in_len == 0) {
+ rc = actual;
+ goto done;
+ }
+
+ rc = usb_bulk_msg(ch341->usb_dev,
+ usb_rcvbulkpipe(ch341->usb_dev, ch341->ep_in),
+ dev->gpio_buf, SEG_SIZE, &actual, DEFAULT_TIMEOUT);
+
+ if (rc == 0)
+ rc = actual;
+
+done:
+ mutex_unlock(&ch341->usb_lock);
+
+ return rc;
+}
+
+/* Read the GPIO line status. */
+static int read_inputs(struct ch341_gpio *dev)
+{
+ int result;
+
+ mutex_lock(&dev->gpio_lock);
+
+ dev->gpio_buf[0] = CH341_PARA_CMD_STS;
+
+ result = gpio_transfer(dev, 1, 1);
+
+ /* The status command returns 6 bytes of data. Byte 0 has
+ * status for lines 0 to 7, and byte 1 is lines 8 to 15. The
+ * 3rd has the status for the SCL/SDA/SCK pins. The 4th byte
+ * might have some remaining pin status. Byte 5 and 6 content
+ * is unknown.
+ */
+ if (result == 6)
+ dev->gpio_last_read = le16_to_cpu(*(__le16 *)dev->gpio_buf);
+
+ mutex_unlock(&dev->gpio_lock);
+
+ return (result != 6) ? result : 0;
+}
+
+static int ch341_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+ int rc;
+
+ rc = read_inputs(dev);
+ if (rc)
+ return rc;
+
+ return (dev->gpio_last_read & BIT(offset)) ? 1 : 0;
+}
+
+static int ch341_gpio_get_multiple(struct gpio_chip *chip,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+ int rc;
+
+ rc = read_inputs(dev);
+ if (rc)
+ return rc;
+
+ *bits = dev->gpio_last_read & *mask;
+
+ return 0;
+}
+
+static void write_outputs(struct ch341_gpio *dev)
+{
+ mutex_lock(&dev->gpio_lock);
+
+ dev->gpio_buf[0] = CH341_CMD_UIO_STREAM;
+ dev->gpio_buf[1] = CH341_CMD_UIO_STM_DIR | dev->gpio_dir;
+ dev->gpio_buf[2] = CH341_CMD_UIO_STM_OUT | (dev->gpio_last_written & dev->gpio_dir);
+ dev->gpio_buf[3] = CH341_CMD_UIO_STM_END;
+
+ gpio_transfer(dev, 4, 0);
+
+ mutex_unlock(&dev->gpio_lock);
+}
+
+static void ch341_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+
+ if (value)
+ dev->gpio_last_written |= BIT(offset);
+ else
+ dev->gpio_last_written &= ~BIT(offset);
+
+ write_outputs(dev);
+}
+
+static void ch341_gpio_set_multiple(struct gpio_chip *chip,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+
+ dev->gpio_last_written &= ~*mask;
+ dev->gpio_last_written |= (*bits & *mask);
+
+ write_outputs(dev);
+}
+
+static int ch341_gpio_get_direction(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+
+ return (dev->gpio_dir & BIT(offset)) ? 0 : 1;
+}
+
+static int ch341_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+
+ dev->gpio_dir &= ~BIT(offset);
+
+ write_outputs(dev);
+
+ return 0;
+}
+
+static int ch341_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+ u16 mask = BIT(offset);
+
+ if (!(pin_can_output & mask))
+ return -EINVAL;
+
+ dev->gpio_dir |= mask;
+
+ ch341_gpio_set(chip, offset, value);
+
+ return 0;
+}
+
+static void ch341_complete_intr_urb(struct urb *urb)
+{
+ struct ch341_gpio *dev = urb->context;
+ int rc;
+
+ if (!urb->status) {
+ /* Data is 8 bytes. Byte 0 might be the length of
+ * significant data, which is 3 more bytes. Bytes 1
+ * and 2, and possibly 3, are the pin status. The byte
+ * order is different than for the GET_STATUS
+ * command. Byte 1 is GPIOs 8 to 15, and byte 2 is
+ * GPIOs 0 to 7.
+ *
+ * Something like this (with locking?) could be done,
+ * but there's nothing to retrieve that info without
+ * doing another USB read:
+ *
+ * dev->gpio_last_read = be16_to_cpu(*(u16 *)&dev->gpio_buf_intr[1]);
+ */
+
+ handle_nested_irq(dev->gpio_irq.num);
+
+ rc = usb_submit_urb(dev->gpio_irq.urb, GFP_ATOMIC);
+ if (rc)
+ usb_unanchor_urb(dev->gpio_irq.urb);
+ } else {
+ usb_unanchor_urb(dev->gpio_irq.urb);
+ }
+}
+
+static int ch341_gpio_irq_set_type(struct irq_data *data, u32 type)
+{
+ struct ch341_gpio *dev = irq_data_get_irq_chip_data(data);
+
+ if (data->irq != dev->gpio_irq.num || type != IRQ_TYPE_EDGE_RISING)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void ch341_gpio_irq_enable(struct irq_data *data)
+{
+ struct ch341_gpio *dev = irq_data_get_irq_chip_data(data);
+ int rc;
+
+ dev->gpio_irq.enabled = true;
+
+ /* The URB might have just been unlinked in
+ * ch341_gpio_irq_disable, but the completion handler hasn't
+ * been called yet.
+ */
+ if (!usb_wait_anchor_empty_timeout(&dev->gpio_irq.urb_out, 5000))
+ usb_kill_anchored_urbs(&dev->gpio_irq.urb_out);
+
+ usb_anchor_urb(dev->gpio_irq.urb, &dev->gpio_irq.urb_out);
+ rc = usb_submit_urb(dev->gpio_irq.urb, GFP_ATOMIC);
+ if (rc)
+ usb_unanchor_urb(dev->gpio_irq.urb);
+}
+
+static void ch341_gpio_irq_disable(struct irq_data *data)
+{
+ struct ch341_gpio *dev = irq_data_get_irq_chip_data(data);
+
+ dev->gpio_irq.enabled = false;
+ usb_unlink_urb(dev->gpio_irq.urb);
+}
+
+/* Convert the GPIO index to the IRQ number */
+static int ch341_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct ch341_gpio *dev = gpiochip_get_data(chip);
+
+ if (offset != CH341_GPIO_INT_LINE)
+ return -ENXIO;
+
+ return dev->gpio_irq.num;
+}
+
+static int ch341_gpio_remove(struct platform_device *pdev)
+{
+ struct ch341_gpio *dev = platform_get_drvdata(pdev);
+
+ usb_kill_anchored_urbs(&dev->gpio_irq.urb_out);
+ gpiochip_remove(&dev->gpio);
+ usb_free_urb(dev->gpio_irq.urb);
+
+ return 0;
+}
+
+static int ch341_gpio_probe(struct platform_device *pdev)
+{
+ struct ch341_device *ch341 = dev_get_drvdata(pdev->dev.parent);
+ struct ch341_gpio *dev;
+ struct gpio_chip *gpio;
+ int rc;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, dev);
+ dev->ch341 = ch341;
+
+ snprintf(dev->gpio_irq.name, sizeof(dev->gpio_irq.name),
+ "ch341-%s-gpio", dev_name(&ch341->usb_dev->dev));
+ dev->gpio_irq.name[sizeof(dev->gpio_irq.name) - 1] = 0;
+
+ gpio = &dev->gpio;
+ gpio->label = "ch341";
+ gpio->parent = &pdev->dev;
+ gpio->owner = THIS_MODULE;
+ gpio->get_direction = ch341_gpio_get_direction;
+ gpio->direction_input = ch341_gpio_direction_input;
+ gpio->direction_output = ch341_gpio_direction_output;
+ gpio->get = ch341_gpio_get;
+ gpio->get_multiple = ch341_gpio_get_multiple;
+ gpio->set = ch341_gpio_set;
+ gpio->set_multiple = ch341_gpio_set_multiple;
+ gpio->dbg_show = ch341_gpio_dbg_show;
+ gpio->base = -1;
+ gpio->ngpio = CH341_GPIO_NUM_PINS;
+ gpio->can_sleep = true;
+ gpio->to_irq = ch341_gpio_to_irq;
+
+ dev->gpio_dir = 0; /* All pins as input */
+
+ mutex_init(&dev->gpio_lock);
+
+ /* Allocate a software driven IRQ, for GPIO 10 */
+ dev->gpio_irq.irq.name = dev->gpio_irq.name;
+ dev->gpio_irq.irq.irq_set_type = ch341_gpio_irq_set_type;
+ dev->gpio_irq.irq.irq_enable = ch341_gpio_irq_enable;
+ dev->gpio_irq.irq.irq_disable = ch341_gpio_irq_disable;
+
+ rc = devm_irq_alloc_desc(&pdev->dev, 0);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Cannot allocate an IRQ desc");
+ return rc;
+ }
+
+ dev->gpio_irq.num = rc;
+ dev->gpio_irq.enabled = false;
+
+ irq_set_chip_data(dev->gpio_irq.num, dev);
+ irq_set_chip_and_handler(dev->gpio_irq.num, &dev->gpio_irq.irq,
+ handle_simple_irq);
+
+ /* Create an URB for handling interrupt */
+ dev->gpio_irq.urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->gpio_irq.urb) {
+ dev_err(&pdev->dev, "Cannot allocate the int URB");
+ return -ENOMEM;
+ }
+
+ usb_fill_int_urb(dev->gpio_irq.urb, ch341->usb_dev,
+ usb_rcvintpipe(ch341->usb_dev, ch341->ep_intr),
+ dev->gpio_irq.buf, CH341_USB_MAX_INTR_SIZE,
+ ch341_complete_intr_urb, dev, ch341->ep_intr_interval);
+
+ init_usb_anchor(&dev->gpio_irq.urb_out);
+
+ rc = gpiochip_add_data(gpio, dev);
+ if (rc) {
+ dev_err(&pdev->dev, "Could not add GPIO\n");
+ goto release_urb;
+ }
+
+ return 0;
+
+release_urb:
+ usb_free_urb(dev->gpio_irq.urb);
+
+ return rc;
+}
+
+static struct platform_driver ch341_gpio_driver = {
+ .driver.name = "ch341-gpio",
+ .probe = ch341_gpio_probe,
+ .remove = ch341_gpio_remove,
+};
+
+module_platform_driver(ch341_gpio_driver);
+
+MODULE_AUTHOR("Various");
+MODULE_DESCRIPTION("CH341 USB to GPIO");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ch341-gpio");
diff --git a/drivers/mfd/ch341-core.c b/drivers/mfd/ch341-core.c
index fbb2897cd956..85e0ae812098 100644
--- a/drivers/mfd/ch341-core.c
+++ b/drivers/mfd/ch341-core.c
@@ -19,6 +19,9 @@
#include <linux/mfd/ch341.h>
static const struct mfd_cell ch341_devs[] = {
+ {
+ .name = "ch341-gpio",
+ },
};
static int ch341_usb_probe(struct usb_interface *iface,
--
2.32.0
