From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Wed, 25 Oct 2017 11:45:48 +0200
Add a jump target so that a specific error message is stored only once
at the end of this function implementation.
Replace two calls of the function "dev_err" by goto statements.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-octeon-platdrv.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon-platdrv.c b/drivers/i2c/busses/i2c-octeon-platdrv.c
index 64bda83e65ac..ac8a1099c523 100644
--- a/drivers/i2c/busses/i2c-octeon-platdrv.c
+++ b/drivers/i2c/busses/i2c-octeon-platdrv.c
@@ -207,10 +207,8 @@ static int octeon_i2c_probe(struct platform_device *pdev)
result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
octeon_i2c_hlc_isr78, 0,
DRV_NAME, i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
+ if (result < 0)
+ goto report_failure;
} else {
i2c->int_enable = octeon_i2c_int_enable;
i2c->int_disable = octeon_i2c_int_disable;
@@ -220,10 +218,8 @@ static int octeon_i2c_probe(struct platform_device *pdev)
result = devm_request_irq(&pdev->dev, i2c->irq,
octeon_i2c_isr, 0, DRV_NAME, i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
+ if (result < 0)
+ goto report_failure;
if (OCTEON_IS_MODEL(OCTEON_CN38XX))
i2c->broken_irq_check = true;
@@ -251,6 +247,8 @@ static int octeon_i2c_probe(struct platform_device *pdev)
dev_info(i2c->dev, "probed\n");
return 0;
+report_failure:
+ dev_err(i2c->dev, "failed to attach interrupt\n");
out:
return result;
};
--
2.14.3
