Changes from V3: - rebase on i2c/for-next - Add patches to convert other drivers using gpio recover to gpiod - Remove legacy gpio - Address minor issues raised in review and add acks received so far Changes from V2: - Rebase on https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git/ i2c/for-next No intentional changes, but needed to move i2c_dw_plat_prepare_clk to common for the master recovery functions to use. which is included as two additional patches. Changes from V1: - In review Andy suggested change the i2c core to use the gpiod I've added a patch that allows the gradual switching of drivers to using gpiod interface. The old interface is preserved so that changes can be made incrementally. - I've update Tim's patch for the designware driver to use the new interface. Tweaked a couple of things to his patch and fixed up things Andy id in last review. The core changes in p1 don't require the get/set scl/sda functions. Hopefully I've done the right thing with preserving authorship and signoff. Phil Reid (6): i2c: Switch to using gpiod interface for gpio bus recovery i2c: designware: move i2c_dw_plat_prepare_clk to common i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk i2c: imx: switch to using gpiod for bus recovery gpios i2c: davinci: switch to using gpiod for bus recovery gpios i2c: remove legacy integer scl/sda gpio for recovery Tim Sander (1): i2c: designware: add i2c gpio recovery option drivers/i2c/busses/i2c-davinci.c | 20 +++++-- drivers/i2c/busses/i2c-designware-common.c | 19 ++++++- drivers/i2c/busses/i2c-designware-core.h | 2 + drivers/i2c/busses/i2c-designware-master.c | 57 ++++++++++++++++++++ drivers/i2c/busses/i2c-designware-platdrv.c | 18 ++----- drivers/i2c/busses/i2c-imx.c | 18 +++---- drivers/i2c/i2c-core-base.c | 83 ++++------------------------- include/linux/i2c.h | 11 ++-- 8 files changed, 120 insertions(+), 108 deletions(-) -- 1.8.3.1
