Re: [PATCH v4] i2c: aspeed: Deassert reset in probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Nov 5, 2017 at 6:49 AM, Wolfram Sang <wsa@xxxxxxxxxxxxx> wrote:
> On Wed, Nov 01, 2017 at 10:53:30AM +1030, Joel Stanley wrote:
>> In order to use i2c from a cold boot, the i2c peripheral must be taken
>> out of reset. We request a shared reset controller each time a bus
>> driver is loaded, as the reset is shared between the 14 i2c buses.
>>
>> On remove the reset is asserted, which only touches the hardware once
>> the last i2c bus is removed.
>>
>> The reset is required as the I2C buses will not work without releasing
>> the reset. Previously the driver only worked with out of tree hacks
>> that released this reset before the driver was loaded. Update the
>> device tree bindings to reflect this.
>>
>> Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
>> ---
>> v4:
>>   - Make reset required and update device tree bindings
>
> For that change, I'd like to have an ack from Rob first. Won't that
> cause problems when you update only the kernel and keep the "old"
> devicetree?

Given it didn't really work as explained above, I'm okay with the change.

Acked-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux