gOn Fri, Oct 13, 2017 at 01:56:40PM +0300, Todor Tomov wrote:
> Add DT binding document for Qualcomm Camera Control Interface driver
>
> CC: Rob Herring <robh+dt@xxxxxxxxxx>
> CC: Mark Rutland <mark.rutland@xxxxxxx>
> CC: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
> ---
> .../devicetree/bindings/i2c/i2c-qcom-cci.txt | 46 ++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> new file mode 100644
> index 0000000..cb1fe15
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> @@ -0,0 +1,46 @@
> +Qualcomm Camera Control Interface controller
> +
> +Required properties:
> + - compatible: Should be one of:
> + - "qcom,cci-v1.0.8" for 8916;
> + - "qcom,cci-v1.4.0" for 8996.
Does using version numbers really buy anything over using SoC names?
> + - #address-cells: Should be <1>.
> + - #size-cells: Should be <0>.
> + - reg: Base address of the controller and length of memory mapped region.
> + - interrupts: Specifier for CCI interrupt.
> + - clocks: List of clock specifiers, one for each entry in clock-names.
> + - clock-names: Should contain:
> + - "mmss_mmagic_ahb" - on 8996 only;
> + - "camss_top_ahb";
> + - "cci_ahb";
> + - "cci";
> + - "camss_ahb".
> +
> +Required properties on 8996:
> + - power-domains: Power domain specifier.
> +
> +Optional:
> + - clock-frequency: Desired I2C bus clock frequency in Hz, defaults to 100 kHz
> + if omitted.
I2C freq? The block has an I2C controller? If so, you should explicitly
state that somewhere in here and show a sensor as a child node.
> +
> +Example:
> +
> + cci@a0c000 {
> + compatible = "qcom,cci-v1.4.0";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xa0c000 0x1000>;
> + interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
> + power-domains = <&mmcc CAMSS_GDSC>;
> + clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
> + <&mmcc CAMSS_TOP_AHB_CLK>,
> + <&mmcc CAMSS_CCI_AHB_CLK>,
> + <&mmcc CAMSS_CCI_CLK>,
> + <&mmcc CAMSS_AHB_CLK>;
> + clock-names = "mmss_mmagic_ahb",
> + "camss_top_ahb",
> + "cci_ahb",
> + "cci",
> + "camss_ahb";
> + clock-frequency = <400000>;
> + };
> --
> 2.7.4
>
