On 11/12/17 12:10, Adrian Fiergolski wrote:
This patch exetends the current i2c-mux-pca954x driver and adds suuport for
a newer PCA984x family of the I2C switches and multiplexers from NXP.
In probe function, the patch supports device ID function, introduced in the
new family, and checks it against configuration provided by the
devicetree. Moreover, it also performs software reset which is now
available for the new devices.
The reset of the code remains common with the legacy PCA954x devices.
Signed-off-by: Adrian Fiergolski <adrian.fiergolski@xxxxxxx>
---
.../{i2c-mux-pca954x.txt => i2c-mux-pca9x4x.txt} | 5 +-
arch/arm/configs/aspeed_g4_defconfig | 2 +-
arch/arm/configs/aspeed_g5_defconfig | 2 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
arch/arm/configs/pxa_defconfig | 2 +-
arch/arm/configs/tegra_defconfig | 2 +-
arch/arm64/configs/defconfig | 2 +-
arch/powerpc/configs/85xx-hw.config | 2 +-
drivers/i2c/muxes/Kconfig | 6 +-
drivers/i2c/muxes/Makefile | 2 +-
drivers/i2c/muxes/i2c-mux-pca9541.c | 4 +-
.../muxes/{i2c-mux-pca954x.c => i2c-mux-pca9x4x.c} | 295 ++++++++++++++++-----
.../linux/platform_data/{pca954x.h => pca9x4x.h} | 15 +-
13 files changed, 246 insertions(+), 95 deletions(-)
rename Documentation/devicetree/bindings/i2c/{i2c-mux-pca954x.txt => i2c-mux-pca9x4x.txt} (91%)
rename drivers/i2c/muxes/{i2c-mux-pca954x.c => i2c-mux-pca9x4x.c} (56%)
rename include/linux/platform_data/{pca954x.h => pca9x4x.h} (80%)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca9x4x.txt
similarity index 91%
rename from Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
rename to Documentation/devicetree/bindings/i2c/i2c-mux-pca9x4x.txt
index aa097045a10e..cf9a075ca1dd 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca9x4x.txt
@@ -1,10 +1,11 @@
-* NXP PCA954x I2C bus switch
+* NXP PCA9x4x I2C bus switch
Required Properties:
- compatible: Must contain one of the following.
"nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544",
- "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548"
+ "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548",
+ "nxp,pca9846", "nxp,pca9847", "nxp,pca9848", "nxp,pca9849"
- reg: The I2C address of the device.
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index d23b9d56a88b..a461ad3cf63d 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -116,7 +116,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA9541=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA9x4x=y
Nak.
I'm not sure you should break backward compatibility. You should keep the
CONFIG_I2C_MUX_PCA954x configuration setting and the current name convention.
CONFIG_I2C_ASPEED=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index c0ad7b82086b..5e71e889aeb1 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -118,7 +118,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA9541=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA9x4x=y
CONFIG_I2C_ASPEED=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4b769f..0a9b3ec54e2f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -352,7 +352,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA9x4x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_AT91=m
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 830e817a028a..7b181af815d9 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -350,7 +350,7 @@ CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_PCA9x4x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_PXA_SLAVE=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 6678f2929356..4c6efffe5659 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -128,7 +128,7 @@ CONFIG_SERIAL_TEGRA=y
# CONFIG_HW_RANDOM is not set
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA9x4x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6356c6da34ea..9685367bd073 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -268,7 +268,7 @@ CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA9x4x=y
CONFIG_I2C_BCM2835=m
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_IMX=y
diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config
index c03d0fb16665..0772c249a287 100644
--- a/arch/powerpc/configs/85xx-hw.config
+++ b/arch/powerpc/configs/85xx-hw.config
@@ -48,7 +48,7 @@ CONFIG_HID_SUNPLUS=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
-CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PCA9x4x=y
CONFIG_I2C_MUX=y
CONFIG_I2C=y
CONFIG_IGB=y
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 0f5c8fc36625..0a35869020ea 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -63,11 +63,11 @@ config I2C_MUX_PCA9541
This driver can also be built as a module. If so, the module
will be called i2c-mux-pca9541.
-config I2C_MUX_PCA954x
- tristate "Philips PCA954x I2C Mux/switches"
+config I2C_MUX_PCA9x4x
+ tristate "Philips PCA9x4x I2C Mux/switches"
depends on GPIOLIB || COMPILE_TEST
help
- If you say yes here you get support for the Philips PCA954x
+ If you say yes here you get support for the Philips PCA9x4x
I2C mux/switch devices.
Even here you should point out that the driver supports both PCA954x and PCA984x
families... maybe you can write as follow:
If you say yes here you get support for the Philips PCA954x and PCA984x I2C
mux/switch devices.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index 6d9d865e8518..a87c9adc5671 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_I2C_MUX_GPMUX) += i2c-mux-gpmux.o
obj-$(CONFIG_I2C_MUX_LTC4306) += i2c-mux-ltc4306.o
obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
-obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
+obj-$(CONFIG_I2C_MUX_PCA9x4x) += i2c-mux-pca9x4x.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 6a39adaf433f..0eb84deef566 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -22,7 +22,7 @@
#include <linux/i2c-mux.h>
#include <linux/jiffies.h>
#include <linux/module.h>
-#include <linux/platform_data/pca954x.h>
+#include <linux/platform_data/pca9x4x.h>
#include <linux/slab.h>
/*
@@ -334,7 +334,7 @@ static int pca9541_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adap = client->adapter;
- struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct pca9x4x_platform_data *pdata = dev_get_platdata(&client->dev);
struct i2c_mux_core *muxc;
struct pca9541 *data;
int force;
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca9x4x.c
similarity index 56%
rename from drivers/i2c/muxes/i2c-mux-pca954x.c
rename to drivers/i2c/muxes/i2c-mux-pca9x4x.c
index 2ca068d8b92d..14ef7cfca751 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9x4x.c
@@ -1,14 +1,16 @@
/*
* I2C multiplexer
*
+ * Copyright (c) 2017 Adrian Fiergolski <Adrian.Fiergolski@xxxxxxx>
* Copyright (c) 2008-2009 Rodolfo Giometti <giometti@xxxxxxxx>
* Copyright (c) 2008-2009 Eurotech S.p.A. <info@xxxxxxxxxxx>
*
- * This module supports the PCA954x series of I2C multiplexer/switch chips
+ * This module supports the Pca9x4x series of I2C multiplexer/switch chips
* made by Philips Semiconductors.
* This includes the:
* PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547
* and PCA9548.
+ * PCA9846, PCA9847, PCA9848 and PCA9849
*
* These chips are all controlled via the I2C bus itself, and all have a
* single 8-bit register. The upstream "parent" bus fans out to two,
@@ -45,14 +47,20 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
-#include <linux/platform_data/pca954x.h>
+#include <linux/platform_data/pca9x4x.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#define PCA954X_MAX_NCHANS 8
+#define PCA9X4X_MAX_NCHANS 8
-#define PCA954X_IRQ_OFFSET 4
+#define PCA9X4X_IRQ_OFFSET 4
+
+//PCA984x family I2C other addresses
+#define GENERAL_CALL 0x00
+#define SOFTWARE_RESET 0x06
+#define DEVICE_ID_ADDRESS 0x7C
+#define NXP_ID 0x00
enum pca_type {
pca_9540,
@@ -63,6 +71,12 @@ enum pca_type {
pca_9546,
pca_9547,
pca_9548,
+
Why is a blank line here?
+ pca_9846,
+ pca_9847,
+ pca_9848,
+ pca_9849,
+
};
struct chip_desc {
@@ -70,12 +84,13 @@ struct chip_desc {
u8 enable; /* used for muxes only */
u8 has_irq;
enum muxtype {
- pca954x_ismux = 0,
- pca954x_isswi
+ pca9x4x_ismux = 0,
+ pca9x4x_isswi
} muxtype;
+ u16 deviceID; //used by PCA984x family only
};
-struct pca954x {
+struct pca9x4x {
const struct chip_desc *chip;
u8 last_chan; /* last register value */
@@ -87,51 +102,79 @@ struct pca954x {
raw_spinlock_t lock;
};
-/* Provide specs for the PCA954x types we know about */
+/* Provide specs for the PCA9x4x types we know about */
static const struct chip_desc chips[] = {
+ //954x family
[pca_9540] = {
.nchans = 2,
.enable = 0x4,
- .muxtype = pca954x_ismux,
+ .muxtype = pca9x4x_ismux,
},
[pca_9542] = {
.nchans = 2,
.enable = 0x4,
.has_irq = 1,
- .muxtype = pca954x_ismux,
+ .muxtype = pca9x4x_ismux,
},
[pca_9543] = {
.nchans = 2,
.has_irq = 1,
- .muxtype = pca954x_isswi,
+ .muxtype = pca9x4x_isswi,
},
[pca_9544] = {
.nchans = 4,
.enable = 0x4,
.has_irq = 1,
- .muxtype = pca954x_ismux,
+ .muxtype = pca9x4x_ismux,
},
[pca_9545] = {
.nchans = 4,
.has_irq = 1,
- .muxtype = pca954x_isswi,
+ .muxtype = pca9x4x_isswi,
},
[pca_9546] = {
.nchans = 4,
- .muxtype = pca954x_isswi,
+ .muxtype = pca9x4x_isswi,
},
[pca_9547] = {
.nchans = 8,
.enable = 0x8,
- .muxtype = pca954x_ismux,
+ .muxtype = pca9x4x_ismux,
},
[pca_9548] = {
.nchans = 8,
- .muxtype = pca954x_isswi,
+ .muxtype = pca9x4x_isswi,
+ },
+
+ //984x family
+ [pca_9846] = {
+ .nchans = 4,
+ .muxtype = pca9x4x_isswi,
+ .deviceID = 0x10B,
+ },
+
+ [pca_9847] = {
+ .nchans = 8,
+ .muxtype = pca9x4x_ismux,
+ .deviceID = 0x108,
},
+
+ [pca_9848] = {
+ .nchans = 8,
+ .muxtype = pca9x4x_isswi,
+ .deviceID = 0x10A,
+ },
+
+ [pca_9849] = {
+ .nchans = 4,
+ .muxtype = pca9x4x_ismux,
+ .deviceID = 0x109,
+ },
+
};
-static const struct i2c_device_id pca954x_id[] = {
+static const struct i2c_device_id pca9x4x_id[] = {
+ //954x family
{ "pca9540", pca_9540 },
{ "pca9542", pca_9542 },
{ "pca9543", pca_9543 },
@@ -140,12 +183,20 @@ static const struct i2c_device_id pca954x_id[] = {
{ "pca9546", pca_9546 },
{ "pca9547", pca_9547 },
{ "pca9548", pca_9548 },
+
+ //984x family
+ { "pca9846", pca_9846 },
+ { "pca9847", pca_9847 },
+ { "pca9848", pca_9848 },
+ { "pca9849", pca_9849 },
+
{ }
};
-MODULE_DEVICE_TABLE(i2c, pca954x_id);
+MODULE_DEVICE_TABLE(i2c, pca9x4x_id);
#ifdef CONFIG_OF
-static const struct of_device_id pca954x_of_match[] = {
+static const struct of_device_id pca9x4x_of_match[] = {
+ //954x family
{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
@@ -154,14 +205,22 @@ static const struct of_device_id pca954x_of_match[] = {
{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
+
+
+ //984x family
+ { .compatible = "nxp,pca9846", .data = &chips[pca_9846] },
+ { .compatible = "nxp,pca9847", .data = &chips[pca_9847] },
+ { .compatible = "nxp,pca9848", .data = &chips[pca_9848] },
+ { .compatible = "nxp,pca9849", .data = &chips[pca_9849] },
+
{}
};
-MODULE_DEVICE_TABLE(of, pca954x_of_match);
+MODULE_DEVICE_TABLE(of, pca9x4x_of_match);
#endif
/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
for this as they will try to lock adapter a second time */
-static int pca954x_reg_write(struct i2c_adapter *adap,
+static int pca9x4x_reg_write(struct i2c_adapter *adap,
struct i2c_client *client, u8 val)
{
int ret = -ENODEV;
@@ -190,32 +249,32 @@ static int pca954x_reg_write(struct i2c_adapter *adap,
return ret;
}
-static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
+static int pca9x4x_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
- struct pca954x *data = i2c_mux_priv(muxc);
+ struct pca9x4x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
const struct chip_desc *chip = data->chip;
u8 regval;
int ret = 0;
/* we make switches look like muxes, not sure how to be smarter */
- if (chip->muxtype == pca954x_ismux)
+ if (chip->muxtype == pca9x4x_ismux)
regval = chan | chip->enable;
else
regval = 1 << chan;
/* Only select the channel if its different from the last channel */
if (data->last_chan != regval) {
- ret = pca954x_reg_write(muxc->parent, client, regval);
+ ret = pca9x4x_reg_write(muxc->parent, client, regval);
data->last_chan = ret < 0 ? 0 : regval;
}
return ret;
}
-static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
+static int pca9x4x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
{
- struct pca954x *data = i2c_mux_priv(muxc);
+ struct pca9x4x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
if (!(data->deselect & (1 << chan)))
@@ -223,12 +282,12 @@ static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
/* Deselect active channel */
data->last_chan = 0;
- return pca954x_reg_write(muxc->parent, client, data->last_chan);
+ return pca9x4x_reg_write(muxc->parent, client, data->last_chan);
}
-static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
+static irqreturn_t pca9x4x_irq_handler(int irq, void *dev_id)
{
- struct pca954x *data = dev_id;
+ struct pca9x4x *data = dev_id;
unsigned int child_irq;
int ret, i, handled = 0;
@@ -237,7 +296,7 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
for (i = 0; i < data->chip->nchans; i++) {
- if (ret & BIT(PCA954X_IRQ_OFFSET + i)) {
+ if (ret & BIT(PCA9X4X_IRQ_OFFSET + i)) {
child_irq = irq_linear_revmap(data->irq, i);
handle_nested_irq(child_irq);
handled++;
@@ -246,21 +305,21 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
return handled ? IRQ_HANDLED : IRQ_NONE;
}
-static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
+static int pca9x4x_irq_set_type(struct irq_data *idata, unsigned int type)
{
if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
return -EINVAL;
return 0;
}
-static struct irq_chip pca954x_irq_chip = {
- .name = "i2c-mux-pca954x",
- .irq_set_type = pca954x_irq_set_type,
+static struct irq_chip pca9x4x_irq_chip = {
+ .name = "i2c-mux-pca9x4x",
+ .irq_set_type = pca9x4x_irq_set_type,
};
-static int pca954x_irq_setup(struct i2c_mux_core *muxc)
+static int pca9x4x_irq_setup(struct i2c_mux_core *muxc)
{
- struct pca954x *data = i2c_mux_priv(muxc);
+ struct pca9x4x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
int c, irq;
@@ -282,16 +341,16 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
return -EINVAL;
}
irq_set_chip_data(irq, data);
- irq_set_chip_and_handler(irq, &pca954x_irq_chip,
- handle_simple_irq);
+ irq_set_chip_and_handler(irq, &pca9x4x_irq_chip,
+ handle_simple_irq);
}
return 0;
}
-static void pca954x_cleanup(struct i2c_mux_core *muxc)
+static void pca9x4x_cleanup(struct i2c_mux_core *muxc)
{
- struct pca954x *data = i2c_mux_priv(muxc);
+ struct pca9x4x *data = i2c_mux_priv(muxc);
int c, irq;
if (data->irq) {
@@ -304,20 +363,92 @@ static void pca954x_cleanup(struct i2c_mux_core *muxc)
i2c_mux_del_adapters(muxc);
}
+/*
+ * Part of probe function specific for pca954x family
+ */
+inline int pca954x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id){
+
+ /* Write the mux register at addr to verify
+ * that the mux is in fact present. This also
+ * initializes the mux to disconnected state.
+ */
+ if (i2c_smbus_write_byte(client, 0) < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * Part of probe function specific for pca984x family
+ */
+inline int pca984x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id){
+
+ struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
+ union i2c_smbus_data device_id_raw;
+ u16 manufacturer_id; //12 bits
+
+ if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
+ dev_warn(&client->dev, "PCA9846 family: I2c adapter doesn't support I2C_FUNC_SMBUS_WRITE_BYTE_DATA");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ dev_warn(&client->dev, "PCA9846 family: I2c adapter doesn't support I2C_FUNC_SMBUS_READ_I2C_BLOCK");
+ return -ENODEV;
+ }
+
+ //
+ //Software reset
+ //
I'm not sure you can use "//" for comments...
+ if (i2c_smbus_xfer(client->adapter, GENERAL_CALL, client->flags,
+ I2C_SMBUS_WRITE, SOFTWARE_RESET, I2C_SMBUS_BYTE, NULL) < 0) {
+ dev_warn(&client->dev, "PCA9846 family: Sofrware reset failed\n");
+ return -ENODEV;
+ }
+
+ //
+ //Get device ID
+ //
+ device_id_raw.block[0] = 3; //read 3 bytes
+ if (i2c_smbus_xfer(client->adapter, DEVICE_ID_ADDRESS, client->flags,
+ I2C_SMBUS_READ, client->addr << 1,
+ I2C_SMBUS_I2C_BLOCK_DATA, &device_id_raw)) {
+ dev_warn(&client->dev, "PCA9846 family: Get device ID failed\n");
+ return -ENODEV;
+ }
+
+ //Device ID contains only 3 bytes
+ if (device_id_raw.block[0] != 3) {
+ dev_warn(&client->dev, "PCA9846 family: Get device ID failed\n");
+ return -ENODEV;
+ }
+
+ //Check manufacturer ID (12 bits)
+ manufacturer_id = ((u16) device_id_raw.block[1] << 4) | (device_id_raw.block[2] >> 4);
+ if (manufacturer_id != NXP_ID) {
+ dev_warn(&client->dev, "PCA9846 family: Manufacturer ID does not match NXP\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
/*
* I2C init/probing/exit functions
*/
-static int pca954x_probe(struct i2c_client *client,
+static int pca9x4x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
- struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct pca9x4x_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *of_node = client->dev.of_node;
bool idle_disconnect_dt;
struct gpio_desc *gpio;
int num, force, class;
struct i2c_mux_core *muxc;
- struct pca954x *data;
+ struct pca9x4x *data;
const struct of_device_id *match;
int ret;
@@ -325,8 +456,8 @@ static int pca954x_probe(struct i2c_client *client,
return -ENODEV;
muxc = i2c_mux_alloc(adap, &client->dev,
- PCA954X_MAX_NCHANS, sizeof(*data), 0,
- pca954x_select_chan, pca954x_deselect_mux);
+ PCA9X4X_MAX_NCHANS, sizeof(*data), 0,
+ pca9x4x_select_chan, pca9x4x_deselect_mux);
if (!muxc)
return -ENOMEM;
data = i2c_mux_priv(muxc);
@@ -339,16 +470,34 @@ static int pca954x_probe(struct i2c_client *client,
if (IS_ERR(gpio))
return PTR_ERR(gpio);
- /* Write the mux register at addr to verify
- * that the mux is in fact present. This also
- * initializes the mux to disconnected state.
- */
- if (i2c_smbus_write_byte(client, 0) < 0) {
+ switch (id->driver_data) {
+ case pca_9540:
+ case pca_9542:
+ case pca_9543:
+ case pca_9544:
+ case pca_9545:
+ case pca_9546:
+ case pca_9547:
+ case pca_9548:
+ ret = pca954x_probe(client, id);
+ break;
+ case pca_9846:
+ case pca_9847:
+ case pca_9848:
+ case pca_9849:
+ ret = pca984x_probe(client, id);
+ break;
+ default: //unknown device
+ ret = -ENODEV;
+ break;
+ }
+
+ if (ret < 0) {
dev_warn(&client->dev, "probe failed\n");
return -ENODEV;
}
- match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
+ match = of_match_device(of_match_ptr(pca9x4x_of_match), &client->dev);
if (match)
data->chip = of_device_get_match_data(&client->dev);
else
@@ -359,7 +508,7 @@ static int pca954x_probe(struct i2c_client *client,
idle_disconnect_dt = of_node &&
of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
- ret = pca954x_irq_setup(muxc);
+ ret = pca9x4x_irq_setup(muxc);
if (ret)
goto fail_cleanup;
@@ -389,60 +538,60 @@ static int pca954x_probe(struct i2c_client *client,
if (data->irq) {
ret = devm_request_threaded_irq(&client->dev, data->client->irq,
- NULL, pca954x_irq_handler,
+ NULL, pca9x4x_irq_handler,
IRQF_ONESHOT | IRQF_SHARED,
- "pca954x", data);
+ "pca9x4x", data);
if (ret)
goto fail_cleanup;
}
dev_info(&client->dev,
"registered %d multiplexed busses for I2C %s %s\n",
- num, data->chip->muxtype == pca954x_ismux
- ? "mux" : "switch", client->name);
+ num, data->chip->muxtype == pca9x4x_ismux
+ ? "mux" : "switch", client->name);
return 0;
fail_cleanup:
- pca954x_cleanup(muxc);
+ pca9x4x_cleanup(muxc);
return ret;
}
-static int pca954x_remove(struct i2c_client *client)
+static int pca9x4x_remove(struct i2c_client *client)
{
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
- pca954x_cleanup(muxc);
+ pca9x4x_cleanup(muxc);
return 0;
}
#ifdef CONFIG_PM_SLEEP
-static int pca954x_resume(struct device *dev)
+static int pca9x4x_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
- struct pca954x *data = i2c_mux_priv(muxc);
+ struct pca9x4x *data = i2c_mux_priv(muxc);
data->last_chan = 0;
return i2c_smbus_write_byte(client, 0);
}
#endif
-static SIMPLE_DEV_PM_OPS(pca954x_pm, NULL, pca954x_resume);
+static SIMPLE_DEV_PM_OPS(pca9x4x_pm, NULL, pca9x4x_resume);
-static struct i2c_driver pca954x_driver = {
+static struct i2c_driver pca9x4x_driver = {
.driver = {
- .name = "pca954x",
- .pm = &pca954x_pm,
- .of_match_table = of_match_ptr(pca954x_of_match),
+ .name = "pca9x4x",
+ .pm = &pca9x4x_pm,
+ .of_match_table = of_match_ptr(pca9x4x_of_match),
},
- .probe = pca954x_probe,
- .remove = pca954x_remove,
- .id_table = pca954x_id,
+ .probe = pca9x4x_probe,
+ .remove = pca9x4x_remove,
+ .id_table = pca9x4x_id,
};
-module_i2c_driver(pca954x_driver);
+module_i2c_driver(pca9x4x_driver);
-MODULE_AUTHOR("Rodolfo Giometti <giometti@xxxxxxxx>");
-MODULE_DESCRIPTION("PCA954x I2C mux/switch driver");
+MODULE_AUTHOR("Rodolfo Giometti <giometti@xxxxxxxx>, Adrian Fiergolski <Adrian.Fiergolski@xxxxxxx>");
+MODULE_DESCRIPTION("PCA9x4x I2C mux/switch driver");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/pca954x.h b/include/linux/platform_data/pca9x4x.h
similarity index 80%
rename from include/linux/platform_data/pca954x.h
rename to include/linux/platform_data/pca9x4x.h
index 1712677d5904..a33c5afbfd7f 100644
--- a/include/linux/platform_data/pca954x.h
+++ b/include/linux/platform_data/pca9x4x.h
@@ -2,6 +2,7 @@
*
* pca954x.h - I2C multiplexer/switch support
*
+ * Copyright (c) 2017 Adrian Fiergolski <Adrian.Fiergolski@xxxxxxx>
* Copyright (c) 2008-2009 Rodolfo Giometti <giometti@xxxxxxxx>
* Copyright (c) 2008-2009 Eurotech S.p.A. <info@xxxxxxxxxxx>
* Michael Lawnick <michael.lawnick.ext@xxxxxxx>
@@ -22,10 +23,10 @@
*/
-#ifndef _LINUX_I2C_PCA954X_H
-#define _LINUX_I2C_PCA954X_H
+#ifndef _LINUX_I2C_PCA9X4X_H
+#define _LINUX_I2C_PCA9X4X_H
-/* Platform data for the PCA954x I2C multiplexers */
+/* Platform data for the PCA9x4x I2C multiplexers */
/* Per channel initialisation data:
* @adap_id: bus number for the adapter. 0 = don't care
@@ -33,16 +34,16 @@
* of this channel after transaction.
*
*/
-struct pca954x_platform_mode {
+struct pca9x4x_platform_mode {
int adap_id;
unsigned int deselect_on_exit:1;
unsigned int class;
};
/* Per mux/switch data, used with i2c_register_board_info */
-struct pca954x_platform_data {
- struct pca954x_platform_mode *modes;
+struct pca9x4x_platform_data {
+ struct pca9x4x_platform_mode *modes;
int num_modes;
};
-#endif /* _LINUX_I2C_PCA954X_H */
+#endif /* _LINUX_I2C_PCA9X4X_H */
--
HCE Engineering e-mail: giometti@xxxxxxxxxxxxxxxxxx
GNU/Linux Solutions giometti@xxxxxxxxxxxx
Linux Device Driver giometti@xxxxxxxx
Embedded Systems phone: +39 349 2432127
UNIX programming skype: rodolfo.giometti
Cosino Project - the quick prototyping embedded system - www.cosino.it
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it
