Remove the old and now unused read functions. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- v2: - rebased v3: - rebased --- drivers/misc/eeprom/at24.c | 185 --------------------------------------------- 1 file changed, 185 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 589e6d855..fa1dfd9c0 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -63,9 +63,6 @@ struct at24_client { struct at24_data { struct at24_platform_data chip; - int use_smbus; - - ssize_t (*read_func)(struct at24_data *, char *, unsigned int, size_t); /* * Lock protects against activities from other Linux tasks, @@ -279,39 +276,6 @@ static struct at24_client *at24_translate_offset(struct at24_data *at24, return &at24->client[i]; } -static ssize_t at24_eeprom_read_smbus(struct at24_data *at24, char *buf, - unsigned int offset, size_t count) -{ - unsigned long timeout, read_time; - struct at24_client *at24_client; - struct i2c_client *client; - int status; - - at24_client = at24_translate_offset(at24, &offset); - client = at24_client->client; - - if (count > io_limit) - count = io_limit; - - /* Smaller eeproms can work given some SMBus extension calls */ - if (count > I2C_SMBUS_BLOCK_MAX) - count = I2C_SMBUS_BLOCK_MAX; - - loop_until_timeout(timeout, read_time) { - status = i2c_smbus_read_i2c_block_data_or_emulated(client, - offset, - count, buf); - - dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", - count, offset, status, jiffies); - - if (status == count) - return count; - } - - return -ETIMEDOUT; -} - static void at24_adjust_read_offset(struct at24_data *at24, unsigned int *offset) { @@ -363,145 +327,6 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf, return -ETIMEDOUT; } -static ssize_t at24_eeprom_read_i2c(struct at24_data *at24, char *buf, - unsigned int offset, size_t count) -{ - unsigned long timeout, read_time; - struct at24_client *at24_client; - struct i2c_client *client; - struct i2c_msg msg[2]; - int status, i; - u8 msgbuf[2]; - - memset(msg, 0, sizeof(msg)); - at24_client = at24_translate_offset(at24, &offset); - client = at24_client->client; - - if (count > io_limit) - count = io_limit; - - /* - * When we have a better choice than SMBus calls, use a combined I2C - * message. Write address; then read up to io_limit data bytes. Note - * that read page rollover helps us here (unlike writes). msgbuf is - * u8 and will cast to our needs. - */ - i = 0; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msgbuf[i++] = offset >> 8; - msgbuf[i++] = offset; - - msg[0].addr = client->addr; - msg[0].buf = msgbuf; - msg[0].len = i; - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; - - loop_until_timeout(timeout, read_time) { - status = i2c_transfer(client->adapter, msg, 2); - if (status == 2) - status = count; - - dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", - count, offset, status, jiffies); - - if (status == count) - return count; - } - - return -ETIMEDOUT; -} - -static ssize_t at24_eeprom_read_serial(struct at24_data *at24, char *buf, - unsigned int offset, size_t count) -{ - unsigned long timeout, read_time; - struct at24_client *at24_client; - struct i2c_client *client; - struct i2c_msg msg[2]; - u8 addrbuf[2]; - int status; - - at24_client = at24_translate_offset(at24, &offset); - client = at24_client->client; - - memset(msg, 0, sizeof(msg)); - msg[0].addr = client->addr; - msg[0].buf = addrbuf; - - /* - * The address pointer of the device is shared between the regular - * EEPROM array and the serial number block. The dummy write (part of - * the sequential read protocol) ensures the address pointer is reset - * to the desired position. - */ - if (at24->chip.flags & AT24_FLAG_ADDR16) { - /* - * For 16 bit address pointers, the word address must contain - * a '10' sequence in bits 11 and 10 regardless of the - * intended position of the address pointer. - */ - addrbuf[0] = 0x08; - addrbuf[1] = offset; - msg[0].len = 2; - } else { - /* - * Otherwise the word address must begin with a '10' sequence, - * regardless of the intended address. - */ - addrbuf[0] = 0x80 + offset; - msg[0].len = 1; - } - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; - - loop_until_timeout(timeout, read_time) { - status = i2c_transfer(client->adapter, msg, 2); - if (status == 2) - return count; - } - - return -ETIMEDOUT; -} - -static ssize_t at24_eeprom_read_mac(struct at24_data *at24, char *buf, - unsigned int offset, size_t count) -{ - unsigned long timeout, read_time; - struct at24_client *at24_client; - struct i2c_client *client; - struct i2c_msg msg[2]; - u8 addrbuf[2]; - int status; - - at24_client = at24_translate_offset(at24, &offset); - client = at24_client->client; - - memset(msg, 0, sizeof(msg)); - msg[0].addr = client->addr; - msg[0].buf = addrbuf; - addrbuf[0] = 0x90 + offset; - msg[0].len = 1; - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; - - loop_until_timeout(timeout, read_time) { - status = i2c_transfer(client->adapter, msg, 2); - if (status == 2) - return count; - } - - return -ETIMEDOUT; -} - /* * Note that if the hardware write-protect pin is pulled high, the whole * chip is normally write protected. But there are plenty of product @@ -785,7 +610,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) return -ENOMEM; mutex_init(&at24->lock); - at24->use_smbus = use_smbus; at24->chip = chip; at24->num_addresses = num_addresses; @@ -800,15 +624,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EINVAL; } - if (chip.flags & AT24_FLAG_SERIAL) { - at24->read_func = at24_eeprom_read_serial; - } else if (chip.flags & AT24_FLAG_MAC) { - at24->read_func = at24_eeprom_read_mac; - } else { - at24->read_func = at24->use_smbus ? at24_eeprom_read_smbus - : at24_eeprom_read_i2c; - } - writable = !(chip.flags & AT24_FLAG_READONLY); if (writable) { if (!use_smbus || use_smbus_write) { -- 2.15.0