[PATCH 5/6] i2c: send STOP after successful bus recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If we managed to get a client release SDA again, send a STOP afterwards
to make sure we have a consistent state on the bus again.

Cc: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Cc: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/i2c-core-base.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index dae7f4a783dbe4..29d6606d653229 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -200,6 +200,18 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
 	if (bri->get_sda && !bri->get_sda(adap))
 		ret = -EBUSY;
 
+	/* If all went well, send STOP for a sane bus state. */
+	if (ret == 0 && bri->set_sda) {
+		bri->set_scl(adap, 0);
+		ndelay(RECOVERY_NDELAY / 2);
+		bri->set_sda(adap, 0);
+		ndelay(RECOVERY_NDELAY / 2);
+		bri->set_scl(adap, 1);
+		ndelay(RECOVERY_NDELAY / 2);
+		bri->set_sda(adap, 1);
+		ndelay(RECOVERY_NDELAY / 2);
+	}
+
 	if (bri->unprepare_recovery)
 		bri->unprepare_recovery(adap);
 
-- 
2.11.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux