Re: [PATCH] i2c: sh_mobile: send STOP according to datasheet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wolfram,

On 2017-11-10 12:52:10 +0100, Wolfram Sang wrote:
> We initiate STOP (or REP_START) on the second last WAIT interrupt
> currently. This works fine but is not according to the datasheet which
> says to do it on the last WAIT interrupt. This also simplifies the code
> quite a lot, so let's do it.

I like this change and I checked the flow diagrams in chapter '56.4
Operation' of the Gen2 datasheet rev 2.0 and chapter '58.3 Operation' of 
the Gen3 datasheet rev 0.80, and it makes sens for both.

> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

For Gen2 and Gen3:

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

> ---
> 
> Jacopo: another one to test, pretty please.
> 
>  drivers/i2c/busses/i2c-sh_mobile.c | 29 ++++++-----------------------
>  1 file changed, 6 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
> index 40a66d466c3c49..c904be631db302 100644
> --- a/drivers/i2c/busses/i2c-sh_mobile.c
> +++ b/drivers/i2c/busses/i2c-sh_mobile.c
> @@ -40,21 +40,21 @@
>  /* BUS:     S     A8     ACK   P(*)                                         */
>  /* IRQ:       DTE   WAIT                                                    */
>  /* ICIC:                                                                    */
> -/* ICCR: 0x94 0x90                                                          */
> +/* ICCR: 0x94       0x90                                                    */
>  /* ICDR:      A8                                                            */
>  /*                                                                          */
>  /* 1 byte transmit                                                          */
>  /* BUS:     S     A8     ACK   D8(1)   ACK   P(*)                           */
>  /* IRQ:       DTE   WAIT         WAIT                                       */
>  /* ICIC:      -DTE                                                          */
> -/* ICCR: 0x94       0x90                                                    */
> +/* ICCR: 0x94                    0x90                                       */
>  /* ICDR:      A8    D8(1)                                                   */
>  /*                                                                          */
>  /* 2 byte transmit                                                          */
>  /* BUS:     S     A8     ACK   D8(1)   ACK   D8(2)   ACK   P(*)             */
>  /* IRQ:       DTE   WAIT         WAIT          WAIT                         */
>  /* ICIC:      -DTE                                                          */
> -/* ICCR: 0x94                    0x90                                       */
> +/* ICCR: 0x94                                  0x90                         */
>  /* ICDR:      A8    D8(1)        D8(2)                                      */
>  /*                                                                          */
>  /* 3 bytes or more, +---------+ gets repeated                               */
> @@ -113,7 +113,6 @@ enum sh_mobile_i2c_op {
>  	OP_TX_FIRST,
>  	OP_TX,
>  	OP_TX_STOP,
> -	OP_TX_STOP_DATA,
>  	OP_TX_TO_RX,
>  	OP_RX,
>  	OP_RX_STOP,
> @@ -319,10 +318,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
>  	case OP_TX: /* write data */
>  		iic_wr(pd, ICDR, data);
>  		break;
> -	case OP_TX_STOP_DATA: /* write data and issue a stop afterwards */
> -		iic_wr(pd, ICDR, data);
> -		/* fallthrough */
> -	case OP_TX_STOP: /* issue a stop */
> +	case OP_TX_STOP: /* issue a stop (or rep_start) */
>  		iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS
>  					       : ICCR_ICE | ICCR_TRS | ICCR_BBSY);
>  		break;
> @@ -356,11 +352,6 @@ static bool sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
>  	return pd->pos == -1;
>  }
>  
> -static bool sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
> -{
> -	return pd->pos == pd->msg->len - 1;
> -}
> -
>  static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
>  				   unsigned char *buf)
>  {
> @@ -378,20 +369,12 @@ static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
>  	unsigned char data;
>  
>  	if (pd->pos == pd->msg->len) {
> -		/* Send stop if we haven't yet (DMA case) */
> -		if (pd->send_stop && pd->stop_after_dma)
> -			i2c_op(pd, OP_TX_STOP, 0);
> +		i2c_op(pd, OP_TX_STOP, 0);
>  		return 1;
>  	}
>  
>  	sh_mobile_i2c_get_data(pd, &data);
> -
> -	if (sh_mobile_i2c_is_last_byte(pd))
> -		i2c_op(pd, OP_TX_STOP_DATA, data);
> -	else if (sh_mobile_i2c_is_first_byte(pd))
> -		i2c_op(pd, OP_TX_FIRST, data);
> -	else
> -		i2c_op(pd, OP_TX, data);
> +	i2c_op(pd, sh_mobile_i2c_is_first_byte(pd) ? OP_TX_FIRST : OP_TX, data);
>  
>  	pd->pos++;
>  	return 0;
> -- 
> 2.11.0
> 

-- 
Regards,
Niklas Söderlund



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux