[PATCH 0/6] R-Car D3 (r8a77995) I2C integration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

This adds I2C controllers to the D3 device tree and enables I2C busses 0
and 1 on the Draak board. (I2C2 is not connected on that board.)

Includes missing pins, DMA support and the Draak's serial EEPROM.

CU
Uli


Ulrich Hecht (6):
  pinctrl: sh-pfc: r8a77995: add missing pins SCL0 and SDA0 to pinmux
    data
  i2c: rcar: enable for R-Car D3 (r8a77995)
  arm64: renesas: r8a77995: add I2C support
  arm64: renesas: draak: enable I2C controller 0 and EEPROM
  arm64: renesas: draak: enable I2C controller 1
  i2c: rcar: document R8A77970 bindings

 Documentation/devicetree/bindings/i2c/i2c-rcar.txt |  1 +
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts     | 28 ++++++++++
 arch/arm64/boot/dts/renesas/r8a77995.dtsi          | 64 ++++++++++++++++++++++
 drivers/i2c/busses/i2c-rcar.c                      |  1 +
 drivers/pinctrl/sh-pfc/pfc-r8a77995.c              |  2 +
 5 files changed, 96 insertions(+)

-- 
2.7.4




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux