i2c-designware: sound and s2ram broken on Broadwell-U system since commit ca382f5b38f367b6 (add i2c gpio recovery option)

[Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>]

Dear all,

on v4.16-rc1+, sound does not work any more on my Dell XPS 13;
suspend-to-RAM hangs as well. I have bisected this problem down to
commit ca382f5b38f3; reverting this on top of Linus' latest (1e3510b2b053)
fixes these issues. A bit info on the system (from a working kernel):

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)

ls -l /sys/devices/pci0000:00/INT3432:00/i2c-0/i2c-INT343A:00 
total 0
lrwxrwxrwx 1 root root    0 Feb 17 14:20 driver -> ../../../../../bus/i2c/drivers/rt286
lrwxrwxrwx 1 root root    0 Feb 17 14:20 firmware_node -> ../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3432:00/INT343A:00
-r--r--r-- 1 root root 4096 Feb 17 14:20 modalias
-r--r--r-- 1 root root 4096 Feb 17 14:20 name
drwxr-xr-x 2 root root    0 Feb 17 14:19 power
lrwxrwxrwx 1 root root    0 Feb 17 14:10 subsystem -> ../../../../../bus/i2c
-rw-r--r-- 1 root root 4096 Feb 17 14:20 uevent

>From a working dmesg:

	sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels
	haswell-pcm-audio haswell-pcm-audio: Direct firmware load for intel/IntcPP01.bin failed with error -2
	haswell-pcm-audio haswell-pcm-audio: fw image intel/IntcPP01.bin not available(-2)
	haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
	broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> System Pin mapping ok
	broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload0 Pin mapping ok
	broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload1 Pin mapping ok
	broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Loopback Pin mapping ok
	broadwell-audio broadwell-audio: rt286-aif1 <-> snd-soc-dummy-dai mapping ok
	input: broadwell-rt286 Headset as /devices/pci0000:00/INT3438:00/broadwell-audio/sound/card1/input15

And a few snippets from a broken kernel dmesg:

	i2c_designware: probe of INT3432:00 failed with error -38
	i2c_designware: probe of INT3433:00 failed with error -38
	broadwell-audio broadwell-audio: ASoC: CPU DAI System Pin not registered
	broadwell-audio broadwell-audio: ASoC: CODEC DAI rt286-aif1 not registered
	
Ideas on how to fix this properly?

Thanks,
	Dominik