On Fri, Jul 13, 2012 at 3:40 AM, Amaury Decrême <amaury.decreme@xxxxxxxxx> wrote: > This patch is a driver for SiS964 I2C bus. > > It was forked from i2c-sis630 and modified with SiS datasheets. > > Tested with kmemleak. > > Signed-off-by: Amaury Decrême <amaury.decreme@xxxxxxxxx> > --- > Documentation/i2c/busses/i2c-sis964 | 34 ++ > MAINTAINERS | 16 + > drivers/i2c/busses/Kconfig | 12 +- > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-sis964.c | 575 +++++++++++++++++++++++++++++++++++ > include/linux/pci_ids.h | 1 + > 6 files changed, 638 insertions(+), 1 deletions(-) > create mode 100644 Documentation/i2c/busses/i2c-sis964 > create mode 100644 drivers/i2c/busses/i2c-sis964.c > > diff --git a/Documentation/i2c/busses/i2c-sis964 b/Documentation/i2c/busses/i2c-sis964 > new file mode 100644 > index 0000000..a831f1a > --- /dev/null > +++ b/Documentation/i2c/busses/i2c-sis964 > @@ -0,0 +1,34 @@ > +Kernel driver i2c-sis964 > + > +Supported adapters: > + * Silicon Integrated Systems Corp (SiS) > + 964 chipset (Datasheet by SiS) > + * Possible other SiS chipsets with the same registers and clocks > + > +Author: Amaury Decrême <amaury.decreme@xxxxxxxxx> > + > +Module Parameters > +----------------- > + > +* force = [1|0] Forcibly enable the SIS964. DANGEROUS! > + This can be interesting for chipsets not named > + above to check if it works for you chipset, > + but DANGEROUS! > + > +* low_clock = [1|0] 1 = Set Host Master Clock to 28KHz (defaut 56Khz) > + > +Description > +----------- > + > +This SMBus driver is known to work on motherboards with the SiS964 chipset. > + > +If you see something like this: > + > +00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] > + > +in your 'lspci' output , then this driver is for your chipset. > + > +Thank You > +--------- > +Alexander Malysh <amalysh@xxxxxx> > +- Who has written i2c-sis630, from which i2c-sis964 is forked > diff --git a/MAINTAINERS b/MAINTAINERS > index eb22272..4a11805 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6179,6 +6179,22 @@ S: Maintained > F: Documentation/i2c/busses/i2c-sis96x > F: drivers/i2c/busses/i2c-sis96x.c > > +SIS 964 I2C/SMBUS DRIVER > +M: "Amaury Decrême" <amaury.decreme@xxxxxxxxx> > +L: linux-i2c@xxxxxxxxxxxxxxx > +S: Maintained > +F: Documentation/i2c/busses/i2c-sis96i4 > +F: drivers/i2c/busses/i2c-sis964.c > + > +SIS FRAMEBUFFER DRIVER > +M: Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx> > +W: http://www.winischhofer.net/linuxsisvga.shtml > +S: Maintained > +F: Documentation/fb/sisfb.txt > +F: drivers/video/sis/ > +F: include/video/sisfb.h > + > +SIS USB2VGA DRIVER > SIS FRAMEBUFFER DRIVER > M: Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx> > W: http://www.winischhofer.net/linuxsisvga.shtml > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 7244c8b..8dc9f90 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -189,8 +189,18 @@ config I2C_SIS630 > This driver can also be built as a module. If so, the module > will be called i2c-sis630. > > +config I2C_SIS964 > + tristate "SiS 964" > + depends on PCI && EXPERIMENTAL > + help > + If you say yes to this option, support will be included for the SiS > + 964 SMBus (a subset of I2C) interfaces. > + > + This driver can also be built as a module. If so, the module > + will be called i2c-sis964. > + > config I2C_SIS96X > - tristate "SiS 96x" > + tristate "SiS 96x (but SiS964)" > depends on PCI > help > If you say yes to this option, support will be included for the SiS > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index ce3c2be..b985bc8 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o > obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o > obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o > obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o > +obj-$(CONFIG_I2C_SIS964) += i2c-sis964.o > obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o > obj-$(CONFIG_I2C_VIA) += i2c-via.o > obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o > diff --git a/drivers/i2c/busses/i2c-sis964.c b/drivers/i2c/busses/i2c-sis964.c > new file mode 100644 > index 0000000..9f4ed14 > --- /dev/null > +++ b/drivers/i2c/busses/i2c-sis964.c > @@ -0,0 +1,575 @@ > +/* > + Copyright (c) 2012 Amaury Decrême <amaury.decreme@xxxxxxxxx> > + > + This program is free software; you can redistribute it and/or modify > + it under the terms of the GNU General Public License as published by > + the Free Software Foundation; either version 2 of the License, or > + (at your option) any later version. > + > + This program is distributed in the hope that it will be useful, > + but WITHOUT ANY WARRANTY; without even the implied warranty of > + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + GNU General Public License for more details. > + > + You should have received a copy of the GNU General Public License > + along with this program; if not, write to the Free Software > + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > +*/ > + > +/* > + Changes: > + 11.08.2011 > + Fork of original i2c-sis630 - Alexander Malysh <amalysh@xxxxxx> > + Adapted for SiS964 with datasheets > + - Amaury Decrême <amaury.decreme@xxxxxxxxx> > +*/ > + > +/* > + Supports: > + SIS 964 > + > + Note: we assume there can only be one device, with one SMBus interface. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/delay.h> > +#include <linux/pci.h> > +#include <linux/ioport.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/acpi.h> > +#include <linux/io.h> > + > +/* SIS964 SMBus registers */ > +#define SMB_STS 0xE0 /* status */ > +#define SMB_EN 0xE1 /* status enable */ > +#define SMB_CNT 0xE2 /* Control */ > +#define SMBHOST_CNT 0xE3 /* Host Control */ > +#define SMB_ADDR 0xE4 /* Address */ > +#define SMB_CMD 0xE5 /* Command */ > +#define SMB_PERRCHK 0xE6 /* Packet Error Check */ > +#define SMB_COUNT 0xE7 /* Byte Count */ > +#define SMB_BYTE 0xE8 /* ~0x8F data byte field */ > +#define SMBDEV_ADDR 0xF0 /* Device Address */ > +#define SMB_DB0 0xF1 /* Device byte0 */ > +#define SMB_DB1 0xF2 /* Device byte1 */ > +#define SMB_SAA 0xF3 /* Host slave alias address */ > +#define SMB_PCOUNT 0xF4 /* processed byte count */ > + > + > +/* SMB_STS register */ > +#define SMBALT_STS 0x80 /* Slave alert */ > +#define BYTE_DONE_STS 0x10 /* Byte Done Status / Block Array */ > +#define SMBMAS_STS 0x08 /* Host Master */ > +#define SMBCOL_STS 0x04 /* Collision */ > +#define SMBERR_STS 0x02 /* Device error */ > + > +/* SMB_CNT register */ > +#define SMBCLK_SEL 0x20 /* Host master clock selection */ > +#define SMB_PROBE 0x02 /* Bus Probe */ > +#define SMB_HOSTBUSY 0x01 /* Host Busy */ > + > +/* SMBHOST_CNT register */ > +#define SMB_KILL 0x20 /* Kill */ > +#define SMB_START 0x10 /* Start */ > +#define SMB_PTL 0x07 /* Command Protocol */ > + > + > +/* SMB_ADDR register */ > +#define SMB_ADDRESS 0xFE /* Adress */ > +#define SMB_RW 0x01 /* Read/Write */ > + > + > +/* SMB_BYTE register */ > +#define SMB_BYTE0 0xFF /* Byte 0 */ > +#define SMB_BYTE1 0xFF00 /* Byte 1 */ > + > +/* register count for request_region */ > +#define SIS964_SMB_IOREGION 21 > + > +/* PCI address constants */ > +/* acpi base address register */ > +#define SIS964_ACPI_BASE_REG 0x74 > +/* bios control register */ > +#define SIS964_BIOS_CTL_REG 0x40 > + > +/* Other settings */ > +#define MAX_TIMEOUT 500 > + > +/* SIS964 constants */ > +#define SIS964_QUICK 0x00 > +#define SIS964_BYTE 0x01 > +#define SIS964_BYTE_DATA 0x02 > +#define SIS964_WORD_DATA 0x03 > +#define SIS964_PCALL 0x04 > +#define SIS964_BLOCK_DATA 0x05 > + > +static struct pci_driver sis964_driver; > + > +/* insmod parameters */ > +static bool low_clock; > +static bool force; > +module_param(low_clock, bool, 0); > +MODULE_PARM_DESC(low_clock, "Set Host Master Clock to 28KHz (default 56KHz)."); > +module_param(force, bool, 0); > +MODULE_PARM_DESC(force, "Forcibly enable the SIS964. DANGEROUS!"); > + > +/* acpi base address */ > +static unsigned short acpi_base; > + > +/* supported chips */ > +static int supported[] = { > + PCI_DEVICE_ID_SI_964, > + 0 /* terminates the list */ > +}; > + > +static inline u8 sis964_read(u8 reg) > +{ > + return inb(acpi_base + reg); > +} > + > +static inline void sis964_write(u8 reg, u8 data) > +{ > + outb(data, acpi_base + reg); > +} > + > +static int sis964_transaction_start(struct i2c_adapter *adap, > + int ptl, u8 *oldclock) > +{ > + int tmp = 0; > + > + /* Clear status register */ > + sis964_write(SMB_STS, 0xFF); > + > + /* Make sure the SMBus host is ready to start transmitting. */ > + tmp = sis964_read(SMB_CNT); > + if (tmp & (SMB_PROBE | SMB_HOSTBUSY)) { > + dev_dbg(&adap->dev, > + "Bus busy (status 0x%02x). Killing transaction.\n", > + tmp); > + > + sis964_write(SMBHOST_CNT, SMB_KILL); > + > + return -EBUSY; > + } > + > + /* Set Host Master Clock to 28KHz if requested */ > + if (low_clock) { > + *oldclock = sis964_read(SMB_CNT); > + sis964_write(SMB_CNT, SMBCLK_SEL); > + } > + > + /* start the transaction by setting bit start and protocol */ > + sis964_write(SMBHOST_CNT, SMB_START | (ptl & SMB_PTL)); > + > + return 0; > +} > + > +static int sis964_transaction_wait(struct i2c_adapter *adap, int ptl) > +{ > + int tmp = 0, timeout = 0; > + > + /* Wait 30us, valid for 28Khz and 56Khz */ > + udelay(30); > + > + tmp = sis964_read(SMB_STS); > + if (!(tmp & SMB_PROBE) && (tmp & SMB_HOSTBUSY)) { > + dev_dbg(&adap->dev, > + "Host busy (status 0x%02x). Restarting transaction.\n", > + tmp); > + sis964_write(SMBHOST_CNT, SMB_KILL); > + return -EAGAIN; > + } > + > + while (!(ptl == SIS964_BLOCK_DATA && (tmp & BYTE_DONE_STS)) > + && !(tmp & (SMBMAS_STS | SMBCOL_STS | SMBERR_STS)) > + && (timeout++ < MAX_TIMEOUT)) { > + > + /* Datasheets: wait 4ms max at 28Khz and > + * 2ms max at 56Khz for 8 bytes */ > + if (low_clock) > + udelay(4000); > + else > + udelay(2000); > + tmp = sis964_read(SMB_STS); > + } > + > + /* If the SMBus is still busy, we give up */ > + if (timeout > MAX_TIMEOUT) { > + dev_dbg(&adap->dev, > + "Bus Timeout (status 0x%02x)!\n", tmp); > + return -ETIMEDOUT; > + } > + > + if (tmp & SMBERR_STS) { > + dev_dbg(&adap->dev, > + "Failed bus transaction (status 0x%02x)!\n", tmp); > + return -ENXIO; > + } > + > + if (tmp & SMBCOL_STS) { > + dev_err(&adap->dev, > + "Bus collision (status 0x%02x)!\n", tmp); > + sis964_write(SMB_STS, tmp & ~SMBCOL_STS); > + return -EAGAIN; > + } > + > + return 0; > +} > + > +static void sis964_transaction_end(u8 oldclock) > +{ > + /* clear all status "sticky" bits */ > + sis964_write(SMB_STS, 0xFF); > + > + /* restore old Host Master Clock if low_clock is set */ > + if (low_clock) > + sis964_write(SMB_CNT, oldclock & SMBCLK_SEL); > +} > + > +static int sis964_transaction(struct i2c_adapter *adap, int ptl) > +{ > + int tmp = 0, timeout = 0; > + u8 oldclock = 0; > + > + do { > + tmp = sis964_transaction_start(adap, ptl, &oldclock); > + if (tmp) > + return tmp; > + > + tmp = sis964_transaction_wait(adap, ptl); > + sis964_transaction_end(oldclock); > + } while (tmp == -EAGAIN && timeout++ < MAX_TIMEOUT); > + > + if (timeout > MAX_TIMEOUT) { > + dev_dbg(&adap->dev, "Bus timeout !\n"); > + return -ETIMEDOUT; > + } > + > + return 0; > +} > + > +static int sis964_block_data_read(struct i2c_adapter *adap, > + union i2c_smbus_data *data) > +{ > + int i, len = 0, tmp = 0; > + u8 oldclock = 0; > + > + data->block[0] = len = 0; > + > + tmp = sis964_transaction_start(adap, SIS964_BLOCK_DATA, &oldclock); > + if (tmp) > + return tmp; > + > + do { > + tmp = sis964_transaction_wait(adap, SIS964_BLOCK_DATA); > + if (tmp) { > + dev_dbg(&adap->dev, "Transaction wait failed\n"); > + break; > + } > + > + /* if this first transaction then read byte count */ > + if (len == 0) > + data->block[0] = sis964_read(SMB_COUNT); > + > + if (data->block[0] > 32) > + data->block[0] = 32; > + > + dev_dbg(&adap->dev, "Block data read len=0x%x\n", > + data->block[0]); > + > + for (i = 0; i < 8 && len < data->block[0]; i++, len++) { > + dev_dbg(&adap->dev, "Read i=%d len=%d\n", i, len); > + data->block[len+1] = sis964_read(SMB_BYTE+i); > + } > + > + /* clear BYTE_DONE_STS */ > + sis964_write(SMB_STS, BYTE_DONE_STS); > + } while (len < data->block[0]); > + > + sis964_transaction_end(oldclock); > + > + return 0; > +} > + > + > +static int sis964_block_data_write(struct i2c_adapter *adap, > + union i2c_smbus_data *data) > +{ > + > + int i, len = 0, tmp = 0; > + u8 oldclock = 0; > + > + len = data->block[0]; > + if (len < 0) > + len = 0; > + else if (len > 32) > + len = 32; > + > + sis964_write(SMB_COUNT, len); > + > + for (i = 1; i <= len; i++) { > + dev_dbg(&adap->dev, "Set data 0x%02x\n", data->block[i]); > + > + /* set data */ > + sis964_write(SMB_BYTE+(i-1)%8, data->block[i]); > + if (i == 8 || (len < 8 && i == len)) { > + > + /* first transaction */ > + tmp = sis964_transaction_start(adap, SIS964_BLOCK_DATA, > + &oldclock); > + if (tmp) > + return tmp; > + > + } else if ((i-1)%8 == 7 || i == len) { > + if (i > 8) { > + dev_dbg(&adap->dev, > + "Clear smbary_sts len=%d i=%d\n", len, i); > + > + /* > + If this is not first transaction, > + we must clear sticky bit. > + clear BYTE_DONE-STS > + */ > + sis964_write(SMB_STS, BYTE_DONE_STS); > + } > + tmp = sis964_transaction_wait(adap, > + SIS964_BLOCK_DATA); > + if (tmp) { > + dev_dbg(&adap->dev, > + "Transaction wait failed\n"); > + break; > + } > + } > + } > + > + sis964_transaction_end(oldclock); > + > + return 0; > +} > + > +static int sis964_block_data(struct i2c_adapter *adap, > + union i2c_smbus_data *data, int read_write) > +{ > + if (read_write == I2C_SMBUS_WRITE) > + return sis964_block_data_write(adap, data); > + else > + return sis964_block_data_read(adap, data); > +} > + > +/* Return negative errno on error. */ > +static s32 sis964_access(struct i2c_adapter *adap, u16 addr, > + unsigned short flags, char read_write, > + u8 command, int ptl, union i2c_smbus_data *data) > +{ > + int tmp = 0; > + > + switch (ptl) { > + case I2C_SMBUS_QUICK: > + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) | > + (read_write & SMB_RW)); > + ptl = SIS964_QUICK; > + break; > + case I2C_SMBUS_BYTE: > + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) | > + (read_write & SMB_RW)); > + if (read_write == I2C_SMBUS_WRITE) > + sis964_write(SMB_CMD, command); > + ptl = SIS964_BYTE; > + break; > + case I2C_SMBUS_BYTE_DATA: > + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) | > + (read_write & SMB_RW)); > + sis964_write(SMB_CMD, command); > + if (read_write == I2C_SMBUS_WRITE) > + sis964_write(SMB_BYTE, data->byte); > + ptl = SIS964_BYTE_DATA; > + break; > + case I2C_SMBUS_PROC_CALL: > + case I2C_SMBUS_WORD_DATA: > + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) | > + (read_write & SMB_RW)); > + sis964_write(SMB_CMD, command); > + if (read_write == I2C_SMBUS_WRITE) { > + sis964_write(SMB_BYTE, data->word & SMB_BYTE0); > + sis964_write(SMB_BYTE + 1, > + (data->word & SMB_BYTE1) >> 8); > + } > + ptl = (ptl == I2C_SMBUS_PROC_CALL ? > + SIS964_PCALL : SIS964_WORD_DATA); > + break; > + case I2C_SMBUS_BLOCK_DATA: > + sis964_write(SMB_ADDR, ((addr << 1) & SMB_ADDRESS) | > + (read_write & SMB_RW)); > + sis964_write(SMB_CMD, command); > + ptl = SIS964_BLOCK_DATA; > + return sis964_block_data(adap, data, read_write); > + default: > + dev_warn(&adap->dev, "Unsupported transaction %d\n", > + ptl); > + return -EOPNOTSUPP; > + } > + > + tmp = sis964_transaction(adap, ptl); > + if (tmp) > + return tmp; > + > + if (ptl != SIS964_PCALL && > + (read_write == I2C_SMBUS_WRITE || ptl == SIS964_QUICK)) { > + return 0; > + } > + > + switch (ptl) { > + case SIS964_BYTE: > + case SIS964_BYTE_DATA: > + data->byte = sis964_read(SMB_BYTE); > + break; > + case SIS964_PCALL: > + case SIS964_WORD_DATA: > + data->word = sis964_read(SMB_BYTE) + > + (sis964_read(SMB_BYTE + 1) << 8); > + break; > + } > + > + return 0; > +} > + > +static u32 sis964_func(struct i2c_adapter *adapter) > +{ > + /* SMBus Command protocol supported */ > + return I2C_FUNC_SMBUS_QUICK | /* Quick command */ > + I2C_FUNC_SMBUS_BYTE | /* Send/Receive Byte */ > + I2C_FUNC_SMBUS_BYTE_DATA | /* Read/Write Byte Data */ > + I2C_FUNC_SMBUS_WORD_DATA | /* Read/Write Word Data */ > + I2C_FUNC_SMBUS_PROC_CALL | /* Process Call */ > + I2C_FUNC_SMBUS_BLOCK_DATA; /* Read/Write Block Data */ > +} > + > +static int __devinit sis964_setup(struct pci_dev *sis964_dev) > +{ > + unsigned char b; > + struct pci_dev *dummy = NULL; > + int tmp = 0, i; > + > + /* check for supported SiS devices */ > + for (i = 0; supported[i] > 0 && dummy == NULL; i++) > + dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy); > + > + if (dummy) { > + pci_dev_put(dummy); > + } else if (force) { > + dev_err(&sis964_dev->dev, > + "WARNING: Can't detect SIS964 compatible device, but " > + "loading because of force option enabled\n"); > + } else { > + return -ENODEV; > + } > + > + > + /* > + Enable ACPI first , so we can accsess reg 74-75 > + in acpi io space and read acpi base addr > + */ > + if (pci_read_config_byte(sis964_dev, SIS964_BIOS_CTL_REG, &b)) { > + dev_err(&sis964_dev->dev, "Error: Can't read bios ctl reg\n"); > + return -ENODEV; > + } > + /* if ACPI already enabled , do nothing */ > + if (!(b & 0x80) && > + pci_write_config_byte(sis964_dev, SIS964_BIOS_CTL_REG, b | 0x80)) { > + dev_err(&sis964_dev->dev, "Error: Can't enable ACPI\n"); > + return -ENODEV; > + } > + > + /* Determine the ACPI base address */ > + if (pci_read_config_word(sis964_dev, SIS964_ACPI_BASE_REG, > + &acpi_base)) { > + dev_err(&sis964_dev->dev, > + "Error: Can't determine ACPI base address\n"); > + return -ENODEV; > + } > + > + dev_dbg(&sis964_dev->dev, "ACPI base at 0x%04x\n", acpi_base); > + > + tmp = acpi_check_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION, > + sis964_driver.name); > + if (tmp) { > + acpi_base = 0; > + return -ENODEV; > + } > + > + /* Everything is happy, let's grab the memory and set things up. */ > + if (!request_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION, > + sis964_driver.name)) { > + dev_err(&sis964_dev->dev, > + "SMBus registers 0x%04x-0x%04x already in use!\n", > + acpi_base + SMB_STS, acpi_base + SMB_SAA); > + acpi_base = 0; > + return -ENODEV; > + } > + > + return 0; > +} > + > + > +static const struct i2c_algorithm smbus_algorithm = { > + .smbus_xfer = sis964_access, > + .functionality = sis964_func, > +}; > + > +static struct i2c_adapter sis964_adapter = { > + .owner = THIS_MODULE, > + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, > + .algo = &smbus_algorithm, > +}; > + > +static DEFINE_PCI_DEVICE_TABLE(sis964_ids) = { > + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) }, > + { 0 } > +}; > + > +MODULE_DEVICE_TABLE(pci, sis964_ids); > + > +static int __devinit sis964_probe(struct pci_dev *dev, > + const struct pci_device_id *id) > +{ > + if (sis964_setup(dev)) { > + dev_err(&dev->dev, > + "SIS964 comp. bus not detected, module not inserted.\n"); > + return -ENODEV; > + } > + > + /* set up the sysfs linkage to our parent device */ > + sis964_adapter.dev.parent = &dev->dev; > + > + snprintf(sis964_adapter.name, sizeof(sis964_adapter.name), > + "SMBus SIS964 adapter at %04xh", acpi_base + SMB_STS); > + > + return i2c_add_adapter(&sis964_adapter); > +} > + > +static void __devexit sis964_remove(struct pci_dev *dev) > +{ > + dev_dbg(&dev->dev, "sis964_remove"); > + > + if (acpi_base) { > + i2c_del_adapter(&sis964_adapter); > + release_region(acpi_base + SMB_STS, SIS964_SMB_IOREGION); > + acpi_base = 0; > + } > +} > + > + > +static struct pci_driver sis964_driver = { > + .name = "sis964_smbus", > + .id_table = sis964_ids, > + .probe = sis964_probe, > + .remove = __devexit_p(sis964_remove), > +}; > + > +module_pci_driver(sis964_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Amaury Decrême <amaury.decreme@xxxxxxxxx>"); > +MODULE_DESCRIPTION("SiS964 SMBus driver"); > diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h > index ab741b0..0ffc982 100644 > --- a/include/linux/pci_ids.h > +++ b/include/linux/pci_ids.h > @@ -699,6 +699,7 @@ > #define PCI_DEVICE_ID_SI_961 0x0961 > #define PCI_DEVICE_ID_SI_962 0x0962 > #define PCI_DEVICE_ID_SI_963 0x0963 > +#define PCI_DEVICE_ID_SI_964 0x0964 Please read the comment at the top of this file; I don't think this addition qualifies as something that should be added. > #define PCI_DEVICE_ID_SI_965 0x0965 > #define PCI_DEVICE_ID_SI_966 0x0966 > #define PCI_DEVICE_ID_SI_968 0x0968 > -- > 1.7.8.6 > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
