Re: [PATCHv3 06/17] i2c: omap: split out [XR]DR and [XR]RDY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Jun 29, 2012 at 03:43:26PM +0530, Shubhrajyoti D wrote:
> From: Felipe Balbi <balbi@xxxxxx>
> 
> While they do pretty much the same thing, there
> are a few peculiarities. Specially WRT erratas,
> it's best to split those out and re-factor the
> read/write loop to another function which both
> cases call.
> 
> This last part will be done on another patch.
> 
> While at that, also avoid an unncessary register
> read since dev->fifo_len will always contain the
> correct amount of data to be transferred.

this statement isn't valid anymore, but I'd like it to be. See below

> Signed-off-by: Felipe Balbi <balbi@xxxxxx>
> Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
> ---
>  drivers/i2c/busses/i2c-omap.c |  126 ++++++++++++++++++++++++++++++----------
>  1 files changed, 94 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 359ee08..45bd731 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -820,36 +820,64 @@ complete:
>  			return IRQ_HANDLED;
>  		}
>  
> -		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
> +		if (stat & OMAP_I2C_STAT_RDR) {
>  			u8 num_bytes = 1;
>  
> +			if (dev->fifo_size)
> +				num_bytes = (omap_i2c_read_reg(dev,
> +						OMAP_I2C_BUFSTAT_REG) >> 8)
> +						& 0x3F;

I wanted to avoid reading registers if we don't have to. This value will
be sitting in dev->buf_len.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux