In omap_i2c_xfer(), ensure pm_runtime_put() is called, even on failure. Without this, after a failed xfer, the runtime PM usecount will have been incremented, but not decremented causing the usecount to never reach zero after a failure. This keeps the device always runtime PM enabled which keeps the enclosing power domain active, and prevents full-chip retention/off from happening during idle. Cc: Shubhrajyoti D <shubhrajyoti@xxxxxx> Signed-off-by: Kevin Hilman <khilman@xxxxxx> --- This patch applies to current i2c-embedded/for-next branch drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 9895fa7..b105733 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -582,7 +582,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) r = pm_runtime_get_sync(dev->dev); if (IS_ERR_VALUE(r)) - return r; + goto out; r = omap_i2c_wait_for_bb(dev); if (r < 0) -- 1.7.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
