[PATCH 6/7] i2c-stu300: Use struct dev_pm_ops for power management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rafael J. Wysocki <rjw@xxxxxxx>

Make the ST-Ericsson U300 I2C controller driver define its PM
callbacks through a struct dev_pm_ops object rather than by using
legacy PM hooks in struct platform_driver.

Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
 drivers/i2c/busses/i2c-stu300.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

Index: linux/drivers/i2c/busses/i2c-stu300.c
===================================================================
--- linux.orig/drivers/i2c/busses/i2c-stu300.c
+++ linux/drivers/i2c/busses/i2c-stu300.c
@@ -978,31 +978,33 @@ stu300_probe(struct platform_device *pde
 }
 
 #ifdef CONFIG_PM
-static int stu300_suspend(struct platform_device *pdev, pm_message_t state)
+static int stu300_suspend(struct device *device)
 {
-	struct stu300_dev *dev = platform_get_drvdata(pdev);
+	struct stu300_dev *dev = dev_get_drvdata(device);
 
 	/* Turn off everything */
 	stu300_wr8(0x00, dev->virtbase + I2C_CR);
 	return 0;
 }
 
-static int stu300_resume(struct platform_device *pdev)
+static int stu300_resume(struct device *device)
 {
 	int ret = 0;
-	struct stu300_dev *dev = platform_get_drvdata(pdev);
+	struct stu300_dev *dev = dev_get_drvdata(device);
 
 	clk_enable(dev->clk);
 	ret = stu300_init_hw(dev);
 	clk_disable(dev->clk);
 
 	if (ret != 0)
-		dev_err(&pdev->dev, "error re-initializing hardware.\n");
+		dev_err(device, "error re-initializing hardware.\n");
 	return ret;
 }
+
+static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
+#define STU300_I2C_PM	(&stu300_pm)
 #else
-#define stu300_suspend NULL
-#define stu300_resume NULL
+#define STU300_I2C_PM	NULL
 #endif
 
 static int __exit
@@ -1026,10 +1028,9 @@ static struct platform_driver stu300_i2c
 	.driver = {
 		.name	= NAME,
 		.owner	= THIS_MODULE,
+		.pm	= STU300_I2C_PM,
 	},
 	.remove		= __exit_p(stu300_remove),
-	.suspend        = stu300_suspend,
-	.resume         = stu300_resume,
 
 };
 

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux