Hi Amaury, On Fri, 3 Aug 2012 17:35:43 +0200, Amaury Decrême wrote: > This series of patches are a I2C bus driver for the SIS964. > > > The SIS964 is nearly the same as SIS630 for the SMBUS : > - Most of the SMBus registers (Status, Enable, Control, > Host Control, etc.) are at the same adresses + 0x60 > - The register count is 21 instead of 20 > > The SIS964 name is ambiguous as this chip isn't part of the SIS96X > family and behaves differently. > > The datasheets have been used to develop the driver based on the > exsiting driver for I2C SIS630 . What is the rationale for not adding support for the new chip to i2c-sis630 then? That would probably be a lot easier to review. > Content of the patches: > - 1/2 The driver itself > - 2/2 Documentation, Kconfig, Makefile, Maintainers This split makes little sense. Integration should come with the driver, otherwise even build-testing is impossible. -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
