Cleanups to i2c-cores, no change in logic, changes are:
* Move i2c-ocores device tree documentation from source file to
Documentation/devicetree/bindings/i2c/i2c-ocores.txt.
* Add \n to dev_warn and dev_err messages where missing
* Minor updates to the text and formatting fixes.
Signed-off-by: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/i2c/i2c-ocores.txt | 27 ++++++++++++
drivers/i2c/busses/i2c-ocores.c | 45 +++-----------------
2 files changed, 34 insertions(+), 38 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ocores.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
new file mode 100644
index 0000000..bfec894
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -0,0 +1,27 @@
+Device tree configuration for i2c-ocores
+
+Required properties:
+- compatible : "opencores,i2c-ocores"
+- reg : bus address start and address range size of device
+- interrupts : interrupt number
+- regstep : size of device registers in bytes
+- clock-frequency : frequency of bus clock in Hz
+- #address-cells : should be <1>
+- #size-cells : should be <0>
+
+Example:
+
+ i2c0: ocores@a0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "opencores,i2c-ocores";
+ reg = <0xa0000000 0x8>;
+ interrupts = <10>;
+ regstep = <1>;
+ clock-frequency = <20000000>;
+
+ dummy@60 {
+ compatible = "dummy";
+ reg = <0x60>;
+ };
+ };
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 75194c5..e8159db 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -10,40 +10,9 @@
*/
/*
- * Device tree configuration:
- *
- * Required properties:
- * - compatible : "opencores,i2c-ocores"
- * - reg : bus address start and address range size of device
- * - interrupts : interrupt number
- * - regstep : size of device registers in bytes
- * - clock-frequency : frequency of bus clock in Hz
- *
- * Example:
- *
- * i2c0: ocores@a0000000 {
- * compatible = "opencores,i2c-ocores";
- * reg = <0xa0000000 0x8>;
- * interrupts = <10>;
- *
- * regstep = <1>;
- * clock-frequency = <20000000>;
- *
- * -- Devices connected on this I2C bus get
- * -- defined here; address- and size-cells
- * -- apply to these child devices
- *
- * #address-cells = <1>;
- * #size-cells = <0>;
- *
- * dummy@60 {
- * compatible = "dummy";
- * reg = <60>;
- * };
- * };
- *
+ * This driver can be used from the device tree, see
+ * Documentation/devicetree/bindings/i2c/ocore-i2c.txt
*/
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -247,14 +216,14 @@ static struct i2c_adapter ocores_adapter = {
};
#ifdef CONFIG_OF
-static int ocores_i2c_of_probe(struct platform_device* pdev,
- struct ocores_i2c* i2c)
+static int ocores_i2c_of_probe(struct platform_device *pdev,
+ struct ocores_i2c *i2c)
{
const __be32* val;
val = of_get_property(pdev->dev.of_node, "regstep", NULL);
if (!val) {
- dev_err(&pdev->dev, "Missing required parameter 'regstep'");
+ dev_err(&pdev->dev, "Missing required parameter 'regstep'\n");
return -ENODEV;
}
i2c->regstep = be32_to_cpup(val);
@@ -262,7 +231,7 @@ static int ocores_i2c_of_probe(struct platform_device* pdev,
val = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
if (!val) {
dev_err(&pdev->dev,
- "Missing required parameter 'clock-frequency'");
+ "Missing required parameter 'clock-frequency'\n");
return -ENODEV;
}
i2c->clock_khz = be32_to_cpup(val) / 1000;
@@ -351,7 +320,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
return 0;
}
-static int __devexit ocores_i2c_remove(struct platform_device* pdev)
+static int __devexit ocores_i2c_remove(struct platform_device *pdev)
{
struct ocores_i2c *i2c = platform_get_drvdata(pdev);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
