change log [v4->v3]: 1, provide unified suspend/resume api for all sub-devices, and add protection for 800 & 805 wakeup flag in SMP case. 2, clean register definition in 88pm80x.h, and thanks Arnd's help. 3, some minor changes in mfd Kconfig/Makefile. change log [v3->v2]: 1, dynamically get the irq_base, for both regmap_add_irq_chip and mfd_add_devices. add pm80x_request_irq & pm80x_free_irq for sub-driver facility, and modify related irq thread operation. remove irq_base member from 80x_chip & platform data. 2, split 88pm80x.o into 3 separate modules. 3, remove the 88pm80x r/w API, and directly use open-coded regmap api. 4, minor change: move pm80x_id_table from 80x-i2c.c to 800/805-core.c, exported pm80x_init, pm80x_deinit, and pm80x_bulk_read, add callback in pdata. change log [v2->v1]: 1, split 88pm80x-core.c into 88pm800-core.c and 88pm805.c, per Arnd's suggestion. after the re-arch, 88pm80x-i2c handles the 800 & 805 common parts, while 800-core.c & 805-core.c handle the specific parts in each chip. 2, add details about the workaround adding a i2c companion between 800 & 805, and make a separate patch for it, per Arnd's suggestion. 3, remove callback in pdata. but still keep the pdata currently. 4, only keep necessary register in 88pm80x.h, including registers for regulator/rtc/onkey/power/codec etc, and remove other registers from global visibility. 5, exported r/w API which requires regmap handle. as currently the pm800 chip has 3 i2c device, only passing a pm80x_chip info can't ensure r/w the register in correct i2c device. change log [v1]: 1, pm800 and pm805 are decoupled and probed separately; 2, re-used the most of API for pm800 and pm805 per Arnd's comments; 3, use regmap_irq, instead of previous 88pm80x_irq_data per Mark's comments. use regmap_add_irq_chip, and remove previous 88pm80x irq handling. 4, remove callback function in rtc pdata per Arnd's comments. 5, updated some coding style issue. Qiao Zhou (4): mfd: support 88pm80x in 80x driver mfd: workaround: add companion chip in 88pm80x rtc: add rtc support to 88PM80X PMIC input: add onkey support to 88PM80X PMIC drivers/input/misc/88pm80x_onkey.c | 176 +++++++++++ drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 + drivers/mfd/88pm800-core.c | 593 ++++++++++++++++++++++++++++++++++++ drivers/mfd/88pm805-core.c | 299 ++++++++++++++++++ drivers/mfd/88pm80x-i2c.c | 144 +++++++++ drivers/mfd/Kconfig | 24 ++ drivers/mfd/Makefile | 3 + drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-88pm80x.c | 371 ++++++++++++++++++++++ include/linux/mfd/88pm80x.h | 377 +++++++++++++++++++++++ 12 files changed, 2009 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/88pm80x_onkey.c create mode 100644 drivers/mfd/88pm800-core.c create mode 100644 drivers/mfd/88pm805-core.c create mode 100644 drivers/mfd/88pm80x-i2c.c create mode 100644 drivers/rtc/rtc-88pm80x.c create mode 100644 include/linux/mfd/88pm80x.h -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
