Linux Device Tree
[Prev Page][Next Page]
- Re: [PATCH v1 08/10] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 0/7] RISC-V: Detect and report speed of unaligned vector accesses
- From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
- Re: [PATCH v1 1/4] dt-bindings: ata: Add i.MX8QM AHCI compatible string
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 7/7] RISC-V: hwprobe: Document unaligned vector perf key
- From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
- Re: [PATCH v2 3/4] dt-bindings: mtd: macronix,mx25l12833f: add SPI-NOR chip
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH v2 3/4] dt-bindings: mtd: macronix,mx25l12833f: add SPI-NOR chip
- From: Erez <erezgeva2@xxxxxxxxx>
- [PATCH v4 7/7] RISC-V: hwprobe: Document unaligned vector perf key
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 6/7] RISC-V: Report vector unaligned access speed hwprobe
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 5/7] RISC-V: Detect unaligned vector accesses supported
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 4/7] RISC-V: Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 3/7] RISC-V: Check scalar unaligned access on all CPUs
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 2/7] dt-bindings: riscv: Add Zicclsm ISA extension description.
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 1/7] RISC-V: Add Zicclsm to cpufeature and hwprobe
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v4 0/7] RISC-V: Detect and report speed of unaligned vector accesses
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: layerscape: move dwc3 usb under glue layer node
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 3/6] dt-bindings: iio: dac: Generalize DAC common properties
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 01/12] dt-bindings: PCI: Change brcmstb YAML maintainer
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: serial: samsung: fix maxItems for gs101 & document earlycon requirements
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v1 10/10] iio: pressure bmp280: Move bmp085 interrupt to new configuration
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 09/10] iio: pressure: bmp280: Add data ready trigger support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 08/10] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 07/10] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 06/10] iio: pressure: bmp280: Remove config error check for IIR filter updates
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 05/10] iio: pressure: bmp280: Add support for bmp280 soft reset
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 04/10] iio: pressure: bmp280: Use bulk read for humidity calibration data
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 03/10] iio: pressure: bmp280: Sort headers alphabetically
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 02/10] iio: pressure: bmp280: Fix waiting time for BMP3xx configuration
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 01/10] iio: pressure: bmp280: Fix regmap for BMP280 device
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v1 00/10] BMP280: Minor cleanup and interrupt support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: humidity: add ENS21x sensor family
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: clock: add RMII clock selection
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 06/10] dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/6] ASoC: Add NTP8918 and NTP8835 codecs support
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 3/3] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 2/3] pwm: imx27: Add 32k clock for pwm in i.MX8QXP MIPI subsystem
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 1/3] dt-bindings: pwm: imx: Add compatible string imx8qxp-mipi-pwm
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 0/3] pwm: imx: add 32k clock for 8qm/qxp and workaround a chip issue
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 2/2] arm64: dts: rockchip: add support for Radxa ROCK Pi E v3.0
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 1/2] arm64: dts: rockchip: add support for Radxa ROCK Pi E v3.0
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH V3 1/2] dt-bindings: firmware: arm,scmi: introduce property mbox-rx-timeout-ms
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 7/8] RISC-V: Report vector unaligned access speed hwprobe
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- Re: [PATCH v5 6/7] rtc: support i.MX95 BBM RTC
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH v3 6/7] mfd: Add support for LAN966x PCI device
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/8] RISC-V: Check scalar unaligned access on all CPUs
- From: Jesse Taube <jesse@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: amlogic: add support for Radxa ZERO 2 Pro
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: arm: amlogic: add support for Radxa ZERO 2 Pro
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 2/2] arm64: dts: amlogic: add support for Radxa ZERO 2 Pro
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm: amlogic: add support for Radxa ZERO 2 Pro
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS9100
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 3/4] dt-bindings: mtd: macronix,mx25l12833f: add SPI-NOR chip
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH v5 0/7] firmware: support i.MX95 SCMI BBM/MISC Extenstion
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v4 3/3] Documentation: iio: Document ad4695 driver
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v4 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v4 0/3] iio: adc: ad4695: new driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 6/7] mfd: Add support for LAN966x PCI device
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v11 4/4] net: phy: bcm-phy-lib: Implement BroadR-Reach link modes
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 3/4] dt-bindings: mtd: macronix,mx25l12833f: add SPI-NOR chip
- From: Erez <erezgeva2@xxxxxxxxx>
- Re: [PATCH v26 2/3] reset: npcm: register npcm8xx clock auxiliary bus device
- From: Tomer Maimon <tmaimon77@xxxxxxxxx>
- Re: [PATCH v26 3/3] clk: npcm8xx: add clock controller
- From: Tomer Maimon <tmaimon77@xxxxxxxxx>
- Re: [PATCH v11 1/4] net: phy: bcm54811: New link mode for BroadR-Reach
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 3/4] bingdings: can: flexcan: move fsl,imx95-flexcan standalone
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH 4/4] can: flexcan: add wakeup support for imx95
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 3/4] bingdings: can: flexcan: move fsl,imx95-flexcan standalone
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 2/4] can: flexcan: Add S32V234 support to FlexCAN driver
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 1/4] dt-bindings: can: fsl,flexcan: add compatible string fsl,s32v234-flexcan
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 0/4] can: fsl,flexcan: add fsl,s32v234-flexcan and imx95 wakeup
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v26 3/3] clk: npcm8xx: add clock controller
- From: Benjamin Fair <benjaminfair@xxxxxxxxxx>
- Re: [PATCH v26 2/3] reset: npcm: register npcm8xx clock auxiliary bus device
- From: Benjamin Fair <benjaminfair@xxxxxxxxxx>
- Re: [PATCH v10 2/4] Input: touch-overlay - Add touchscreen overlay handling
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v2 2/2] arm64: tegra: enable same UARTs for Orin NX/Nano
- From: Vedant Deshpande <vedantd@xxxxxxxxxx>
- [PATCH v2 1/2] arm64: tegra: Add DMA properties for Tegra234 UARTA
- From: Vedant Deshpande <vedantd@xxxxxxxxxx>
- [PATCH v2 0/2] arm64: tegra: Tegra234 UART updates
- From: Vedant Deshpande <vedantd@xxxxxxxxxx>
- Re: [PATCH v3 1/7] mfd: syscon: Add reference counting and device managed support
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 0/2] Input: exc3000 - EXC81W32 controller support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH v3 7/7] riscv: dts: thead: add clock to TH1520 gpio nodes
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 6/7] riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 5/7] riscv: dts: thead: change TH1520 mmc nodes to use clock controller
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 4/7] riscv: dts: thead: change TH1520 uart nodes to use clock controller
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 2/7] clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 3/7] riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 1/7] dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH v3 0/7] clk: thead: Add support for TH1520 AP_SUBSYS clock controller
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- Re: [PATCH v11 1/4] net: phy: bcm54811: New link mode for BroadR-Reach
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- [PATCH] dt-bindings: spi: at91: Add sama7d65 compatible string
- From: <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH v3 6/7] mfd: Add support for LAN966x PCI device
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: Aw: Re: [PATCH v1 0/4] add syscon requirement for mt7988
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/3] spi: dt-bindings: Add num-cs property for mpfs-spi
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: Probe failure of usb controller @11290000 on MT8195 after next-20231221
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/7] mfd: syscon: Add reference counting and device managed support
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 1/7] mfd: syscon: Add reference counting and device managed support
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: serial: samsung: fix maxItems for gs101 & document earlycon requirements
- From: André Draszik <andre.draszik@xxxxxxxxxx>
- Re: [PATCH v4 00/10] riscv: add initial support for SpacemiT K1
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: mmc: sdhci-sprd: convert to YAML
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: serial: samsung: fix maxItems for gs101 & document earlycon requirements
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: mediatek: mt8195: Add power domain to secondary XHCI
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v6 3/6] dt-bindings: iio: dac: Generalize DAC common properties
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v5 15/27] dt-bindings: interrupt-controller: Document the property microchip,nr-irqs
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH v3 6/7] mfd: Add support for LAN966x PCI device
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v1 0/2] PCI: ti: k3: Fix TI J721E PERST# polarity
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v2] dt-bindings: phy: hisilicon,hi3798cv200-combphy: Convert to DT schema
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 4/6] regulator: Add Renesas RZ/G2L USB VBUS regulator driver
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [no subject]
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: mediatek: mt8195: Add power domain to secondary XHCI
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- RE: [PATCH v4 4/6] regulator: Add Renesas RZ/G2L USB VBUS regulator driver
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH V3 0/4] Add Anbernic RG35XX-SP
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v4 4/6] regulator: Add Renesas RZ/G2L USB VBUS regulator driver
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 12/13] media: qcom: camss: Add sm8550 support
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 0/2] PCI: ti: k3: Fix TI J721E PERST# polarity
- From: Niklas Cassel <cassel@xxxxxxxxxx>
- Re: [PATCH V3 0/4] Add Anbernic RG35XX-SP
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: Introduce J742S2 SoC and EVM
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 3/4] rtc: stm32: add Low Speed Clock Output (LSCO) support
- From: Valentin Caron <valentin.caron@xxxxxxxxxxx>
- [PATCH 1/4] dt-bindings: rtc: stm32: describe pinmux nodes
- From: Valentin Caron <valentin.caron@xxxxxxxxxxx>
- [PATCH 2/4] rtc: stm32: add pinctrl and pinmux interfaces
- From: Valentin Caron <valentin.caron@xxxxxxxxxxx>
- [PATCH 0/4] rtc: stm32: add pinctrl interface to handle RTC outs
- From: Valentin Caron <valentin.caron@xxxxxxxxxxx>
- [PATCH 4/4] rtc: stm32: add alarm A out feature
- From: Valentin Caron <valentin.caron@xxxxxxxxxxx>
- Re: [PATCH v5 0/7] firmware: support i.MX95 SCMI BBM/MISC Extenstion
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 3/5] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 7/7] input: keyboard: support i.MX95 BBM module
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v5 6/7] rtc: support i.MX95 BBM RTC
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v5 5/7] firmware: imx: add i.MX95 MISC driver
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [RFC V3 2/4] firmware: arm_scmi: vendors: Add ARM SCMI QCOM vendor protocol v1.0
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- Re: [RFC V3 1/4] dt-bindings: firmware: Document bindings for ARM SCMI QCOM Vendor Protocol
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- Re: [PATCH v6 3/6] dt-bindings: iio: dac: Generalize DAC common properties
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 10/13] media: qcom: camss: Add support for VFE hardware version Titan 780
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH v2 3/3] coresight-tpda: Optimize the function of reading element size
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v5 4/7] firmware: arm_scmi: add initial support for i.MX MISC protocol
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH] arm64: dts: imx93: update default value for snps,clk-csr
- From: Shenwei Wang <shenwei.wang@xxxxxxx>
- Re: [PATCH v5 1/7] Documentation: firmware-guide: add NXP i.MX95 SCMI documentation
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- [PATCH v1 1/1] ARM: dts: aspeed: minerva: add host0-ready pin
- From: Yang Chen <yangchen.openbmc@xxxxxxxxx>
- [PATCH v1 0/1] Add gpio line name in Meta Minerva BMC(AST2600)
- From: Yang Chen <yangchen.openbmc@xxxxxxxxx>
- Re: [PATCH v2 2/3] coresight: Add source filtering for multi-port output
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v5 2/7] dt-bindings: firmware: add i.MX95 SCMI Extension protocol
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2] dt-bindings: incomplete-devices: document devices without bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [DO NOT MERGE v8 20/36] serial: sh-sci: fix SH4 OF support.
- From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH v4 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- Re: [Linaro-mm-sig] Re: [PATCH 0/8] dma-buf: heaps: Support carved-out heaps and ECC related-flags
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 0/8] dma-buf: heaps: Support carved-out heaps and ECC related-flags
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v5 15/27] dt-bindings: interrupt-controller: Document the property microchip,nr-irqs
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: renesas: r9a08g045: Add DMAC node
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 2/3] dt-bindings: dma: rz-dmac: Document RZ/G3S SoC
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 1/3] clk: renesas: r9a08g045-cpg: Add DMA clocks and resets
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH 0/3] dma: Enable DMA support for the Renesas RZ/G3S SoC
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v3 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH] dt-bindings: phy: drop obsolete qcom,usb-8x16-phy bindings
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/4] arm64: defconfig: Enable hci_uart for Amlogic Bluetooth
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH 2/4] Bluetooth: hci_uart: Add support for Amlogic HCI UART
- From: Yang Li <yang.li@xxxxxxxxxxx>
- Re: [PATCH 11/13] media: qcom: camss: Add notify interface in camss driver
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm IPQ5332 support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 09/11] arm64: dts: renesas: r9a08g045: Add I2C nodes
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 11/11] arm64: dts: renesas: rzg3s-smarc-som: Enable i2c1 node
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 10/11] arm64: dts: renesas: rzg3s-smarc: Enable i2c0 node
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 08/11] i2c: riic: Add support for fast mode plus
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 07/11] dt-bindings: i2c: renesas,riic: Document the R9A08G045 support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 06/11] i2c: riic: Define individual arrays to describe the register offsets
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 03/11] i2c: riic: Use pm_runtime_resume_and_get()
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 05/11] i2c: riic: Add suspend/resume support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 02/11] i2c: riic: Call pm_runtime_get_sync() when need to access registers
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 01/11] i2c: riic: Use temporary variable for struct device
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 00/11] i2c: riic: Add support for Renesas RZ/G3S
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v6 5/6] dt-bindings: iio: dac: Add adi,ltc2672.yaml
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v6 6/6] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v6 4/6] dt-bindings: iio: dac: Add adi,ltc2664.yaml
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v6 3/6] dt-bindings: iio: dac: Generalize DAC common properties
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v6 2/6] iio: ABI: add DAC 42kohm_to_gnd powerdown mode
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v6 1/6] iio: ABI: Generalize ABI documentation for DAC
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v6 0/6] Add driver for LTC2664 and LTC2672
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH 3/4] arm64: defconfig: Enable hci_uart for Amlogic Bluetooth
- From: Yang Li <yang.li@xxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Chen-Yu Tsai <wens@xxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 3/4] clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 2/4] dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm IPQ5332 support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v2 0/4] Add interconnect driver for IPQ5332 SoC
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- RE: [PATCH 3/3] pinctrl: pinctrl-zynqmp: Add support for Versal platform
- From: "Buddhabhatti, Jay" <jay.buddhabhatti@xxxxxxx>
- Re: [PATCH V3 00/13] media: qcom: camss: Add sm8550 support
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- [PATCH v2 5/5] ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 4/5] ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 3/5] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 2/5] ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 1/5] ARM: dts: qcom: apq8064-pins: correct error in drive-strength property
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 0/5] ARM: dts: qcom: adhere to pinctrl dt schema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- Re: [PATCH v7 2/3] PCI: microchip: Fix inbound address translation tables
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] MAINTAINERS: Add an entry for Amlogic HCI UART
- From: Yang Li <yang.li@xxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: x1e80100: Disable SMB2360_2 by default
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH 1/2] arm64: dts: qcom: x1e80100: Fix up hex style
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH 0/2] x1e80100 dt cleanups
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
- From: Yang Li <yang.li@xxxxxxxxxxx>
- [PATCH RESEND v9 1/2] dt-bindings: dma: Add Loongson-1 APB DMA
- From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@xxxxxxxxxx>
- [PATCH RESEND v9 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@xxxxxxxxxx>
- [PATCH RESEND v9 0/2] Add support for Loongson1 APB DMA
- From: Keguang Zhang via B4 Relay <devnull+keguang.zhang.gmail.com@xxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: arm-smmu: Document QCS9100 SMMU
- From: Will Deacon <will@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: soc: qcom,aoss-qmp: Document the QCS9100 AOSS channel
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH 07/13] dt-bindings: media: camss: Add qcom,sm8550-camss binding
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH v6 2/4] dt-bindings: riscv: Add Svade and Svadu Entries
- From: Yong-Xuan Wang <yongxuan.wang@xxxxxxxxxx>
- [PATCH 3/3] pinctrl: pinctrl-zynqmp: Add support for Versal platform
- From: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
- Re: [PATCH 2/4] Bluetooth: hci_uart: Add support for Amlogic HCI UART
- From: Yang Li <yang.li@xxxxxxxxxxx>
- [PATCH 2/3] firmware: xilinx: Add Pinctrl Get Attribute ID
- From: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
- [PATCH 1/3] dt-bindings: pinctrl: Add support for Xilinx Versal platform
- From: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
- [PATCH 0/3] pinctrl: pinctrl-zynqmp: Add Versal platform support
- From: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
- Re: [PATCH v1 2/4] ata: ahci_imx: Clean up code by using i.MX8Q HSIO PHY driver
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- [PATCH v7 2/3] PCI: microchip: Fix inbound address translation tables
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- [PATCH v7 1/3] PCI: microchip: Fix outbound address translation tables
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- [PATCH v7 0/3] Fix address translations on MPFS PCIe controller
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- [PATCH v7 3/3] dt-bindings: PCI: microchip,pcie-host: allow dma-noncoherent
- From: <daire.mcnamara@xxxxxxxxxxxxx>
- Re: [PATCH v1 2/4] ata: ahci_imx: Clean up code by using i.MX8Q HSIO PHY driver
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH V3 4/4] arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH 2/4] drm/bridge: add Microchip DSI controller support for sam9x7 SoC series
- From: <Manikandan.M@xxxxxxxxxxxxx>
- Re: [PATCH v1 3/4] ata: ahci_imx: Enlarge RX water mark for i.MX8QM SATA
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS9100
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Diederik de Haas <didi.debian@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v4 08/10] riscv: dts: add initial SpacemiT K1 SoC device tree
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v4 4/4] riscv: dts: sophgo: Add LicheeRV Nano board device tree
- From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
- [PATCH v4 3/4] riscv: dts: sophgo: Add initial SG2002 SoC device tree
- From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
- [PATCH v4 2/4] dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles
- From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
- [PATCH v4 0/4] Add board support for Sipeed LicheeRV Nano
- From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
- [PATCH v4 1/4] dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic
- From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 2/4] drm/bridge: add Microchip DSI controller support for sam9x7 SoC series
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH V4 8/8] arm64: dts: qcom: sm4450: add camera, display and gpu clock controller
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH V3 3/4] arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v2 5/6] clk: qcom: Add camera clock controller driver for SM8150
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sm8550 compatible
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] arm64: dts: mediatek: mt8195: Add power domain to secondary XHCI
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: arm: Add binding document for Coresight Control Unit device.
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v8 0/3] drm/mediatek: Add support for OF graphs
- From: "Michael Walle" <michael@xxxxxxxx>
- Re: [PATCH v2 0/3] Add support for Amlogic T7 reset controller
- From: Kelvin Zhang <kelvin.zhang@xxxxxxxxxxx>
- Re: Probe failure of usb controller @11290000 on MT8195 after next-20231221
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Chen-Yu Tsai <wens@xxxxxxxxxx>
- Re: Probe failure of usb controller @11290000 on MT8195 after next-20231221
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH 2/4] drm/bridge: add Microchip DSI controller support for sam9x7 SoC series
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2] dt-bindings: incomplete-devices: document devices without bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v2 8/8] arm64: dts: qcom: add OnePlus 8T (kebab)
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: arm: Add binding document for Coresight Control Unit device.
- From: JieGan <quic_jiegan@xxxxxxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 2/4] drm/bridge: add Microchip DSI controller support for sam9x7 SoC series
- From: <Manikandan.M@xxxxxxxxxxxxx>
- [PATCH v1 4/4] ata: ahci_imx: Correct the email address
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v1 3/4] ata: ahci_imx: Enlarge RX water mark for i.MX8QM SATA
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v1 2/4] ata: ahci_imx: Clean up code by using i.MX8Q HSIO PHY driver
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v1 1/4] dt-bindings: ata: Add i.MX8QM AHCI compatible string
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v1 0/4] Refine i.MX8QM SATA based on generic PHY callbacks
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- Re: [PATCH v1 3/3] coresight-tpda: Optimize the function of reading element size
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH v1 2/3] coresight: Add source filtering for multi-port output
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v2 3/3] coresight-tpda: Optimize the function of reading element size
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v2 2/3] coresight: Add source filtering for multi-port output
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v2 0/3] Add source filtering for multi-port output
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: non-dt-devices: document ltr,ltrf216a used via ACPI PRP0001
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v3 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH v3 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- Re: [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: pwm: at91: Add sama7d65 compatible string
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v4 08/10] riscv: dts: add initial SpacemiT K1 SoC device tree
- From: Yixun Lan <dlan@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Bluetooth: hci_qca: use the power sequencer for wcn7850
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: add support for pac1921
- From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v0 2/2] arm64: dts: qcom: ipq5332: Fix interrupt trigger type for usb
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v0 1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v2 2/7] clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V3 1/4] dt-bindings: arm: sunxi: Add Anbernic RG35XXSP
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: thermal: amlogic,thermal: add optional power-domains
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: Introduce J742S2 SoC and EVM
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 02/12] dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: sa8775p: Add UART node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: at91: Add sama7d65 compatible string
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: pwm: at91: Add sama7d65 compatible string
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] arm64: dts: imx93: update default value for snps,clk-csr
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH v9 5/7] coresight: tmc: Add support for reading crash data
- From: Linu Cherian <lcherian@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH 1/2] arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- [PATCH] arm64: dts: ti: Introduce J742S2 SoC and EVM
- From: Manorit Chawdhry <m-chawdhry@xxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: sa8775p: Add UART node
- From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
- Re: [PATCH v6 8/9] soc: qcom: cpr3: Add IPQ9574 definitions
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: Probe failure of usb controller @11290000 on MT8195 after next-20231221
- From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
- Re: [PATCH v3 4/4] riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: phy: describe the Qualcomm SGMII PHY for QCS9100
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 2/2] arm64: dts: amlogic: change product name for Radxa ZERO 2 (Pro)
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH 4/6] ASoC: codecs: Add NeoFidelity NTP8918 codec
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [net-next,PATCH v2] dt-bindings: net: realtek,rtl82xx: Document RTL8211F LED support
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v3 1/1] dt-bindings: net: convert enetc to yaml
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v2 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: media: mediatek: mdp: Change mediatek,gce-events to reference
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- Re: [PATCH v3 4/4] riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: mailbox: Add mediatek,gce-props.yaml
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- [PATCH v3 4/4] clk: samsung: add top clock support for ExynosAuto v920 SoC
- From: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
- [PATCH v3 2/4] arm64: dts: exynos: add initial CMU clock nodes in ExynosAuto v920
- From: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
- [PATCH v3 0/4] initial clock support for exynosauto v920 SoC
- From: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
- From: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
- [PATCH v3 3/4] clk: samsung: clk-pll: Add support for pll_531x
- From: Sunyeal Hong <sunyeal.hong@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] ASoC: dt-bindings: convert qcom sound bindings to yaml
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions
- From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v4 0/3] pwm: meson: add pwm support for A1
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v4 3/3] arm64: dts: meson: a1: add definitions for meson PWM
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v4 2/3] dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: pwm: amlogic: Add optional power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH V3 3/4] arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V3 4/4] arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V3 2/4] arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V3 1/4] dt-bindings: arm: sunxi: Add Anbernic RG35XXSP
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V3 0/4] Add Anbernic RG35XX-SP
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/7] clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH 3/3] arm64: dts: layerscape: move dwc3 usb under glue layer node
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 2/3] usb: dwc3: of-simple: Add compatible string fsl,ls1028a-dwc3
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 1/3] dt-bindings: usb: Add fsl,ls-dwc3.yaml for layerscape usb3 glue layer
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 0/3] usb: dwc3: add fsl,ls-dwc3 glue layer support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v2 3/3] arm64: dts: meson: a1: bind power domain to temperature sensor
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v2 0/3] amlogic SoC's power-domains fixes
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: thermal: amlogic,thermal: add optional power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v3 02/12] dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC
- From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
- [PATCH v3 01/12] dt-bindings: PCI: Change brcmstb YAML maintainer
- From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
- [PATCH v3 00/12] PCI: brcnstb: Enable STB 7712 SOC
- From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
- Re: [PATCH v2 5/6] clk: qcom: Add camera clock controller driver for SM8150
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Bluetooth: hci_qca: use the power sequencer for wcn7850
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: x1e80100-crd: Fix backlight
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: nvmem: convert U-Boot env to a layout
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings/perf: Add Arm NI-700 PMU
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Bluetooth: hci_qca: use the power sequencer for wcn7850
- From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
- [PATCH v7 8/8] clk: Add KUnit tests for clks registered with struct clk_parent_data
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 7/8] clk: Add KUnit tests for clk fixed rate basic type
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 6/8] clk: Add test managed clk provider/consumer APIs
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 5/8] platform: Add test managed platform_device/driver APIs
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 4/8] of: Add a KUnit test for overlays and test managed APIs
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 3/8] dt-bindings: vendor-prefixes: Add "test" vendor for KUnit and friends
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 2/8] of: Add test managed wrappers for of_overlay_apply()/of_node_put()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 1/8] of/platform: Allow overlays to create platform devices from the root node
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v7 0/8] clk: Add kunit tests for fixed rate and parent data
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH] arm64: dts: imx93: update default value for snps,clk-csr
- From: Shenwei Wang <shenwei.wang@xxxxxxx>
- Re: [PATCH v2] dt-bindings: soc: qcom,aoss-qmp: Document the QCS9100 AOSS channel
- From: Chris Lew <quic_clew@xxxxxxxxxxx>
- Re: [PATCH v3 0/6] Bluetooth: hci_qca: use the power sequencer for wcn7850
- From: patchwork-bot+bluetooth@xxxxxxxxxx
- Re: [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: Probe failure of usb controller @11290000 on MT8195 after next-20231221
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v1 3/4] drm/panel: nt36672e: Break some CMDS into helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 2/4] drm/panel: nt35521: Break some CMDS into helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 1/4] drm/panel: boe-tv101wum-nl6: Break some CMDS into helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: (subset) [PATCH v2 0/4] crypto: sun8i-ce: add Allwinner H616 support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH 3/5] Revert "drm/panel-edp: Add SDC ATNA45AF01"
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 2/5] drm/panel: samsung-atna33xc20: Add compatible for ATNA45AF01
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v10 4/9] spi: cadence: Add Marvell SDMA operations
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 3/5] Revert "drm/panel-edp: Add SDC ATNA45AF01"
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- [PATCH 2/5] drm/panel: samsung-atna33xc20: Add compatible for ATNA45AF01
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- [PATCH 5/5] arm64: defconfig: Add CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- [PATCH 4/5] arm64: dts: qcom: x1e80100-crd: Fix backlight
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- [PATCH 1/5] dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- [PATCH 0/5] drm/panel: atna33xc20: Fix the Samsung ATNA45AF01 panel
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- [PATCH] dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS9100
- From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: neil.armstrong@xxxxxxxxxx
- [PATCH] dt-bindings: pwm: at91: Add sama7d65 compatible string
- From: <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS9100
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] dt-bindings: i2c: at91: Add sama7d65 compatible string
- From: <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: mailbox: Add mediatek,gce-props.yaml
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [PATCH] dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/6] dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [GIT PULL] Devicetree fixes for v6.10, part 2
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [PATCH v3 9/9] dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings/perf: Add Arm NI-700 PMU
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH v3 7/9] dt-bindings: interconnect: qcom: msm8939: Fix example
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: add support for pac1921
- From: <Marius.Cristea@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/9] dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH] dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- Re: [PATCH v3 3/9] dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/8] RISC-V: Check scalar unaligned access on all CPUs
- From: Evan Green <evan@xxxxxxxxxxxx>
- Re: [PATCH v3 1/9] dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PowerPC] [PASEMI] Issue with the identification of ATA drives after the of/irq updates 2024-05-29
- From: Christian Zigotzky <chzigotzky@xxxxxxxxxxx>
- Re: [PATCH v1 2/2] HID: i2c-hid: elan: Add elan-ekth6a12nay timing
- From: Doug Anderson <dianders@xxxxxxxxxx>
- Re: [BUG] k3-j784s4-evm/phy-cadence-torrent: Shared reset using exclusive API
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- [PATCH 1/2] arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- [PATCH 0/2] arm64: dts: ti: k3-j784s4-evm: SERDES0 lane cleanup
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: display: bridge: tc358867: Document default DP preemphasis
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: add support for pac1921
- From: <Marius.Cristea@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/2] rtc: stm32: introduce new st,stm32mp25-rtc compatible
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Philipp Puschmann <p.puschmann@xxxxxxxxxxx>
- Re: [PATCH v2 7/9] arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PowerPC] [PASEMI] Issue with the identification of ATA drives after the of/irq updates 2024-05-29
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- [no subject]
- [PATCH v4 1/1] dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v2 7/9] arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- Re: [PATCH v2 7/9] arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: Fix up BAR spaces
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: imx93: add ddr edac support
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 2/2] clk: samsung: gs101: don't mark non-essential (UART) clocks critical
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH v2 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH v2 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- Re: [PATCH v2 3/4] dt-bindings: mtd: macronix,mx25l12833f: add SPI-NOR chip
- From: Esben Haabendal <esben@xxxxxxxxxx>
- [PATCH v3 2/3] arm64: dts: rockchip: remove useless tx/rx_delay for Lunzn Fastrhino R68S
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: rockchip: Enable UHS-I SDR-50 for Lunzn FastRhino R66S
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- [PATCH v3 1/3] arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- [PATCH v3 0/3] arm64: dts: rockchip: fixes support for Lunzn Fastrhino R6xS
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: mailbox: Add mediatek,gce-props.yaml
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH v1] arm64: dts: rockchip: Add missing pinctrl for PCIe30x4 node
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: Fix up BAR spaces
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v2 7/9] arm64: dts: rockchip: use generic Ethernet PHY reset bindings for Lunzn Fastrhino R68S
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: x1e80100: Fix up BAR spaces
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v3 3/5] dt-bindings: display: st7701: Add Anbernic RG28XX panel
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v10 00/38] ep93xx device tree conversion
- From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: document BOE TV101WUM-LL2 DSI Display Panel
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: input: touchscreen: exc3000: add EXC81W32
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 08/13] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2 two-phase MIPI CSI-2 DPHY init
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- [PATCH v3 2/2] arm64: dts: rockchip: Add sdmmc/sdio/emmc reset controls for RK3328
- From: Diederik de Haas <didi.debian@xxxxxxxxx>
- [PATCH v3 1/2] arm64: dts: rockchip: Add sdmmc_ext for RK3328
- From: Diederik de Haas <didi.debian@xxxxxxxxx>
- Re: [PATCH v6 0/5] Support Starry er88577 MIPI-DSI panel
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v3 0/2] sdmmc/sdio/emmc improvements for RK3328
- From: Diederik de Haas <didi.debian@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: serial: samsung: fix maxItems for gs101 & document earlycon requirements
- From: André Draszik <andre.draszik@xxxxxxxxxx>
- [PATCH v3 2/2] clk: samsung: gs101: don't mark non-essential (UART) clocks critical
- From: André Draszik <andre.draszik@xxxxxxxxxx>
- [PATCH v3 0/2] gs101 oriole: UART clock fixes
- From: André Draszik <andre.draszik@xxxxxxxxxx>
- [PATCH v3 2/2] iio: humidity: Add support for ENS21x
- From: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: humidity: add ENS21x sensor family
- From: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v3 0/2] iio: humidity: Add support for en21x sensor family
- From: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 08/13] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2 two-phase MIPI CSI-2 DPHY init
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: (subset) [PATCH v3 0/3] Add I2C support on TH1520
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: humidity: add ENS21x sensor family
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: Aw: Re: [PATCH v1 0/4] add syscon requirement for mt7988
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v2 2/2] iio: humidity: Add support for ENS21x
- From: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/2] iio: humidity: Add support for en21x sensor family
- From: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: iio: humidity: add ENS21x sensor family
- From: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7] dt-bindings: iommu: Convert msm,iommu-v0 to yaml
- From: Will Deacon <will@xxxxxxxxxx>
- Re: [PATCH v10 00/38] ep93xx device tree conversion
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH v2 1/2] ASoC: dt-bindings: qcom,msm8916-wcd-digital-codec: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V3 00/13] media: qcom: camss: Add sm8550 support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: renesas: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on all RZ boards
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v10 2/4] Input: touch-overlay - Add touchscreen overlay handling
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- Re: [PATCH 0/8] dma-buf: heaps: Support carved-out heaps and ECC related-flags
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH 12/13] media: qcom: camss: Add sm8550 support
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Philipp Puschmann <p.puschmann@xxxxxxxxxxx>
- Re: [PATCH 11/13] media: qcom: camss: Add notify interface in camss driver
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 10/13] media: qcom: camss: Add support for VFE hardware version Titan 780
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [no subject]
- [PATCH v2 2/2] ASoC: dt-bindings: qcom,apq8096-sndcard: use dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 1/2] ASoC: dt-bindings: qcom,msm8916-wcd-digital-codec: convert to dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH v2 0/2] ASoC: dt-bindings: convert qcom sound bindings to yaml
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- Re: [RFC V3 3/4] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Aw: Re: [PATCH v1 0/4] add syscon requirement for mt7988
- From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH V3 00/13] media: qcom: camss: Add sm8550 support
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- Re: [PATCH 10/13] media: qcom: camss: Add support for VFE hardware version Titan 780
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 09/13] media: qcom: camss: Add CSID Gen3 support for SM8550
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [RFC PATCH net-next v3 3/8] net: pcs: pcs-mtk-lynxi: add platform driver for MT7988
- From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 3/3] arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v6 8/9] soc: qcom: cpr3: Add IPQ9574 definitions
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 08/13] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2 two-phase MIPI CSI-2 DPHY init
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 08/13] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2 two-phase MIPI CSI-2 DPHY init
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 1/9] soc: qcom: cpr3: Fix 'acc_desc' usage
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH V3 00/13] media: qcom: camss: Add sm8550 support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 07/13] dt-bindings: media: camss: Add qcom,sm8550-camss binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 2/9] cpufreq: qcom-nvmem: Add support for IPQ9574
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v6 1/9] soc: qcom: cpr3: Fix 'acc_desc' usage
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 07/13] dt-bindings: media: camss: Add qcom,sm8550-camss binding
- From: Depeng Shao <quic_depengs@xxxxxxxxxxx>
- [no subject]
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Diederik de Haas <didi.debian@xxxxxxxxx>
- Re: [PATCH v1 3/3] arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: sa8775p: Add UART node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v1 0/4] add syscon requirement for mt7988
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v1 3/3] arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] PCI: qcom-ep: Add HDMA support for QCS9100 SoC
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100-crd: Add LID switch
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: Add bindings for Everest ES7243E
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: codecs: add ES7243E ADC driver
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: PCI: qcom-ep: Add support for QCS9100 SoC
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: input: touchscreen: exc3000: add EXC81W32
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH 6/6] ASoC: codecs: Add NeoFidelity NTP8835 codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 0/2] Input: exc3000 - EXC81W32 controller support
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- [PATCH v3 2/2] Input: exc3000 - add EXC81W32 support
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: input: touchscreen: exc3000: add EXC81W32
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: add qcs9100-tlmm compatible
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] PCI: qcom: Add QCS9100 PCIe compatible
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH 5/6] ASoC: dt-bindings: Add bindings for NeoFidelity NTP8835
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/6] ASoC: dt-bindings: Add bindings for NeoFidelity NTP8918
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: crypto: ice: Document QCS9100 inline crypto engine
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: vendor-prefixes: Add NeoFidelity, Inc
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Philipp Puschmann <p.puschmann@xxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: ufs: qcom: document QCS9100 UFS
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: crypto: ice: Document QCS9100 inline crypto engine
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/1] dt-bindings: fsl-qdma: fix interrupts 'if' check logic
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: dma: sprd,sc9860-dma: convert to YAML
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: add qcs9100-tlmm compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/1] dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: phy: describe the Qualcomm SGMII PHY for QCS9100
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: humidity: Add support for ENS21x
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: humidity: add ENS21x sensor family
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3] arm64: dts: freescale: imx8mp-phycore: Add no-eth overlay
- From: Benjamin Hahn <B.Hahn@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Diederik de Haas <didi.debian@xxxxxxxxx>
- RE: [PATCH v2 2/4] arm64: dts: exynos: add initial CMU clock nodes in Exynos Auto v920
- From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
- Re: [PATCH v5 2/9] scatterlist: Add a flag for the restricted memory
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: freescale: imx8mp-phycore: Add no-eth overlay
- From: Benjamin Hahn <B.Hahn@xxxxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: sa8775p: Add UART node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: Add uart dma names to the SoC dtsi for RK356x
- From: Philipp Puschmann <p.puschmann@xxxxxxxxxxx>
- [PATCH v1] arm64: dts: qcom: sa8775p: Add UART node
- From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
- Re: [PATCH 07/13] dt-bindings: media: camss: Add qcom,sm8550-camss binding
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH v6 2/2] cpufreq: add virtual-cpufreq driver
- From: Marc Zyngier <maz@xxxxxxxxxx>
- Re: [PATCH v5 15/27] dt-bindings: interrupt-controller: Document the property microchip,nr-irqs
- From: Marc Zyngier <maz@xxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: imx95: Add NETCMIX block control support
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v2 3/4] clk: imx95: enable the clock of NETCMIX block control
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v2 2/4] dt-bindings: clock: add RMII clock selection
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v2 1/4] dt-bindings: clock: add i.MX95 NETCMIX block control
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v2 0/4] add NETCMIX block control support on i.MX95
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH] arm64: tegra: enable same UARTs for Orin NX/Nano
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH v7 net-next 2/2] net: airoha: Introduce ethernet support for EN7581 SoC
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v7 net-next 1/2] dt-bindings: net: airoha: Add EN7581 ethernet controller
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v7 net-next 0/2] Introduce EN7581 ethernet support
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions
- From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v1 3/4] drm/panel: nt36672e: Break some CMDS into helper functions
- From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v1 2/4] drm/panel: nt35521: Break some CMDS into helper functions
- From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v1 1/4] drm/panel: boe-tv101wum-nl6: Break some CMDS into helper functions
- From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v1 0/4] Break some CMDS into helper functions
- From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH 2/3] ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH 1/3] ARM: dts: qcom: apq8064: adhere to pinctrl dtschema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- [PATCH 0/3] ARM: dts: qcom: adhere to pinctrl dt schema
- From: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: vendor-prefixes: Add prefix for ieisystem
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: dt-bindings: qcom,apq8096-sndcard: use dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: (subset) [PATCH v3 0/3] Add I2C support on TH1520
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: qcom,msm8916-wcd-digital-codec: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100-crd: Add LID switch
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH 4/4] dt-bindings: pinctrl: qcom,apq8084-pinctrl: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: pinctrl: qcom,ipq4019-pinctrl: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: (subset) [PATCH v3 0/3] Add I2C support on TH1520
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 07/10] clocksource: realtek: Add timer driver for rtl-otto platforms
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v5 05/10] dt-bindings: timer: Add schema for realtek,otto-timer
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: x1e80100-crd: Add LID switch
- From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: pinctrl: qcom,ipq8064-pinctrl: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: pinctrl: qcom,apq8064-pinctrl: convert to dtschema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 0/3] i2c: mux: gpio: Add 'settle-time-us' property
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v3 3/3] i2c: mux: gpio: Add support for the 'settle-time-us' property
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v3 2/3] i2c: mux: gpio: Re-order #include to match alphabetic order
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: i2c: gpio: Add 'settle-time-us' property
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH 0/6] Binding and driver for "dumb" clock generators
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: (subset) [PATCH 0/2] Watchdog: support for Amlogic SoC A4/A5
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [RFC] arm64: dts: ti: introduce a minimal am642 device tree
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH] ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
- From: Animesh Agarwal <animeshagarwal28@xxxxxxxxx>
- Re: [PATCH v2 0/2] net: stmmac: dwmac-qcom-ethqos: Add QCS9100 ethqos compatible
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] PCI: qcom-ep: Add HDMA support for QCS9100 SoC
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH 4/6] dt-bindings: memory: fsl: Add compatible string nxp, imx9-memory-controller
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 05/13] riscv: vector: Use vlenb from DT for thead
- From: Guo Ren <guoren@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: PCI: qcom-ep: Add support for QCS9100 SoC
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] PCI: qcom: Add QCS9100 PCIe compatible
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v4 4/4] PCI: mediatek-gen3: Add Airoha EN7581 support
- From: Jianjun Wang (王建军) <Jianjun.Wang@xxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: clocks: add binding for generic clock-generators
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- RE: [PATCH v2 3/4] clk: samsung: clk-pll: Add support for pll_531x
- From: "sunyeal.hong" <sunyeal.hong@xxxxxxxxxxx>
- RE: [PATCH v2 2/4] arm64: dts: exynos: add initial CMU clock nodes in Exynos Auto v920
- From: "sunyeal.hong" <sunyeal.hong@xxxxxxxxxxx>
- Re: [RFC] arm64: dts: ti: introduce a minimal am642 device tree
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/6] dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 3/4] PCI: mediatek-gen3: Rely on reset_bulk APIs for PHY reset lines
- From: Jianjun Wang (王建军) <Jianjun.Wang@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] PCI: qcom: Add support for QCS9100 SoC
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: PCI: Document compatible for QCS9100
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v4 2/4] PCI: mediatek-gen3: Add mtk_gen3_pcie_pdata data structure
- From: Jianjun Wang (王建军) <Jianjun.Wang@xxxxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: PCI: mediatek-gen3: add support for Airoha EN7581
- From: Jianjun Wang (王建军) <Jianjun.Wang@xxxxxxxxxxxx>
- [PATCH 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- [PATCH 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
- From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
- Re: [PATCH v5 9/9] dts: arm64: qcom: ipq9574: Enable CPR
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 9/9] arm64: dts: qcom: ipq9574: Enable CPR
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 8/9] soc: qcom: cpr3: Add IPQ9574 definitions
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 7/9] clk: qcom: gcc-ipq9574: Add CPR clock definition
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 6/9] dt-bindings: clock: Add CPR clock defines for IPQ9574
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 5/9] pmdomain: qcom: rpmpd: Add IPQ9574 power domains
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 4/9] dt-bindings: soc: qcom: cpr3: Add bindings for IPQ9574
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 3/9] dt-bindings: power: rpmpd: Add IPQ9574 power domains
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 2/9] cpufreq: qcom-nvmem: Add support for IPQ9574
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 1/9] soc: qcom: cpr3: Fix 'acc_desc' usage
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 0/9] Enable CPR for IPQ9574
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [BUG] k3-j784s4-evm/phy-cadence-torrent: Shared reset using exclusive API
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v5 10/10] mips: dts: realtek: Add RTL9302C board
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 09/10] mips: generic: add fdt fixup for Realtek reference board
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 07/10] clocksource: realtek: Add timer driver for rtl-otto platforms
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 05/10] dt-bindings: timer: Add schema for realtek,otto-timer
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 08/10] mips: select REALTEK_OTTO_TIMER for Realtek platforms
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 06/10] dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 04/10] dt-bindings: mips: realtek: Add rtl930x-soc compatible
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 01/10] mips: dts: realtek: use "serial" instead of "uart" in node name
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 00/10] mips: Support for RTL9302C
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 02/10] mips: dts: realtek: add device_type property to cpu node
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 03/10] dt-bindings: vendor-prefixes: Add Cameo Communications
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- Re: [PowerPC] [PASEMI] Issue with the identification of ATA drives after the of/irq updates 2024-05-29
- From: Christian Zigotzky <chzigotzky@xxxxxxxxxxx>
- Re: [PATCH 0/6] Binding and driver for "dumb" clock generators
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH v2 2/2] net: stmmac: dwmac-qcom-ethqos: add support for emac4 on qcs9100 platforms
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH 2/3] power: sequenceing: Add power sequence for Amlogic WCN chips
- From: Yang Li <yang.li@xxxxxxxxxxx>
- RE: [PATCH v2 3/4] clk: samsung: clk-pll: Add support for pll_531x
- From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
- RE: [PATCH 2/3] clk: imx95: enable the clock of NETCMIX block control
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v2 2/4] arm64: dts: exynos: add initial CMU clock nodes in Exynos Auto v920
- From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
- RE: [PATCH v2 4/4] clk: samsung: add top clock support for Exynos Auto v920 SoC
- From: "sunyeal.hong" <sunyeal.hong@xxxxxxxxxxx>
- RE: [PATCH 6/6] arm64: dts: imx93: add ddr edac support
- From: Peng Fan <peng.fan@xxxxxxx>
- [PATCH v4] dt-bindings: vendor-prefixes: Add prefix for ieisystem
- From: George Liu <liuxiwei1013@xxxxxxxxx>
- RE: [PATCH 2/3] clk: imx95: enable the clock of NETCMIX block control
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [PATCH v2 1/4] dt-bindings: clock: add Exynos Auto v920 SoC CMU bindings
- From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
- RE: [PATCH v2 3/4] clk: samsung: clk-pll: Add support for pll_531x
- From: "sunyeal.hong" <sunyeal.hong@xxxxxxxxxxx>
- Re: [PATCH v3 1/1] dt-bindings: net: convert enetc to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- RE: [PATCH v2 2/4] arm64: dts: exynos: add initial CMU clock nodes in Exynos Auto v920
- From: "sunyeal.hong" <sunyeal.hong@xxxxxxxxxxx>
- RE: [PATCH v2 1/4] dt-bindings: clock: add Exynos Auto v920 SoC CMU bindings
- From: "sunyeal.hong" <sunyeal.hong@xxxxxxxxxxx>
- RE: [PATCH 2/3] clk: imx95: enable the clock of NETCMIX block control
- From: Wei Fang <wei.fang@xxxxxxx>
- [PATCH v5 2/2] pwm: Add Loongson PWM controller support
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v5 0/2] pwm: Introduce pwm driver for the Loongson family chips
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: pwm: Add Loongson PWM controller
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- RE: [PATCH v2 1/1] dt-bindings: net: convert enetc to yaml
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH v2 2/2] net: stmmac: dwmac-qcom-ethqos: add support for emac4 on qcs9100 platforms
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] PCI: qcom: Add QCS9100 PCIe compatible
- From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
- Re: [PATCH v6 2/2] cpufreq: add virtual-cpufreq driver
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: renesas: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on all RZ boards
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH v6 net-next 2/2] net: airoha: Introduce ethernet support for EN7581 SoC
- From: Andrew Lunn <andrew@xxxxxxx>
- [GIT PULL] Devicetree fixes for v6.10, part 2
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2 6/6] ASoC: codecs: Add NeoFidelity NTP8835 codec
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 5/6] ASoC: dt-bindings: Add bindings for NeoFidelity NTP8835
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 4/6] ASoC: codecs: Add NeoFidelity NTP8918 codec
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 2/6] ASoC: codecs: Add NeoFidelity Firmware helpers
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 0/6] ASoC: Add NTP8918 and NTP8835 codecs support
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 3/6] ASoC: dt-bindings: Add bindings for NeoFidelity NTP8918
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 1/6] dt-bindings: vendor-prefixes: Add NeoFidelity, Inc
- From: Igor Prusov <ivprusov@xxxxxxxxxxxxxxxxx>
- [PATCH v10 6/9] spi: cadence: Add Marvell xfer operation support
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v10 8/9] spi: cadence: Change cs property reading.
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
- [PATCH v10 5/9] spi: cadence: Add Marvell xSPI interrupt changes
- From: Witold Sadowski <wsadowski@xxxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]