From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> Add dts nodes to enable ethernet interface on qcs8300-ride and Rev 2 platforms. The EMAC, SerDes and EPHY version are the same as those in sa8775p. Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> --- This patch series depends on below patch series: https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@xxxxxxxxxxx/ https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@xxxxxxxxxxx/ Changes in v2: - Detect rename and rewrite of changes, and break down changes for easier understanding - Document the difference between qcs8300 ride and revision 2 in commit message - Link to v1: https://lore.kernel.org/r/20241010-dts_qcs8300-v1-0-bf5acf05830b@xxxxxxxxxxx Yijie Yang (5): dt-bindings: arm: qcom: add qcs8300-ride Rev 2 arm64: dts: qcom: qcs8300: add the first 1Gb ethernet arm64: dts: qcom: qcs8300-ride: enable ethernet0 arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi arm64: dts: qcom: qcs8300-ride-r2: add new board file .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts | 33 ++ arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 299 ++---------------- .../{qcs8300-ride.dts => qcs8300-ride.dtsi} | 107 ++++++- arch/arm64/boot/dts/qcom/qcs8300.dtsi | 43 +++ 6 files changed, 212 insertions(+), 272 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts rewrite arch/arm64/boot/dts/qcom/qcs8300-ride.dts (95%) copy arch/arm64/boot/dts/qcom/{qcs8300-ride.dts => qcs8300-ride.dtsi} (78%) base-commit: cea5425829f77e476b03702426f6b3701299b925 -- 2.34.1