Set DW HDMI platform data's output_port to 1 in imx8mp_dw_hdmi_probe() so that dw_hdmi_probe() called by imx8mp_dw_hdmi_probe() can tell the DW HDMI bridge core driver about the output port we are using, hence the next bridge can be found in dw_hdmi_parse_dt() according to the port index, and furthermore the next bridge can be attached to bridge chain in dw_hdmi_bridge_attach() when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is set. The output_port value aligns to the value used by devicetree. This is a preparation for making the i.MX8MP LCDIF driver use drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag. Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c index 8fcc6d18f4ab..54a53f96929a 100644 --- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c @@ -96,6 +96,7 @@ static int imx8mp_dw_hdmi_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(hdmi->pixclk), "Unable to get pixel clock\n"); + plat_data->output_port = 1; plat_data->mode_valid = imx8mp_hdmi_mode_valid; plat_data->phy_ops = &imx8mp_hdmi_phy_ops; plat_data->phy_name = "SAMSUNG HDMI TX PHY"; -- 2.34.1
