On Tue, 15 Oct 2024 11:09:06 +0200 Julien Stephan <jstephan@xxxxxxxxxxxx> wrote: > adaq4370-4 (2MSPS) and adaq4380-4 (4MSPS) are quad-channel precision data > acquisition signal chain μModule solutions compatible with the ad738x > family, with the following differences: > > - configurable gain in front of each 4 adc > - internal reference is 3V derived from refin-supply (5V) Now I'm confused. The earlier refin-supply change appears unused in this patch. I was expecting it to be required for the additional devices. With additions to the docs from the fix to explain the new cases. I'm not seeing that in here. > - additional supplies > > To configure the gain a new patternProperties is added to describe each > channel. It is restricted to adaq devices. > > Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx> > --- > .../devicetree/bindings/iio/adc/adi,ad7380.yaml | 117 +++++++++++++++++++++ > 1 file changed, 117 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > index 74d82721637c..3007d8e39684 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > @@ -25,6 +25,8 @@ description: | > * https://www.analog.com/en/products/ad7386-4.html > * https://www.analog.com/en/products/ad7387-4.html > * https://www.analog.com/en/products/ad7388-4.html > + * https://www.analog.com/en/products/adaq4370-4.html > + * https://www.analog.com/en/products/adaq4380-4.html > > > $ref: /schemas/spi/spi-peripheral-props.yaml# > @@ -46,6 +48,8 @@ properties: > - adi,ad7386-4 > - adi,ad7387-4 > - adi,ad7388-4 > + - adi,adaq4370-4 > + - adi,adaq4380-4 > > reg: > maxItems: 1 > @@ -59,6 +63,9 @@ properties: > vlogic-supply: true > refio-supply: true > refin-supply: true > + vs-p-supply: true > + vs-n-supply: true > + ldo-supply: true > > aina-supply: > description: > @@ -86,12 +93,43 @@ properties: > specify the ALERT interrupt. > maxItems: 1 > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > required: > - compatible > - reg > - vcc-supply > - vlogic-supply > > +patternProperties: > + "^channel@([0-3])$": > + $ref: adc.yaml > + type: object > + > + properties: > + reg: > + description: > + The channel number. From 0 to 3 corresponding to channels A,B,C,D > + items: > + minimum: 0 > + maximum: 3 > + > + adi,gain-milli: > + description: > + The hardware gain applied to the ADC input (in milli units). > + If not present, default to 1000 (no actual gain applied). > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 1000 > + > + required: > + - reg > + > + additionalProperties: false > + > unevaluatedProperties: false > > allOf: > @@ -128,7 +166,21 @@ allOf: > ainc-supply: false > aind-supply: false > > + # Using channel to declare gain property only applies to adaq devices > + - if: > + properties: > + compatible: > + not: > + contains: > + enum: > + - adi,adaq4370-4 > + - adi,adaq4380-4 > + then: > + patternProperties: > + "^channel@([0-3])$": false > + > # ad7380-4 uses refin-supply as external reference. > + # adaq devices use internal reference only, derived from refin-supply > # All other chips from ad738x family use refio as optional external reference. > # When refio-supply is omitted, internal reference is used. > - if: > @@ -136,6 +188,8 @@ allOf: > compatible: > enum: > - adi,ad7380-4 > + - adi,adaq4370-4 > + - adi,adaq4380-4 > then: > properties: > refio-supply: false > @@ -145,6 +199,24 @@ allOf: > properties: > refin-supply: false > > + # adaq devices need more supplies > + - if: > + properties: > + compatible: > + enum: > + - adi,adaq4370-4 > + - adi,adaq4380-4 > + then: > + required: > + - vs-p-supply > + - vs-n-supply > + - ldo-supply > + else: > + properties: > + vs-p-supply: false > + vs-n-supply: false > + ldo-supply: false > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > @@ -169,3 +241,48 @@ examples: > refio-supply = <&supply_2_5V>; > }; > }; > + > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,adaq4380-4"; > + reg = <0>; > + > + spi-cpol; > + spi-cpha; > + spi-max-frequency = <80000000>; > + > + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpio0>; > + > + vcc-supply = <&supply_3_3V>; > + vlogic-supply = <&supply_3_3V>; > + refin-supply = <&supply_5V>; > + vs-p-supply = <&supply_5V>; > + vs-n-supply = <&supply_0V>; > + ldo-supply = <&supply_5V>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { > + reg = <0>; > + adi,gain-milli = <300>; > + }; > + > + channel@2 { > + reg = <2>; > + adi,gain-milli = <600>; > + }; > + > + channel@3 { > + reg = <3>; > + adi,gain-milli = <1000>; > + }; > + }; > + }; >
