回复: 回复: [PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Conor

> On Thu, Oct 17, 2024 at 05:49:56AM +0000, Changhuang Liang wrote:
> > Hi, Conor,
> >
> > > Hi, Conor
> > >
> > > Thanks for your patch.
> > >
> > > > From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > > >
> > > > Aurelien reported probe failures due to the csi node being enabled
> > > > without having a camera attached to it. A camera was in the
> > > > initial submissions, but was removed from the dts, as it had not
> > > > actually been present on the board, but was from an addon board
> > > > used by the developer
> > > of the relevant drivers.
> > > > The non-camera pipeline nodes were not disabled when this happened
> > > > and the probe failures are problematic for Debian. Disable them.
> > > >
> > > > CC: stable@xxxxxxxxxxxxxxx
> > > > Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera
> > > > subsystem
> > > > nodes")
> > >
> > > Here you write it in 13 characters, should be "Fixes: 28ecaaa5af19 ..."
> > >
> >
> > After fixing this:
> > Reviewed-by: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
> 
> Ye, I know it was 13 not 12. I don't think that's a problem though.

Okay, that's fine.

Best Regards,
Changhuang




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux