Hello,
2024年10月15日(火) 19:52 Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>:
>
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
>
> Add a RTC driver for NXP S32G2/S32G3 SoCs.
>
> The RTC module is used to enable Suspend to RAM (STR) support
> on NXP S32G2/S32G3 SoC based boards.
> RTC tracks clock time during system suspend.
>
> RTC from S32G2/S32G3 is not battery-powered and it is not
> kept alive during system reset.
>
> Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx>
> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx>
> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-s32g.c | 778 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 790 insertions(+)
> create mode 100644 drivers/rtc/rtc-s32g.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index e87c3d74565c..18fc3577f6cd 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -2054,4 +2054,15 @@ config RTC_DRV_SSD202D
> This driver can also be built as a module, if so, the module
> will be called "rtc-ssd20xd".
>
> +config RTC_DRV_S32G
> + tristate "RTC driver for S32G2/S32G3 SoCs"
> + depends on ARCH_S32 || COMPILE_TEST
> + depends on COMMON_CLK
> + help
> + Say yes to enable RTC driver for platforms based on the
> + S32G2/S32G3 SoC family.
> +
> + This RTC module can be used as a wakeup source.
> + Please note that it is not battery-powered.
> +
> endif # RTC_CLASS
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 8ee79cb18322..a63d010a753c 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -158,6 +158,7 @@ obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
> obj-$(CONFIG_RTC_DRV_RX8111) += rtc-rx8111.o
> obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
> obj-$(CONFIG_RTC_DRV_RZN1) += rtc-rzn1.o
> +obj-$(CONFIG_RTC_DRV_S32G) += rtc-s32g.o
> obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
> obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
> obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o
> diff --git a/drivers/rtc/rtc-s32g.c b/drivers/rtc/rtc-s32g.c
> new file mode 100644
> index 000000000000..d6502d8bf616
> --- /dev/null
> +++ b/drivers/rtc/rtc-s32g.c
[...]
> +enum {
> + DIV1 = 1,
> + DIV32 = 32,
> + DIV512 = 512,
> + DIV512_32 = 16384
> +};
> +
> +struct rtc_time_base {
> + s64 sec;
> + u64 cycles;
> + u64 rollovers;
> + struct rtc_time tm;
> +};
> +
> +struct rtc_priv {
> + struct rtc_device *rdev;
> + struct device *dev;
You don't have to have 'struct device' here. You can refer to 'struct
device' from
member variable dev.parent of 'struct rtc_device'.
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org / kernel.org}
GPG ID: 32247FBB40AD1FA6
