Add LMH interrupts support to indicate if there is any
thermal throttle.
Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 47eca50b30ffa38a652706014d35ef9e833003ec..bd86bc2cb6c304aa0b4000f3226639bef57a9b9a 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -4005,6 +4005,10 @@ cpufreq_hw: cpufreq@18591000 {
<0x0 0x18593000 0x0 0x1000>;
reg-names = "freq-domain0", "freq-domain1";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
--
2.34.1
