On 10/18/2024, Marek Vasut wrote:
> On 10/18/24 8:48 AM, Liu Ying wrote:
>> Add a HDMI connector to connect with i.MX8MP HDMI TX output.
>> This is a preparation for making the i.MX8MP LCDIF driver use
>> drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
>> flag. With that flag, the DW HDMI bridge core driver would
>> try to attach the next bridge which is the HDMI connector.
>>
>> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
>> ---
>> .../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>> index 83194ea7cb81..b776646a258a 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>> @@ -15,6 +15,17 @@ / {
>> "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>> "fsl,imx8mp";
>> + hdmi-connector {
>> + compatible = "hdmi-connector";
>> + type = "a";
> Shouldn't this also have a 'label' property ?
'label' property is not required by hdmi-connector.yaml and there
are in-tree hdmi-connector nodes that haven't got it.
I tried to find schematics for the board online, but failed.
I don't have the board to see the label printed in silk layer, either.
If anyone can provide a valid label name, I may add it.
--
Regards,
Liu Ying
