Linux Device Tree
[Prev Page][Next Page]
- Re: [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
- From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: gpio: gpio-pca9570: Add label property
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH] dt-bindings: gpio: mvebu: Fix "unevaluatedProperties" to be false
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 1/2] driver: core: add dedicated workqueue for devlink removal
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v13 20/53] ASoC: Add SOC USB APIs for adding an USB backend
- From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
- Re: [PATCH V8 02/12] phy: freescale: add Samsung HDMI PHY
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1298: Add driver
- From: Mike Looijmans <mike.looijmans@xxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 5/8] ARM: dts: microchip: sama5d27_wlsom1_ek: Add power-supply property for sdmmc0 node
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH v2 4/8] ARM: dts: microchip: sama5d27_wlsom1: Add power-supply property for sdmmc1 node
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- Re: [PATCH v4 3/6] soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 3/8] ARM: dts: microchip: sama5d27_som1_ek: Add power-supply properties for sdmmc nodes
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH v2 2/8] ARM: dts: microchip: sam9x60ek: Add power-supply properties for sdmmc nodes
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH v2 1/8] ARM: dts: microchip: sam9x60_curiosity: Add power-supply properties for sdmmc nodes
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 0/8] Add power-supply properties for sdmmc nodes on Microchip boards
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH v2 7/8] ARM: dts: microchip: sama5d2_icp: Add power-supply property for sdmmc0 node
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH v2 8/8] ARM: dts: microchip: sama5d2_xplained: Add power-supply property for sdmmc0 node
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- [PATCH v2 6/8] ARM: dts: microchip: sama5d29_curiosity: Add power-supply properties for sdmmc nodes
- From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: arm: qcom: drop the superfluous device compatibility schema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 0/4] riscv: sophgo: add reset support for SG2042
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 2/2] dt-bindings: power: supply: st,stc3117
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH V4 1/2] dt-bindings: pwm: Add pwm-gpio
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] serial: samsung: honor fifosize from dts at first
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH V8 11/12] arm64: dts: imx8mp: add HDMI display pipeline
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH V8 06/12] arm64: dts: imx8mp: add HDMI irqsteer
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH V8 05/12] arm64: dts: imx8mp: add HDMI power-domains
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH v1] arm64: dts: imx8mp-verdin: Label ldo5 and link to usdhc2
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH v7 0/2] Add Variscite VAR-SOM-MX93 support
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH V4 2/2] pwm: Add GPIO PWM driver
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH V4 0/2] pwm: Add GPIO PWM driver
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH V4 1/4] firmware: xilinx: Add ZynqMP efuse access API
- From: Michal Simek <michal.simek@xxxxxxx>
- Re: [PATCH v13 1/3] dt-bindings: hwmon: fan: Add fan binding to schema
- From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: clock: s32g: add uSDHC clock IDs
- From: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxxxxxx>
- Re: [PATCH v3 4/4] ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH v3 8/8] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH V4 2/2] pwm: Add GPIO PWM driver
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH V4 1/2] dt-bindings: pwm: Add pwm-gpio
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH V4 0/2] pwm: Add GPIO PWM driver
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH] ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- [PATCH v2 2/2] of: property: use unsigned int return on of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH v2 1/2] of: property: add missing kerneldoc for of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH v2 0/2] of: property: cleanup of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 00/13] of: property: add port base loop
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
- From: Steev Klimaszewski <steev@xxxxxxxx>
- [PATCH] MAINTAINERS: Add entry for Samsung MFC DT Schema
- From: Aakarsh Jain <aakarsh.jain@xxxxxxxxxxx>
- [PATCH v3 2/2] dt-bindings: power: supply: st,stc3117
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v3 1/2] power: supply: Add STC3117 fuel gauge unit driver
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property
- From: Jie Luo <quic_luoj@xxxxxxxxxxx>
- [PATCH v4 3/3] clocksource/drivers/imx-sysctr: support i.MX95
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 2/3] clocksource/drivers/imx-sysctr: drop use global variables
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: timer: nxp,sysctr-timer: support i.MX95
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 0/3] clocksource: imx-sysctr: support i.MX95
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: imx8mm-evk: Add PDM micphone sound card support
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v2 2/2] arm64: dts: imx8mn-evk: Add PDM micphone sound card support
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH] of: Make explicit cpu_to_be32 conversion to mute sparse warning
- From: Dawei Li <dawei.li@xxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: imx8mm-evk: Add PDM micphone sound card support
- From: "S.J. Wang" <shengjiu.wang@xxxxxxx>
- Re: [PATCH v5 8/8] usb: chipidea: ci_hdrc_imx: align usb wakeup clock name with dt-bindings
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
- From: Satya Durga Srinivasu Prabhala <quic_satyap@xxxxxxxxxxx>
- Re: [PATCH 2/2] of: property: use unsigned int return on of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH 1/2] of: property: add missing kerneldoc for of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: imx8mm-evk: Add PDM micphone sound card support
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH v1] arm64: dts: rockchip: rk3328: Drop interrupts property from pwm-rockchip nodes
- From: Johan Jonker <jbx6244@xxxxxxxxx>
- Re: [PATCH V4 2/2] pwm: Add GPIO PWM driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V4 1/2] dt-bindings: pwm: Add pwm-gpio
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH V4 2/2] pwm: Add GPIO PWM driver
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V4 1/2] dt-bindings: pwm: Add pwm-gpio
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V4 0/2] pwm: Add GPIO PWM driver
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v4 03/12] dt-bindings: mtd: brcmnand: Add ecc strap property
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: rk3588: remove redundant cd-gpios in sdmmc node
- From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
- Re: [EXTERNAL] [PATCH v4 05/15] soc: qcom: ice: support for hardware wrapped keys
- From: Kamlesh Gurudasani <kamlesh@xxxxxx>
- Re: [PATCH V3 0/2] pwm: Add GPIO PWM driver
- From: Phil Howard <phil@xxxxxxxxxxxxx>
- Re: [RFC 1/9] of: provide a cleanup helper for OF nodes
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 0/6] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [EXTERNAL] [PATCH v4 04/15] soc: qcom: ice: add hwkm support in ice
- From: Kamlesh Gurudasani <kamlesh@xxxxxx>
- Re: [PATCH 2/2] regulator: gpio: Correct default GPIO state to LOW
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 2/2] leds: qcom-lpg: Add PM660L configuration and compatible
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- Re: [PATCH v7 00/39] ep93xx device tree conversion
- From: andy.shevchenko@xxxxxxxxx
- [PATCH] dt-bindings: arm: qcom: drop the superfluous device compatibility schema
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v8 0/7] iio: add new backend framework
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1298: Add driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v8 5/7] iio: add the IIO backend framework
- From: andy.shevchenko@xxxxxxxxx
- Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v8 0/7] iio: add new backend framework
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v8 3/7] of: property: add device link support for io-backends
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V8 06/12] arm64: dts: imx8mp: add HDMI irqsteer
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH v8 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- RE: [EXT] Re: [PATCH v12 4/7] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
- From: Sandor Yu <sandor.yu@xxxxxxx>
- RE: [EXT] Re: [PATCH v12 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ
- From: Sandor Yu <sandor.yu@xxxxxxx>
- Re: [PATCH v5 3/3] iio: light: Add support for APDS9306 Light Sensor
- From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 3/3] iio: light: Add support for APDS9306 Light Sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti-ads1298: Add driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti-ads1298: Add driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/4] iio: adc: ad7192: Add AD7194 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V8 06/12] arm64: dts: imx8mp: add HDMI irqsteer
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible
- From: Simon Glass <sjg@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v2 1/4] arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v5 3/3] iio: light: Add support for APDS9306 Light Sensor
- From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
- Re: [PATCH v4 4/4] arm64: dts: rockchip: Add devicetree for Pine64 PineTab2
- From: Dang Huynh <danct12@xxxxxxxxxx>
- Re: (subset) [PATCH v4 0/4] arm64: rockchip: Pine64 PineTab2 support
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH v13 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v13 6/7] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v13 5/7] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v13 4/7] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v13 3/7] dt-bindings: display: bridge: Add Cadence MHDP8501
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v13 2/7] phy: Add HDMI configuration options
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v13 1/7] drm: bridge: Cadence: Create mhdp helper driver
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: cpufreq: add virtual cpufreq device
- From: Marc Zyngier <maz@xxxxxxxxxx>
- [PATCH v13 0/7] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v2 2/2] arm64: dts: allwinner: h618: add BananaPi M4 Berry board
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH v2 1/2] dt-bindings: arm: sunxi: document BananaPi M4 Berry board name
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH v2 0/2] arm64: dts: allwinner: Add BananaPi M4 Berry
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property
- From: Jie Luo <quic_luoj@xxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: allwinner: Add Jide Remix Mini PC support
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH 2/3] dt-bindings: arm: sunxi: document Remix Mini PC name
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH 1/3] dt-bindings: vendor-prefixes: add Jide
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH 0/3] arm64: dts: allwinner: Add Remix Mini PC support
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH 1/2] arm64: dts: allwinner: h616: Add 32K fanout pin
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH 2/2] arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH 0/2] arm64: dts: allwinner: Add Transpeed WiFi nodes
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
- From: kernel test robot <lkp@xxxxxxxxx>
- RE: [PATCH v3 0/6] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH V8 02/12] phy: freescale: add Samsung HDMI PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] of: property: use unsigned int return on of_graph_get_endpoint_count()
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] of: property: add missing kerneldoc for of_graph_get_endpoint_count()
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2] dt-bindings: mfd: syscon: Add ti,j784s4-pcie-ctrl compatible
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH 2/3] dt-bindings: fpga: xlnx,fpga-slave-selectmap: add DT schema
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] fpga: xilinx-spi: extract a common driver core
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] fpga: xilinx-selectmap: add new driver
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- RE: [PATCH v8 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
- From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
- RE: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Xu Yang <xu.yang_2@xxxxxxx>
- RE: [EXT] Re: [PATCH v5 2/8] arm64: dts: imx8ulp: add usb nodes
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v3 2/2] media: i2c: Add GC08A3 image sensor driver
- From: Zhi Mao (毛智) <zhi.mao@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] media: dt-bindings: media: i2c: Document GC08A3 bindings
- From: Zhi Mao (毛智) <zhi.mao@xxxxxxxxxxxx>
- Re: [PATCH 2/2] phy: add driver for MediaTek XFI T-PHY
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- [PATCH v4 2/2] media: i2c: Add GC08A3 image sensor driver
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- [PATCH v4 1/2] media: dt-bindings: i2c: add GalaxyCore GC08A3 image sensor
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- [PATCH v4 0/2] media: i2c: Add support for GC08A3 sensor
- From: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: mtu3: Add MT8195 MTU3 ip-sleep wakeup support
- From: Chunfeng Yun (云春峰) <Chunfeng.Yun@xxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH v7 09/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 10/10] coresight-tpdm: Add msr register support for CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 08/10] coresight-tpdm: Add timestamp control register support for the CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 07/10] coresight-tpdm: Add pattern registers support for CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 06/10] coresight-tpdm: Add support to configure CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 05/10] coresight-tpda: Add support to configure CMB element
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 04/10] coresight-tpdm: Add CMB dataset support
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 03/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 00/10] Add support to configure TPDM CMB subunit
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v7 01/10] coresight-tpdm: Optimize the store function of tpdm simple dataset
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v8 2/2] rtc: sophgo: add rtc support for Sophgo CV1800 SoC
- From: Jingbao Qiu <qiujingbao.dlmu@xxxxxxxxx>
- [PATCH v8 1/2] dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC
- From: Jingbao Qiu <qiujingbao.dlmu@xxxxxxxxx>
- [PATCH v8 0/2] riscv: rtc: sophgo: add rtc support for CV1800
- From: Jingbao Qiu <qiujingbao.dlmu@xxxxxxxxx>
- 回复: 回复: 回复: [v2] riscv: dts: starfive: jh7110: Add camera subsystem nodes
- From: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] firmware: imx: support BBM module
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 1/2] drivers: rtc: add max313xx series rtc driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Define "i2c-parent" constraints
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 02/13] dt-bindings: treewide: add access-controllers description
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2 4/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: enable touchscreen
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v2 3/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: move pinctrl to appropriate nodes
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v2 5/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set touchpad i2c frequency to 1 MHz
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH v2 5/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set touchpad i2c frequency to 1 MHz
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH v2 6/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: Allow UFS regulators load/mode setting
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH v2 4/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: enable touchscreen
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH v2 3/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: move pinctrl to appropriate nodes
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH v2 2/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set names for i2c hid nodes
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH v2 0/6] Device-tree improvements for Lenovo Flex/Yoga 5G laptop
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH v2 1/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: fix GPU firmware path
- From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
- [PATCH 2/2] leds: Add NCP5623 multi-led driver
- From: Abdel Alkuor <alkuor@xxxxxxxxx>
- [PATCH 1/2] dt: bindings: leds: Add NCP5623 multi-LED Controller
- From: Abdel Alkuor <alkuor@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sm6115: Fix missing interconnect-names
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: gpio: renesas,rcar-gpio: Add r8a779h0 support
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH V8 02/12] phy: freescale: add Samsung HDMI PHY
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: qcm6490-idp: Include PM7250B
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH RESEND v6] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v3 0/2] arm64: qcom: sm8650: add support for USB-C Altmode
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sm8550-qrd: enable Touchscreen
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 1/8] ARM: dts: microchip: sam9x60_curiosity: Add power-supply properties for sdmmc nodes
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH V8 12/12] arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 11/12] arm64: dts: imx8mp: add HDMI display pipeline
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 09/12] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 08/12] drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 07/12] dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 06/12] arm64: dts: imx8mp: add HDMI irqsteer
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 05/12] arm64: dts: imx8mp: add HDMI power-domains
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 04/12] pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 03/12] dt-bindings: soc: imx: add missing clock and power-domains to imx8mp-hdmi-blk-ctrl
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 02/12] phy: freescale: add Samsung HDMI PHY
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 01/12] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH V8 00/12] soc: imx8mp: Add support for HDMI
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH net-next 1/3] net: macb: queue tie-off or disable during WOL suspend
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts
- From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
- Re: [PATCH v13 1/3] dt-bindings: hwmon: fan: Add fan binding to schema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: hwmon: fan: Add fan binding to schema
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 3/3] hwmon: Driver for Nuvoton NCT7363Y
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v8 2/3] pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v4 02/12] dt-bindings: mtd: brcmnand: Add WP pin connection property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 03/12] dt-bindings: mtd: brcmnand: Add ecc strap property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/3] drm/bridge: add lvds controller support for sam9x7
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH 00/23] TQMa7x/MBa7x DT fixes
- From: Shawn Guo <shawn.gsc@xxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- [PATCH v2 0/2] arm64: dts: allwinner: h618: Add Sipeed Longan SoM 3H and Pi 3H board
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- [PATCH v4 3/3] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v4 1/3] iio: imu: st_lsm6dsx: improve kernel docs and comments
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support to ASM330LHHXG1
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH v4 0/3] add support for ASM330LHHXG1
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH v6 1/2] drivers: rtc: add max313xx series rtc driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
- From: Chukun Pan <amadeus@xxxxxxxxxx>
- Re: [PATCH v3 7/7] of: Add KUnit test to confirm DTB is loaded
- From: David Gow <davidgow@xxxxxxxxxx>
- [PATCH v3 3/4] ASoc: PCM6240: Add compile item for PCM6240 Family driver
- From: Shenghao Ding <shenghao-ding@xxxxxx>
- [PATCH v3 1/4] ASoc: PCM6240: Create PCM6240 Family driver code
- From: Shenghao Ding <shenghao-ding@xxxxxx>
- [PATCH v3 2/4] ASoc: PCM6240: Create header file for PCM6240 Family driver code
- From: Shenghao Ding <shenghao-ding@xxxxxx>
- [PATCH v3 4/4] ASoc: dt-bindings: PCM6240: Add initial DT binding
- From: Shenghao Ding <shenghao-ding@xxxxxx>
- Re: [PATCH] dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v13 41/53] ASoC: Introduce SND kcontrols to select sound card and PCM device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 36/53] ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 52/53] ASoC: qcom: Populate SoC components string
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 33/53] ASoC: usb: Add PCM format check API for USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 03/53] xhci: Add interrupt pending autoclear flag to each interrupter
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 05/53] xhci: make isoc_bei_interval variable interrupter specific.
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 06/53] xhci: remove unnecessary event_ring_deq parameter from xhci_handle_event()
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 47/53] ASoC: usb: Fetch ASoC sound card information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 17/53] usb: host: xhci-sideband: Expose a sideband interrupter enable API
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 44/53] ASoC: qcom: qdsp6: Add PCM ops to track current state
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 31/53] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 22/53] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 30/53] ALSA: usb-audio: qcom: Add USB QMI definitions
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 53/53] ASoC: doc: Add documentation for SOC USB
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 12/53] xhci: add helper to stop endpoint and wait for completion
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 49/53] ALSA: usb-audio: qcom: Use card and PCM index from QMI request
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 46/53] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 16/53] xhci: sideband: add initial api to register a sideband entity
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 15/53] xhci: export XHCI IMOD setting helper for interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 24/53] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 51/53] ASoC: usb: Rediscover USB SND devices on USB port add
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 37/53] ASoC: dt-bindings: Add Q6USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 14/53] usb: host: xhci: Repurpose event handler for skipping interrupter events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 00/53] Introduce QC USB SND audio offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 11/53] xhci: Decouple handling an event from checking for unhandled events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 42/53] ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 08/53] xhci: move event processing for one interrupter to a separate function
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 39/53] ALSA: usb-audio: qcom: Populate PCM and USB chip information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 02/53] xhci: fix off by one check when adding a secondary interrupter.
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 38/53] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 20/53] ASoC: Add SOC USB APIs for adding an USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 43/53] ASoC: Add SND kcontrol for fetching USB offload status
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 18/53] usb: host: xhci-mem: Cleanup pending secondary event ring events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 40/53] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 07/53] xhci: update event ring dequeue pointer position to controller correctly
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 28/53] usb: dwc3: Specify maximum number of XHCI interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 50/53] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 25/53] ALSA: usb-audio: Introduce USB SND platform op callbacks
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 09/53] xhci: add helper that checks for unhandled events on a event ring
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 34/53] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 10/53] xhci: Don't check if the event ring is valid before every event TRB
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 29/53] usb: host: xhci-plat: Set XHCI max interrupters if property is present
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 19/53] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 26/53] ALSA: usb-audio: Export USB SND APIs for modules
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 13/53] usb: host: xhci: Export enable and disable interrupter APIs
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 45/53] ASoC: usb: Create SOC USB SND jack kcontrol
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 21/53] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 27/53] ALSA: usb-audio: Save UAC sample size information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 23/53] ASoC: qdsp6: q6afe: Increase APR timeout
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 04/53] xhci: Add helper to set an interrupters interrupt moderation interval
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v13 01/53] xhci: fix possible null pointer dereference at secondary interrupter removal
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
- From: Tamseel Shams <m.shams@xxxxxxxxxxx>
- [PATCH 1/2] serial: samsung: honor fifosize from dts at first
- From: Tamseel Shams <m.shams@xxxxxxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH v4 05/12] arm64: dts: broadcom: bcmbca: Add NAND controller node
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- [PATCH v4 06/12] arm64: dts: broadcom: bcmbca: Update router boards
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- [PATCH v4 04/12] ARM: dts: broadcom: bcmbca: Add NAND controller node
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- [PATCH v4 02/12] dt-bindings: mtd: brcmnand: Add WP pin connection property
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- [PATCH v4 03/12] dt-bindings: mtd: brcmnand: Add ecc strap property
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- [PATCH v4 01/12] dt-bindings: mtd: brcmnand: Updates for bcmbca SoCs
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- [PATCH v4 00/12] dt-bindings: mtd: brcmnand: Updates for bcmbca SoCs
- From: William Zhang <william.zhang@xxxxxxxxxxxx>
- Re: [PATCH 2/2] regulator: gpio: Correct default GPIO state to LOW
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH v6 8/8] tty: i3c: add TTY over I3C master support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 6/8] i3c: target: func: add tty driver
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 5/8] i3c: target: add svc target controller support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 3/8] Documentation: i3c: Add I3C target mode controller and function
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 2/8] dt-bindings: i3c: svc: add proptery mode
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 1/8] i3c: add target mode support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 0/8] I3C target mode support
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 5/6] dt-bindings: PCI: dwc: Add 'msg' register region
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- [PATCH] dt-bindings: pinctrl: nvidia,tegra234-pinmux: Restructure common schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/4] Add 8qm SMMU information
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH] dt-bindings: gpio: mvebu: Fix "unevaluatedProperties" to be false
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] media: dt-bindings: techwell,tw9900: Fix port schema ref
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v7 1/5] dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
- From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
- Re: [PATCH v8 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: visionox-rm69299: Update maintainers
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH] dt-bindings: visionox-rm69299: Update maintainers
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 1/8] i3c: add target mode support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 01/10] dt-bindings: iommu: Add Translation Buffer Unit bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: media: Add sram-size Property for Wave5
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 3/3] Input: Add TouchNetix axiom i2c touchscreen driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [net-next PATCH v5 1/9] dt-bindings: net: document ethernet PHY package nodes
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 0/3] fpga: xilinx-selectmap: add new driver
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- Re: [net-next PATCH v5 1/9] dt-bindings: net: document ethernet PHY package nodes
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: trivial-devices: sort entries alphanumerically
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: gpio: gpio-pca9570: Add label property
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
- From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: trivial-devices: sort entries alphanumerically
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 0/3] fpga: xilinx-selectmap: add new driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/4] arm64: dts: rockchip: enable temperature driven fan control on Rock 5B
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH V3 0/2] pwm: Add GPIO PWM driver
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: mmp-dma: convert to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5] dt-bindings: misc: xlnx,sd-fec: convert bindings to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3 7/7] of: Add KUnit test to confirm DTB is loaded
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 6/7] of: unittest: treat missing of_root as error instead of fixing up
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 5/7] arm64: Unconditionally call unflatten_device_tree()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 4/7] x86/of: Unconditionally call unflatten_and_copy_device_tree()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 3/7] um: Unconditionally call unflatten_device_tree()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 2/7] of: Create of_root if no dtb provided by firmware
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 1/7] of: Always unflatten in unflatten_and_copy_device_tree()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- [PATCH v3 0/7] of: populate of_root node if bootloader doesn't
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 4/4] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: fpga: xlnx,fpga-slave-selectmap: add DT schema
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 03/18] dt-bindings: pinctrl: allow pin controller device without unit address
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: arm: ti: Update maintainers list
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 2/2] dt-bindings: arm: Add device-name in the coresight components
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH AUTOSEL 6.7 20/23] ARM: dts: Fix TPM schema violations
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v5 3/3] w1: add UART w1 bus driver
- From: Christoph Winklhofer <cj.winklhofer@xxxxxxxxx>
- Re: [PATCH v7 1/5] dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 3/3] hwmon: Add driver for Astera Labs PT5161L retimer
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v6 4/5] dt-bindings: hwmon: Add Amphenol ChipCap 2
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: trivial-devices: add Astera Labs PT5161L
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 0/4] Add 8qm SMMU information
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: vendor-prefixes: add asteralabs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v6 5/5] hwmon: Add support for Amphenol ChipCap 2
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v6 3/5] ABI: sysfs-class-hwmon: add descriptions for humidity min/max alarms
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v6 2/5] hwmon: (core) Add support for humidity min/max alarm
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v6 1/5] dt-bindings: vendor-prefixes: add Amphenol
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
- [PATCH AUTOSEL 6.6 19/21] ARM: dts: Fix TPM schema violations
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.7 20/23] ARM: dts: Fix TPM schema violations
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH v4 10/10] clk: qcom: Add camcc clock driver for x1e80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 09/10] clk: qcom: Add TCSR clock driver for x1e80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 07/10] clk: qcom: Add dispcc clock driver for x1e80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 08/10] clk: qcom: Add GPU clock driver for x1e80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 06/10] clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 05/10] dt-bindings: clock: qcom: Document the X1E80100 Camera Clock Controller
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 04/10] dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock Controller
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 03/10] dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 02/10] dt-bindings: clock: qcom: Document the X1E80100 Display Clock Controller
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 01/10] dt-bindings: clock: Drop the SM8650 DISPCC dedicated schema
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v4 00/10] clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 2/2] PCI: qcom: Add X1E80100 PCIe support
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v3 0/2] PCI: qcom: Add PCIe support for X1E80100
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH] dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address
- From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
- Re: [PATCH 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] dt-bindings: net: bluetooth: qualcomm: Fix bouncing @codeaurora
- From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
- [PATCH] dt-bindings: visionox-rm69299: Update maintainers
- From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
- [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
- From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
- Re: [PATCH v3 08/24] hwtracing: switch to use of_graph_get_next_device_endpoint()
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- [PATCH v7 3/5] remoteproc: k3: Move out functions common with M4 driver
- From: Hari Nagalla <hnagalla@xxxxxx>
- Re: [PATCH v3 06/24] media: platform: switch to use of_graph_get_next_device_endpoint()
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v7 4/5] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v7 1/5] dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v7 5/5] arm64: defconfig: Enable TI K3 M4 remote proc driver
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v7 2/5] remoteproc: k3: Move out data structures common with M4 driver
- From: Hari Nagalla <hnagalla@xxxxxx>
- [PATCH v7 0/5] TI K3 M4F support on AM64x and AM62x SoCs
- From: Hari Nagalla <hnagalla@xxxxxx>
- Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
- From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
- Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH] ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora
- From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
- Re: [PATCH 2/2] regulator: gpio: Correct default GPIO state to LOW
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 10/10] mtd: rawnand: brcmnand: allow for on-die ecc
- From: David Regan <dregan@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
- From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
- Re: [PATCH v3 2/6] dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v8 2/3] pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
- From: Brandon Cheo Fusi <fusibrandon13@xxxxxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/8] i3c: add target mode support
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
- From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v4 4/5] arm64: dts: add description for solidrun am642 som and evaluation board
- From: Andrew Davis <afd@xxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 03/12] power: reset: Add TI-SCI reboot driver
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: ti: k3-am642-evm: add overlay for icssg1 2nd port
- From: "Anwar, Md Danish" <a0501179@xxxxxx>
- Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: 回复: 回复: [v2] riscv: dts: starfive: jh7110: Add camera subsystem nodes
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 2/3] arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support
- From: "Anwar, Md Danish" <a0501179@xxxxxx>
- Re: Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v4] regulator: dt-bindings: microchip,mcp16502: convert to YAML
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 8/8] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v8 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/2] phy: add driver for MediaTek XFI T-PHY
- From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] arm64: Unconditionally call unflatten_device_tree()
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: Add regulator-compatible property
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v4 4/5] arm64: dts: add description for solidrun am642 som and evaluation board
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v4 5/5] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v4 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v4 0/5] arm64: dts: add description for solidrun am642 som and hummingboard evb
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v4 3/5] arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v4 1/5] dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: media: Add sram-size Property for Wave5
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] driver: core: add dedicated workqueue for devlink removal
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: media: Add sram-size Property for Wave5
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v3 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: cpufreq: add virtual cpufreq device
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 4/4] arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2 3/4] arm64: dts: qcom: pm4125: define USB-C related blocks
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v3 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 00/46] Dynamic allocation of reserved_mem array.
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v3 6/6] PCI: dwc: Add common send PME_Turn_Off message method
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 5/6] dt-bindings: PCI: dwc: Add 'msg' register region
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 4/6] PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 3/6] PCI: dwc: Add outbound MSG TLPs support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 2/6] PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 1/6] PCI: Add INTx Mechanism Messages macros
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 0/6] PCI: dwc: Add common pme_turn_off message by using outbound iATU
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 5/7] iio: add the IIO backend framework
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 7/7] iio: adc: adi-axi-adc: move to backend framework
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 6/7] iio: adc: ad9467: convert to backend framework
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 2/7] dt-bindings: adc: axi-adc: update bindings for backend framework
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 3/7] of: property: add device link support for io-backends
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 1/7] dt-bindings: adc: ad9467: add new io-backend property
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 0/7] iio: add new backend framework
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v8 4/7] iio: buffer-dmaengine: export buffer alloc and free functions
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v3 2/2] watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v3 1/2] soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v3 0/2] Add regmap support to exynos-pmu for protected PMU regs
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/4] arm64: dts: rockchip: enable temperature driven fan control on Rock 5B
- From: Alexey Charkov <alchark@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 4/4] iio: adc: ad7192: Add AD7194 support
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v3 4/5] arm64: dts: add description for solidrun am642 som and evaluation board
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v3 2/5] dt-bindings: rtc: abx80x: convert to yaml
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v3 0/5] arm64: dts: add description for solidrun am642 som and hummingboard evb
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v3 5/5] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v3 3/5] arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- [PATCH v3 1/5] dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: media: Add sram-size Property for Wave5
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 2/3] arm64: dts: qcom: Add initial support for rb5gen2 SOM
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH 0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- Re: [RFC PATCH 2/5] mfd: add 88pm88x driver
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: gpio: renesas,rcar-gpio: Add r8a779h0 support
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 2/2] phy: add driver for MediaTek XFI T-PHY
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH V3 0/2] pwm: Add GPIO PWM driver
- From: Phil Howard <phil@xxxxxxxxxxxxx>
- Re: [PATCH V2 2/2] phy: freescale: add Samsung HDMI PHY
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH v3] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [RFC 9/9] PCI/pwrctl: add a PCI power control driver for power sequenced devices
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 00/17] kexec: Allow preservation of ftrace buffers
- From: Alexander Graf <graf@xxxxxxxxxx>
- Re: [RFC PATCH 2/5] mfd: add 88pm88x driver
- From: "Karel Balej" <karelb@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: media: Add sram-size Property for Wave5
- From: Nishanth Menon <nm@xxxxxx>
- Re: [RFC PATCH 2/5] mfd: add 88pm88x driver
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: ti: k3-am642-evm: add overlay for icssg1 2nd port
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH RFC 2/2] arm64: dts: qcom: msm8953: Add GPU
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH net-next] dt-bindings: net: ti: Update maintainers list
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH RFC 1/2] arm64: dts: qcom: msm8953: Add GPU IOMMU
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 2/2] of: dynamic: flush devlinks workqueue before destroying the changeset
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH 1/2] driver: core: add dedicated workqueue for devlink removal
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH 0/2] fix DT overlays when device links are released
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- Re: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID
- From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: Add regulator-compatible property
- From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V4 4/4] MAINTAINERS: Add maintainers for ZynqMP NVMEM driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v2 0/2] MediaTek: Introduce MT8395 Radxa NIO 12L devicetree
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH V4 2/4] nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup
- From: Praveen Teja Kundanala <praveen.teja.kundanala@xxxxxxx>
- [PATCH V4 4/4] MAINTAINERS: Add maintainers for ZynqMP NVMEM driver
- From: Praveen Teja Kundanala <praveen.teja.kundanala@xxxxxxx>
- [PATCH V4 3/4] nvmem: zynqmp_nvmem: Add support to access efuse
- From: Praveen Teja Kundanala <praveen.teja.kundanala@xxxxxxx>
- [PATCH V4 0/4] Add ZynqMP efuse access support
- From: Praveen Teja Kundanala <praveen.teja.kundanala@xxxxxxx>
- [PATCH V4 1/4] firmware: xilinx: Add ZynqMP efuse access API
- From: Praveen Teja Kundanala <praveen.teja.kundanala@xxxxxxx>
- Re: [PATCH v4 2/5] phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH V7 2/2] drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
- From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
- Re: [PATCH V2 2/2] phy: freescale: add Samsung HDMI PHY
- From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: usb: qcom,pmic-typec: add support for the PM4125 block
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 2/2] iio: adc: ti-ads1298: Add driver
- From: Mike Looijmans <mike.looijmans@xxxxxxxx>
- [PATCH v2 1/2] dt-bindings: iio: adc: ti-ads1298: Add bindings
- From: Mike Looijmans <mike.looijmans@xxxxxxxx>
- Re: [PATCH RESEND] arm: topology: Fix missing clock-frequency property warning
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: pinctrl: cy8x95x0: Minor fix & update
- From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: fpga: xlnx,fpga-slave-selectmap: add DT schema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: media: Add sram-size Property for Wave5
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
- From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
- Re: [PATCH v12 22/25] irqchip: Add RISC-V advanced PLIC driver for direct-mode
- From: Clément Léger <cleger@xxxxxxxxxxxx>
- Re: [PATCH v12 22/25] irqchip: Add RISC-V advanced PLIC driver for direct-mode
- From: Anup Patel <apatel@xxxxxxxxxxxxxxxx>
- Re: Re: [PATCH RFC 0/4] Support for Simulated Panels
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- [PATCH v1 2/2] of: property: Improve finding the supplier of a remote-endpoint property
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- [PATCH v1 1/2] of: property: Improve finding the consumer of a remote-endpoint property
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- [PATCH v1 0/2] Improve remote-endpoint parsing
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: Re: [PATCH RFC 0/4] Support for Simulated Panels
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [net-next PATCH v3 0/2] net: mdio-ipq4019: fix wrong default MDC rate
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
- From: Antoine Tenart <atenart@xxxxxxxxxx>
- Re: Re: Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [RFC PATCH 11/13] arm64: dts: ti: k3-am62p: Add missing properties for MMC
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [RFC PATCH 01/13] drivers: mmc: host: sdhci_am654: Add tuning algorithm for delay chain
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [RFC PATCH 13/13] arm64: dts: ti: k3-am6*: Reorganize MMC properties
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v6 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
- From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
- Re: [PATCH v4 3/5] crypto: tegra: Add Tegra Security Engine driver
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: renesas: r9a08g045: Add missing interrupts of IRQC node
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 2/3] arm64: dts: renesas: rz-g2l-family: Add missing interrupts from IRQC IP block
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 0/3] Renesas RZ/G2L family and RZ/G3S add missing IRQC interrupts
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH v6 10/10] coresight-tpdm: Add msr register support for CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 09/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 08/10] coresight-tpdm: Add timestamp control register support for the CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 07/10] coresight-tpdm: Add pattern registers support for CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 06/10] coresight-tpdm: Add support to configure CMB
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 04/10] coresight-tpdm: Add CMB dataset support
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 03/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 00/10] Add support to configure TPDM CMB subunit
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- [PATCH v6 01/10] coresight-tpdm: Optimize the store function of tpdm simple dataset
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH v12 22/25] irqchip: Add RISC-V advanced PLIC driver for direct-mode
- From: Clément Léger <cleger@xxxxxxxxxxxx>
- RE: [EXT] Re: [PATCH v5 5/8] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH 1/5] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/Five SoC
- From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
- Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- RE: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v4 00/17] Support IGT in display driver
- From: Shawn Sung (宋孝謙) <Shawn.Sung@xxxxxxxxxxxx>
- Re: [RFC 6/9] PCI: create platform devices for child OF nodes of the port node
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [RFC 0/9] power: sequencing: implement the subsystem and add first users
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- RE: [PATCH v4 0/5] PHY: Add support for dual refclk configurations in Cadence Torrent PHY driver
- From: Swapnil Kashinath Jakhade <sjakhade@xxxxxxxxxxx>
- Re: [PATCH v2 4/5] crypto: starfive: Add sm3 support for JH8100
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v6 2/2] dt-bindings: rtc: add max313xx RTCs
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: net: fec: add iommus property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: mmc: fsl-imx-esdhc: add iommus property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- RE: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] regulator: dt-bindings: gpio-regulator: Fix {gpios-,}states limits
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v3 6/8] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- RE: [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3 8/8] dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 7/8] watchdog: rzg2l_wdt: Add suspend/resume support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 6/8] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 5/8] watchdog: rzg2l_wdt: Remove comparison with zero
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 4/8] watchdog: rzg2l_wdt: Remove reset de-assert on probe/stop
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 3/8] watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 2/8] watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 1/8] watchdog: rzg2l_wdt: Select PM
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 0/8] watchdog: rzg2l_wdt: Add support for RZ/G3S
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v5 5/8] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support to PCIe
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 4/5] memory: brcmstb_dpfe: introduce version-specific compatible strings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: memory: additional compatible strings for Broadcom DPFE
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 0/2] drivers: rtc: add max313xx series rtc driver
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v9 4/5] documentation: media: add documentation for Toshiba Visconti Video Input Interface driver
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH v9 5/5] riscv: dts: add clock generator for Sophgo SG2042 SoC
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v9 4/5] clk: sophgo: Add SG2042 clock driver
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v9 3/5] dt-bindings: clock: sophgo: add clkgen for SG2042
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v9 2/5] dt-bindings: clock: sophgo: add RP gate clocks for SG2042
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v9 1/5] dt-bindings: clock: sophgo: add pll clocks for SG2042
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v9 0/5] riscv: sophgo: add clock support for sg2042
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH 5/5] firmware: imx: add i.MX95 MISC driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 4/5] firmware: imx: support BBM module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 3/5] firmware: arm_scmi: add initial support for i.MX MISC protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 2/5] firmware: arm_scmi: add initial support for i.MX BBM protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 1/5] dt-bindings: firmware: add i.MX SCMI Extension protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 0/5] firmware: support i.MX95 SCMI BBM/MISC Extenstion
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH 2/2] of: property: use unsigned int return on of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH 1/2] of: property: add missing kerneldoc for of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH 0/2] of: property: cleanup of_graph_get_endpoint_count()
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [RESEND PATCH v2] arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP
- From: Aradhya Bhatia <a-bhatia1@xxxxxx>
- Find attacted revice Order and electronic PI [order code: 149097] [Invoice Code: 91064911]
- From: SF_ 电子发票<bei@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] Add board-id support for multiple DT selection
- From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
- Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
- From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
- Re: [PATCH v3 0/3] Add AM64x ICSSG Ethernet support
- From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
- Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: thermal-zones: Don't require polling-delay(-passive)
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 2/2] thermal/of: Assume polling-delay(-passive) 0 when absent
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RFC 0/9] power: sequencing: implement the subsystem and add first users
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RFC 9/9] PCI/pwrctl: add a PCI power control driver for power sequenced devices
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RFC 6/9] PCI: create platform devices for child OF nodes of the port node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH v6 1/2] drivers: rtc: add max313xx series rtc driver
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v6 0/2] drivers: rtc: add max313xx series rtc driver
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- [PATCH v6 2/2] dt-bindings: rtc: add max313xx RTCs
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- 回复: 回复: [v2] riscv: dts: starfive: jh7110: Add camera subsystem nodes
- From: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
- Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [net-next PATCH v5 8/9] net: phy: qcom: generalize some qca808x LED functions
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [RFC 0/9] power: sequencing: implement the subsystem and add first users
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v5 0/2] drivers: rtc: add max313xx series rtc driver
- From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
- [linux][PATCH v6 3/3] dt-bindings: mfd: atmel,hlcdc: Convert to DT schema format
- From: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
- [linux][PATCH v6 2/3] dt-bindings: atmel,hlcdc: convert pwm bindings to json-schema
- From: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
- [linux][PATCH v6 1/3] dt-bindings: display: convert Atmel's HLCDC to DT schema
- From: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
- [linux][PATCH v6 0/3] Convert Microchip's HLCDC Text based DT bindings to JSON schema
- From: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH 0/2] Add QCOM PBS driver
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: Re: Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: qcom: pm4125: define USB-C related blocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]