On 5/16/24 10:00 AM, Francesco Dolcini wrote:
Hello Marek,
Hi,
On Tue, May 14, 2024 at 03:06:42AM +0200, Marek Vasut wrote:
Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and
I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead
of HDMI DDC mode to permit connection of other I2C devices on those buses.
Are you able to read the HDMI EDID with such configuration? I have the
patch ready for verdin imx8mp, I just did not have time to figure out
this last details.
Yes with ddc-i2c-bus in hdmi_tx{} node, no with ddc-i2c-bus in connector
node. Maybe that's what you're running into ? The DW HDMI core needs the
ddc-i2c-bus property in hdmi_tx{} node if you use non-native I2C bus for
the DDC channel.
