[PATCH v2 2/3] arm64: dts: ti: k3-j722s-main: Redefine USB1 node description

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



USB1 controller on J722S and AM62P are from different vendors.
Redefine the USB1 node description for J722S by deleting the
node inherited from AM62P dtsi.

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
---
Changes since v1:
----------------
* The entire node which was added in k3-j722s.dtsi in v1 in now moved
  to k3-j722s-main.dtsi as USB is a main domain peripheral

* Used generic node names - renamed "cdns-usb@f920000" to "usb@f920000"

v1: https://lore.kernel.org/all/20240429120932.11456-1-r-gunasekaran@xxxxxx/

 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 1fd88cc8545f..54f37aff0eca 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -6,6 +6,13 @@
 
 #include <dt-bindings/phy/phy-ti.h>
 
+/*
+ * USB1 controller on AM62P and J722S are of different IP.
+ * Delete AM62P's USBSS1 node definition and redefine it for J722S.
+ */
+
+/delete-node/ &usbss1;
+
 / {
 	serdes_refclk: clk-0 {
 		compatible = "fixed-clock";
@@ -52,6 +59,38 @@
 			status = "disabled"; /* Needs lane config */
 		};
 	};
+
+	usbss1: usb@f920000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x0f920000 0x00 0x100>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31200000{
+			compatible = "cdns,usb3";
+			reg = <0x00 0x31200000 0x00 0x10000>,
+			      <0x00 0x31210000 0x00 0x10000>,
+			      <0x00 0x31220000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
 };
 
 &main_conf {
-- 
2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux