> Il 12/05/24 17:27, Lorenzo Bianconi ha scritto: > > Introduce support for Airoha PCIe PHY controller available in EN7581 > > SoC. > > > > Tested-by: Zhengping Zhang <zhengping.zhang@xxxxxxxxxx> > > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> > > --- > > MAINTAINERS | 8 + > > arch/arm64/configs/defconfig | 1 + > > drivers/phy/Kconfig | 10 + > > drivers/phy/Makefile | 1 + > > drivers/phy/phy-airoha-pcie-regs.h | 476 +++++++++++ > > drivers/phy/phy-airoha-pcie.c | 1227 ++++++++++++++++++++++++++++ > > 6 files changed, 1723 insertions(+) > > create mode 100644 drivers/phy/phy-airoha-pcie-regs.h > > create mode 100644 drivers/phy/phy-airoha-pcie.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index ce9fac46f741..d918d41a80a3 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -653,6 +653,14 @@ S: Supported > > F: fs/aio.c > > F: include/linux/*aio*.h > > +AIROHA PCIE PHY DRIVER > > +M: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> > > +L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers) > > +S: Maintained > > +F: Documentation/devicetree/bindings/phy/airoha,pcie-phy.yaml > > +F: drivers/phy/phy-airoha-pcie-regs.h > > +F: drivers/phy/phy-airoha-pcie.c > > + > > AIROHA SPI SNFI DRIVER > > M: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> > > M: Ray Liu <ray.liu@xxxxxxxxxx> > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > > index a53c58584bcf..c0eacced5d41 100644 > > --- a/arch/arm64/configs/defconfig > > +++ b/arch/arm64/configs/defconfig > > No, this should be in a different commit. ack, I will do in v2 > > > @@ -1479,6 +1479,7 @@ CONFIG_RESET_QCOM_AOSS=y > > CONFIG_RESET_QCOM_PDC=m > > CONFIG_RESET_RZG2L_USBPHY_CTRL=y > > CONFIG_RESET_TI_SCI=y > > +CONFIG_PHY_AIROHA_PCIE=y > > CONFIG_PHY_XGENE=y > > CONFIG_PHY_CAN_TRANSCEIVER=m > > CONFIG_PHY_SUN4I_USB=y > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > > index 787354b849c7..8f9a7a6c4bba 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -72,6 +72,16 @@ config PHY_CAN_TRANSCEIVER > > functional modes using gpios and sets the attribute max link > > rate, for CAN drivers. > > +config PHY_AIROHA_PCIE > > + tristate "Airoha PCIe-PHY Driver" > > + depends on ARCH_AIROHA || COMPILE_TEST > > + depends on OF > > + select GENERIC_PHY > > + help > > + Say 'Y' here to add support for Airoha PCIe PHY driver. > > Say Y here (without quotes) ack, I will fix in v2 Regards, Lorenzo > > Apart from that: > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > > > + This driver create the basic PHY instance and provides initialize > > + callback for PCIe GEN3 port. > > + > > source "drivers/phy/allwinner/Kconfig" > > source "drivers/phy/amlogic/Kconfig" > > source "drivers/phy/broadcom/Kconfig" >
Attachment:
signature.asc
Description: PGP signature
