On Mon, May 13, 2024 at 05:38:16PM +0200, matteomartelli3@xxxxxxxxx wrote: > On Monday, 13 May 2024 10.53.57 CEST Krzysztof Kozlowski wrote: > > On 10/05/2024 15:00, Matteo Martelli wrote: > > > Add DT bindings documentation for the Everest-semi ES8311 codec. > > > > > > Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio > > > interface and I2C control. > > > > > > Signed-off-by: Matteo Martelli <matteomartelli3@xxxxxxxxx> > > > --- > > > .../bindings/sound/everest,es8311.yaml | 52 +++++++++++++++++++ > > > 1 file changed, 52 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/sound/everest,es8311.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/sound/everest,es8311.yaml b/Documentation/devicetree/bindings/sound/everest,es8311.yaml > > > new file mode 100644 > > > index 000000000000..54fb58b9ab58 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/sound/everest,es8311.yaml > > > @@ -0,0 +1,52 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/sound/everest,es8311.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Everest ES8311 audio CODEC > > > > This looks exactly like es8316, except of later added port. Are you sure > > you are not planning to add port later, which would make both schemas > > identical? > > I did not pay enough attention to audio-graph-port property which is in > fact supported and could be added as well. Thus the es8311.yaml would be > identical to es8316.yaml. My guess is that I should just add the > "everest,es8311" compatible string to the existing es8316.yaml even if the > two drivers are separate (like for instance mediatek,mt8186-clock.yaml). Is > this correct? Yes. > If that's the case: > * should the evereset,es8316.yaml file be renamed to evereset,es831x.yaml? No. > * should I also add myself to the maintainers list of that schema? That's up to you. Do you want to be CCed on future changes to it? Rob
