Re: [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 5/14/2024 12:37 AM, Trilok Soni wrote:
> On 5/13/2024 2:07 AM, Tengfei Fan wrote:
>> QCS8550 is derived from SM8550. The differnece between SM8550 and
> 
> spellcheck s/difference/difference 
> 
>> QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used
>> in IoT scenarios.
> 
> IoT products and not scenarios. 
> 
>> QCS8550 firmware has different memory map with SM8550 firmware. 
> 
> "QCS8550 firmware has different memory map compared to SM8550"
> 
> 
> The
>> memory map will be runtime added through bootloader.
> 
> 
>> There are 3 types of reserved memory regions here:
>> 1. Firmware related regions which aren't shared with kernel.
>>     The device tree source in kernel doesn't need to have node to indicate
>> the firmware related reserved information. OS bootloader conveys the
> 
> Just "Bootloader conveys the information by updating devicetree at runtime" ?
> 
>> information by update device tree in runtime.
>>     This will be described as: UEFI saves the physical address of the
>> UEFI System Table to dts file's chosen node. Kernel read this table and
>> add reserved memory regions to efi config table. Current reserved memory
>> region may have reserved region which was not yet used, release note of
>> the firmware have such kind of information.
> 
> I understand what you are trying to explain below, but can we simplify further? I 
> had to read multiple times to understand what you are trying to convey above. 
> 
>> 2. Firmware related memory regions which are shared with Kernel
>>     Each region has a specific node with specific label name for later
>> phandle reference from other driver dt node.

How about like this:
 2. Firmware related memory regions which are shared with Kernel
The device tree source in the kernel needs to include nodes that
indicate firmware-related shared information. A label name is suggested
because this type of shared information needs to be referenced by
specific drivers for handling purposes.

>> 3. PIL regions.
> 
> Do we use the PIL - peripheral image loader in the upstream kernel or just remoteproc?
> I am fine w/ PIL if it is used at other places in Qualcomm remoteproc. 
> 
>>     PIL regions will be reserved and then assigned to subsystem firmware
>> later.
>> Here is a reserved memory map for this platform:
>> 0x100000000 +------------------+
>>             |                  |
>>             | Firmware Related |
>>             |                  |
>>  0xd4d00000 +------------------+
>>             |                  |
>>             | Kernel Available |
> 
> What is "kernel available" means? 

It means not reserved memory, normal available memory from kernel point
of view.

> 
>>             |                  |
>>  0xa7000000 +------------------+
>>             |                  |
>>             |    PIL Region    |
>>             |                  |
>>  0x8a800000 +------------------+
>>             |                  |
>>             | Firmware Related |
>>             |                  |
>>  0x80000000 +------------------+
> 
>> Note that:
> 
> Do we need to write "Note that:" ? 
> 
>> 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up,
>> it is available for kernel usage. This region is not suggested to be
>> used by kernel features like ramoops, suspend resume etc.
>>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/qcs8550.dtsi | 169 ++++++++++++++++++++++++++
>>  1 file changed, 169 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qcs8550.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
>> new file mode 100644
>> index 000000000000..a3ebf3d4e16d
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
>> @@ -0,0 +1,169 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include "sm8550.dtsi"
>> +
>> +/delete-node/ &reserved_memory;
>> +
>> +/ {
>> +	reserved_memory: reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +
>> +		/* These are 3 types of reserved memory regions here:
>> +		 * 1. Firmware related regions which aren't shared with kernel.
>> +		 *     The device tree source in kernel doesn't need to have node to
>> +		 * indicate the firmware related reserved information. OS bootloader
>> +		 * conveys the information by update device tree in runtime.
>> +		 *     This will be described as: UEFI saves the physical address of
>> +		 * the UEFI System Table to dts file's chosen node. Kernel read this
>> +		 * table and add reserved memory regions to efi config table. Current
>> +		 * reserved memory region may have reserved region which was not yet
>> +		 * used, release note of the firmware have such kind of information.
>> +		 * 2. Firmware related memory regions which are shared with Kernel.
>> +		 *     Each region has a specific node with specific label name for
>> +		 * later phandle reference from other driver dt node.
>> +		 * 3. PIL regions.
>> +		 *     PIL regions will be reserved and then assigned to subsystem
>> +		 * firmware later.
>> +		 * Here is a reserved memory map for this platform:
> 
> Just check the comment above and it will apply here. 
> 
>> +		 * 0x100000000 +------------------+
>> +		 *             |                  |
>> +		 *             | Firmware Related |
>> +		 *             |                  |
>> +		 *  0xd4d00000 +------------------+
>> +		 *             |                  |
>> +		 *             | Kernel Available |
>> +		 *             |                  |
>> +		 *  0xa7000000 +------------------+
>> +		 *             |                  |
>> +		 *             |    PIL Region    |
>> +		 *             |                  |
>> +		 *  0x8a800000 +------------------+
>> +		 *             |                  |
>> +		 *             | Firmware Related |
>> +		 *             |                  |
>> +		 *  0x80000000 +------------------+
>> +		 * Note that:
>> +		 * 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up,
>> +		 * it is available for kernel usage. This region is not suggested to
>> +		 * be used by kernel features like ramoops, suspend resume etc.
>> +		 */
>> +
>> +		/*
>> +		 * Firmware related regions, bootlader will possible reserve parts of
> 
> spellcheck s/bootlader/bootloader
> 
>> +		 * region from 0x80000000..0x8a800000.
>> +		 */
>> +		aop_image_mem: aop-image-region@81c00000 {
>> +			reg = <0x0 0x81c00000 0x0 0x60000>;
>> +			no-map;
>> +		};
>> +
>> +		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
>> +			compatible = "qcom,cmd-db";
>> +			reg = <0x0 0x81c60000 0x0 0x20000>;
>> +			no-map;
>> +		};
>> +
>> +		aop_config_mem: aop-config-region@81c80000 {
>> +			no-map;
>> +			reg = <0x0 0x81c80000 0x0 0x20000>;
>> +		};
>> +
>> +		smem_mem: smem-region@81d00000 {
>> +			compatible = "qcom,smem";
>> +			reg = <0x0 0x81d00000 0x0 0x200000>;
>> +			hwlocks = <&tcsr_mutex 3>;
>> +			no-map;
>> +		};
>> +
>> +		adsp_mhi_mem: adsp-mhi-region@81f00000 {
>> +			reg = <0x0 0x81f00000 0x0 0x20000>;
>> +			no-map;
>> +		};
>> +
>> +		/* PIL region */
>> +		mpss_mem: mpss-region@8a800000 {
>> +			reg = <0x0 0x8a800000 0x0 0x10800000>;
>> +			no-map;
>> +		};
>> +
>> +		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
>> +			reg = <0x0 0x9b000000 0x0 0x80000>;
>> +			no-map;
>> +		};
>> +
>> +		ipa_fw_mem: ipa-fw-region@9b080000 {
>> +			reg = <0x0 0x9b080000 0x0 0x10000>;
>> +			no-map;
>> +		};
>> +
>> +		ipa_gsi_mem: ipa-gsi-region@9b090000 {
>> +			reg = <0x0 0x9b090000 0x0 0xa000>;
>> +			no-map;
>> +		};
>> +
>> +		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
>> +			reg = <0x0 0x9b09a000 0x0 0x2000>;
>> +			no-map;
>> +		};
>> +
>> +		spss_region_mem: spss-region@9b100000 {
>> +			reg = <0x0 0x9b100000 0x0 0x180000>;
>> +			no-map;
>> +		};
>> +
>> +		spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 {
>> +			reg = <0x0 0x9b280000 0x0 0x80000>;
>> +			no-map;
>> +		};
>> +
>> +		camera_mem: camera-region@9b300000 {
>> +			reg = <0x0 0x9b300000 0x0 0x800000>;
>> +			no-map;
>> +		};
>> +
>> +		video_mem: video-region@9bb00000 {
>> +			reg = <0x0 0x9bb00000 0x0 0x700000>;
>> +			no-map;
>> +		};
>> +
>> +		cvp_mem: cvp-region@9c200000 {
>> +			reg = <0x0 0x9c200000 0x0 0x700000>;
>> +			no-map;
>> +		};
>> +
>> +		cdsp_mem: cdsp-region@9c900000 {
>> +			reg = <0x0 0x9c900000 0x0 0x2000000>;
>> +			no-map;
>> +		};
>> +
>> +		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
>> +			reg = <0x0 0x9e900000 0x0 0x80000>;
>> +			no-map;
>> +		};
>> +
>> +		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
>> +			reg = <0x0 0x9e980000 0x0 0x80000>;
>> +			no-map;
>> +		};
>> +
>> +		adspslpi_mem: adspslpi-region@9ea00000 {
>> +			reg = <0x0 0x9ea00000 0x0 0x4080000>;
>> +			no-map;
>> +		};
>> +
>> +		/*
>> +		 * Firmware related regions, bootlader will possible reserve parts of
> 
> Ditto. 
> 
>> +		 * region from 0xd8000000..0x100000000.
>> +		 */
>> +		mpss_dsm_mem: mpss_dsm_region@d4d00000 {
>> +			reg = <0x0 0xd4d00000 0x0 0x3300000>;
>> +			no-map;
>> +		};
>> +	};
>> +};

-- 
Thx and BRs,
Aiqun(Maria) Yu




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux