Re: [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/14/2024 9:21 AM, Aiqun Yu (Maria) wrote:


On 5/14/2024 12:37 AM, Trilok Soni wrote:
On 5/13/2024 2:07 AM, Tengfei Fan wrote:
QCS8550 is derived from SM8550. The differnece between SM8550 and

spellcheck s/difference/difference

Typos wil be modified.


QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used
in IoT scenarios.

IoT products and not scenarios.

I will modify this description.


QCS8550 firmware has different memory map with SM8550 firmware.

"QCS8550 firmware has different memory map compared to SM8550"


The
memory map will be runtime added through bootloader.

In the next version of the patch series, I will add "The" to make the sentence's grammar more complete.



There are 3 types of reserved memory regions here:
1. Firmware related regions which aren't shared with kernel.
     The device tree source in kernel doesn't need to have node to indicate
the firmware related reserved information. OS bootloader conveys the

Just "Bootloader conveys the information by updating devicetree at runtime" ?

I will modify this description.


information by update device tree in runtime.
     This will be described as: UEFI saves the physical address of the
UEFI System Table to dts file's chosen node. Kernel read this table and
add reserved memory regions to efi config table. Current reserved memory
region may have reserved region which was not yet used, release note of
the firmware have such kind of information.

I understand what you are trying to explain below, but can we simplify further? I
had to read multiple times to understand what you are trying to convey above.

2. Firmware related memory regions which are shared with Kernel
     Each region has a specific node with specific label name for later
phandle reference from other driver dt node.

How about like this:
  2. Firmware related memory regions which are shared with Kernel
The device tree source in the kernel needs to include nodes that
indicate firmware-related shared information. A label name is suggested
because this type of shared information needs to be referenced by
specific drivers for handling purposes.

3. PIL regions.

Do we use the PIL - peripheral image loader in the upstream kernel or just remoteproc?
I am fine w/ PIL if it is used at other places in Qualcomm remoteproc.

We are only used for remoteproc in the upstream kernel, and I will remove the description related to PIL.


     PIL regions will be reserved and then assigned to subsystem firmware
later.
Here is a reserved memory map for this platform:
0x100000000 +------------------+
             |                  |
             | Firmware Related |
             |                  |
  0xd4d00000 +------------------+
             |                  |
             | Kernel Available |

What is "kernel available" means?

It means not reserved memory, normal available memory from kernel point
of view.


             |                  |
  0xa7000000 +------------------+
             |                  |
             |    PIL Region    |
             |                  |
  0x8a800000 +------------------+
             |                  |
             | Firmware Related |
             |                  |
  0x80000000 +------------------+

Note that:

Do we need to write "Note that:" ?

This "Note that:" will be removed.


0xa7000000..0xA8000000 is used by bootloader, when kernel boot up,
it is available for kernel usage. This region is not suggested to be
used by kernel features like ramoops, suspend resume etc.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/qcs8550.dtsi | 169 ++++++++++++++++++++++++++
  1 file changed, 169 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/qcs8550.dtsi

diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
new file mode 100644
index 000000000000..a3ebf3d4e16d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sm8550.dtsi"
+
+/delete-node/ &reserved_memory;
+
+/ {
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+
+		/* These are 3 types of reserved memory regions here:
+		 * 1. Firmware related regions which aren't shared with kernel.
+		 *     The device tree source in kernel doesn't need to have node to
+		 * indicate the firmware related reserved information. OS bootloader
+		 * conveys the information by update device tree in runtime.
+		 *     This will be described as: UEFI saves the physical address of
+		 * the UEFI System Table to dts file's chosen node. Kernel read this
+		 * table and add reserved memory regions to efi config table. Current
+		 * reserved memory region may have reserved region which was not yet
+		 * used, release note of the firmware have such kind of information.
+		 * 2. Firmware related memory regions which are shared with Kernel.
+		 *     Each region has a specific node with specific label name for
+		 * later phandle reference from other driver dt node.
+		 * 3. PIL regions.
+		 *     PIL regions will be reserved and then assigned to subsystem
+		 * firmware later.
+		 * Here is a reserved memory map for this platform:

Just check the comment above and it will apply here.

Sure, I will modify these according to the comments above.


+		 * 0x100000000 +------------------+
+		 *             |                  |
+		 *             | Firmware Related |
+		 *             |                  |
+		 *  0xd4d00000 +------------------+
+		 *             |                  |
+		 *             | Kernel Available |
+		 *             |                  |
+		 *  0xa7000000 +------------------+
+		 *             |                  |
+		 *             |    PIL Region    |
+		 *             |                  |
+		 *  0x8a800000 +------------------+
+		 *             |                  |
+		 *             | Firmware Related |
+		 *             |                  |
+		 *  0x80000000 +------------------+
+		 * Note that:
+		 * 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up,
+		 * it is available for kernel usage. This region is not suggested to
+		 * be used by kernel features like ramoops, suspend resume etc.
+		 */
+
+		/*
+		 * Firmware related regions, bootlader will possible reserve parts of

spellcheck s/bootlader/bootloader

Typos wil be modified.


+		 * region from 0x80000000..0x8a800000.
+		 */
+		aop_image_mem: aop-image-region@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config-region@81c80000 {
+			no-map;
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+		};
+
+		smem_mem: smem-region@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x81d00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi-region@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		/* PIL region */
+		mpss_mem: mpss-region@8a800000 {
+			reg = <0x0 0x8a800000 0x0 0x10800000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
+			reg = <0x0 0x9b000000 0x0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw-region@9b080000 {
+			reg = <0x0 0x9b080000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi-region@9b090000 {
+			reg = <0x0 0x9b090000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
+			reg = <0x0 0x9b09a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@9b100000 {
+			reg = <0x0 0x9b100000 0x0 0x180000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 {
+			reg = <0x0 0x9b280000 0x0 0x80000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@9b300000 {
+			reg = <0x0 0x9b300000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video-region@9bb00000 {
+			reg = <0x0 0x9bb00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9c200000 {
+			reg = <0x0 0x9c200000 0x0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0x0 0x9c900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
+			reg = <0x0 0x9e900000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
+			reg = <0x0 0x9e980000 0x0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi-region@9ea00000 {
+			reg = <0x0 0x9ea00000 0x0 0x4080000>;
+			no-map;
+		};
+
+		/*
+		 * Firmware related regions, bootlader will possible reserve parts of

Ditto.

Typos wil be modified.


+		 * region from 0xd8000000..0x100000000.
+		 */
+		mpss_dsm_mem: mpss_dsm_region@d4d00000 {
+			reg = <0x0 0xd4d00000 0x0 0x3300000>;
+			no-map;
+		};
+	};
+};


--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux