On Tue, 14 May 2024 14:54:27 -0500, Eddie James wrote: > The FSI2SPI bridge has several SPI controllers behind it, which > should be documented. Also, therefore the node needs to specify > address and size cells. > > Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > --- > Depends on https://lore.kernel.org/all/20240514192630.152747-1-eajames@xxxxxxxxxxxxx/ > > .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 ++++++++++++++++--- > 1 file changed, 32 insertions(+), 4 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/spi/ibm,spi-fsi.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.example.dtb: fsi2spi@1c00: spi@0: False schema does not allow {'compatible': ['ibm,spi-fsi'], 'reg': [[0]], '#address-cells': [[1]], '#size-cells': [[0]], 'eeprom@0': {'compatible': ['atmel,at25'], 'reg': [[0]], 'address-width': [[24]], 'pagesize': [[256]], 'size': [[524288]], 'spi-max-frequency': [[1000000]]}} from schema $id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml# Documentation/devicetree/bindings/fsi/ibm,fsi2spi.example.dtb: /example-0/fsi2spi@1c00/spi@0: failed to match any schema with compatible: ['ibm,spi-fsi'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240514195435.155372-2-eajames@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
