U-Boot V2 Development (Barebox)

• Date Index

• [PATCH 01/34] scripts: Add common header files for tools, (continued)
  • [PATCH 01/34] scripts: Add common header files for tools, Sascha Hauer
  • [PATCH 30/34] scripts: imx-image: Allow to create HAB signed images suitable for USB upload, Sascha Hauer
  • [PATCH 29/34] scripts: imx-image: Factor out a read_file function, Sascha Hauer
  • [PATCH 24/34] scripts: imx-image: Support adding a Super Root Key to the image, Sascha Hauer
  • [PATCH 07/34] imx: hab: rename driver dir to hab/, Sascha Hauer
  • [PATCH 25/34] scripts: imx: Create CSF files from imx config file, Sascha Hauer
  • [PATCH 20/34] scripts: imx-usb-loader: Add -s and -i options, Sascha Hauer
  • [PATCH 21/34] scripts: imx: Drop double check, Sascha Hauer
• [PATCH 1/6] net: phy: micrel: Staticise ksz8873mll_read_status(), Philipp Zabel
  • [PATCH 4/6] net: phy: micrel: Center FLP timing at 16ms, Philipp Zabel
  • [PATCH 5/6] net: phy: micrel: Add workaround for bad autoneg, Philipp Zabel
  • [PATCH 2/6] net: phy: micrel: use BIT macro, Philipp Zabel
  • [PATCH 3/6] net: phy: micrel: Be more const correct, Philipp Zabel
  • [PATCH 6/6] net: phy: micrel: errata for KSZ9031, Philipp Zabel
    • Re: [PATCH 6/6] net: phy: micrel: errata for KSZ9031, Philipp Zabel
  • Re: [PATCH 1/6] net: phy: micrel: Staticise ksz8873mll_read_status(), Sascha Hauer
• [RFC] nfs: forward filesystem options to the kernel command line, Juergen Borleis
  • [PATCH v2] nfs: forward filesystem options to the kernel command line, Juergen Borleis
    • Re: [PATCH v2] nfs: forward filesystem options to the kernel command line, Sascha Hauer
• Raspberry PI: Incorrect information about the monitor, support
• [PATCH v4] Terasic DE0-Nano-SoC: add support, Tim Sander
  • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Andrey Smirnov
    • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Sascha Hauer
    • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Trent Piepho
      • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Andrey Smirnov
    • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Tim Sander
      • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Sascha Hauer
        • Re: [PATCH v4] Terasic DE0-Nano-SoC: add support, Tim Sander
• [PATCH] Terasic DE0 NANO-SoC: add support, Tim Sander
  • Re: [PATCH] Terasic DE0 NANO-SoC: add support, Steffen Trumtrar
    • Re: [PATCH] Terasic DE0 NANO-SoC: add support, Antony Pavlov
      • Re: [PATCH] Terasic DE0 NANO-SoC: add support, Tim Sander
        • Re: [PATCH] Terasic DE0 NANO-SoC: add support, Steffen Trumtrar
          • Re: [PATCH] Terasic DE0 NANO-SoC: add support, Tim Sander
            • Re: [PATCH] Terasic DE0 NANO-SoC: add support, Steffen Trumtrar
              • [PATCH v2] Terasic DE0-Nano-SoC: add support, Tim Sander
                • [PATCH v3] Terasic DE0-Nano-SoC: add support, Tim Sander
                  • Re: [PATCH v3] Terasic DE0-Nano-SoC: add support, Trent Piepho
                    • Re: [PATCH v3] Terasic DE0-Nano-SoC: add support, Tim Sander
                      • Re: [PATCH v3] Terasic DE0-Nano-SoC: add support, Sascha Hauer
• [RFC 1/2] misc: Add MAC address mapper "driver", Andrey Smirnov
  • [RFC 2/2] arm/dts: i.MX6: Use generic MAC address mapper, Andrey Smirnov
  • Re: [RFC 1/2] misc: Add MAC address mapper "driver", Sascha Hauer
    • Re: [RFC 1/2] misc: Add MAC address mapper "driver", Trent Piepho
      • Re: [RFC 1/2] misc: Add MAC address mapper "driver", Andrey Smirnov
        • Re: [RFC 1/2] misc: Add MAC address mapper "driver", Trent Piepho
          • Re: [RFC 1/2] misc: Add MAC address mapper "driver", Andrey Smirnov
    • Re: [RFC 1/2] misc: Add MAC address mapper "driver", Andrey Smirnov
• [PATCH] fixup! [PATCH v2 8/8] miitool: Add code to register a PHY, Andrey Smirnov
• [PATCH v2 0/8] Bitbang MDIO, miitool changes, Andrey Smirnov
  • [PATCH v2 1/8] include/linux/phy.h: Add MII_ADDR_C45, Andrey Smirnov
  • [PATCH v2 5/8] mdio_bus: Add mdiobus_get_bus() function, Andrey Smirnov
  • [PATCH v2 7/8] mdio_bus: Change PHY's naming scheme, Andrey Smirnov
    • Re: [PATCH v2 7/8] mdio_bus: Change PHY's naming scheme, Sascha Hauer
      • Re: [PATCH v2 7/8] mdio_bus: Change PHY's naming scheme, Andrey Smirnov
        • Re: [PATCH v2 7/8] mdio_bus: Change PHY's naming scheme, Sascha Hauer
  • [PATCH v2 3/8] miitool: Fix PHY argument handling, Andrey Smirnov
  • [PATCH v2 4/8] mdio_bus: Change dev_info to dev_dbg, Andrey Smirnov
  • [PATCH v2 2/8] net: Port bitbanged MDIO code from Linux kernel, Andrey Smirnov
  • [PATCH v2 6/8] miitool: Don't print negative parent IDs, Andrey Smirnov
  • [PATCH v2 8/8] miitool: Add code to register a PHY, Andrey Smirnov
    • Re: [PATCH v2 8/8] miitool: Add code to register a PHY, Sascha Hauer
      • Re: [PATCH v2 8/8] miitool: Add code to register a PHY, Andrey Smirnov
        • Re: [PATCH v2 8/8] miitool: Add code to register a PHY, Sascha Hauer
          • Re: [PATCH v2 8/8] miitool: Add code to register a PHY, Andrey Smirnov
• [PATCH 1/2] dcache: add missing linux/list.h include, yegorslists
  • [PATCH 2/2] fs: add super_operations infrastructure, yegorslists
    • Re: [PATCH 2/2] fs: add super_operations infrastructure, Sascha Hauer
      • Re: [PATCH 2/2] fs: add super_operations infrastructure, Yegor Yefremov
  • Re: [PATCH 1/2] dcache: add missing linux/list.h include, Sascha Hauer
• i.MX HABv4 rework and HABv3 support, Sascha Hauer
  • [PATCH 05/23] scripts: imx-usb-loader: Move definitions up, Sascha Hauer
  • [PATCH 01/23] ARM: i.MX: Add HABv3 Kconfig variables, Sascha Hauer
  • [PATCH 04/23] scripts: imx-usb-loader: Make readonly arguments const, Sascha Hauer
  • [PATCH 13/23] scripts: imx: move macro definitions to common header file, Sascha Hauer
    • Re: [PATCH 13/23] scripts: imx: move macro definitions to common header file, Sam Ravnborg
      • Re: [PATCH 13/23] scripts: imx: move macro definitions to common header file, Sascha Hauer
        • Re: [PATCH 13/23] scripts: imx: move macro definitions to common header file, Sam Ravnborg
  • [PATCH 12/23] scripts: imx-image: move check to context data, Sascha Hauer
  • [PATCH 10/23] scripts: imx-image: Add context struct to config parsers, Sascha Hauer
  • [PATCH 06/23] scripts: imx-image: Allow dcd offset 0x0, Sascha Hauer
  • [PATCH 16/23] scripts: imx-usb-loader: Add -s and -i options, Sascha Hauer
  • [PATCH 03/23] hab: Add HABv3 status report function, Sascha Hauer
  • [PATCH 20/23] scripts: imx-image: Support adding a Super Root Key to the image, Sascha Hauer
  • [PATCH 11/23] scripts: imx-image: move write_mem to context data, Sascha Hauer
  • [PATCH 07/23] scripts: imx-usb-loader: fully read images into memory, Sascha Hauer
  • [PATCH 17/23] scripts: imx: Drop double check, Sascha Hauer
  • [PATCH 18/23] scripts: imx-image: move more variables to context data, Sascha Hauer
  • [PATCH 19/23] scripts: imx-image: pass config data to add_header_*, Sascha Hauer
  • [PATCH 08/23] scripts: imx-usb-loader: Move load_file up, Sascha Hauer
  • [PATCH 22/23] scripts: imx: Allow to create signed images, Sascha Hauer
  • [PATCH 09/23] scripts: imx: Consolidate flash headers in imx tools, Sascha Hauer
  • [PATCH 23/23] scripts: imx: Generate signed images with imx-image, Sascha Hauer
  • [PATCH 14/23] scripts: imx: move config file parser to separate file, Sascha Hauer
  • [PATCH 21/23] scripts: imx: Create CSF files from imx config file, Sascha Hauer
  • [PATCH 02/23] imx: hab: rename driver dir to hab/, Sascha Hauer
  • [PATCH 15/23] scripts: imx: make libusb variables global, Sascha Hauer
• [PATCH 1/5] Introduce include/linux/sched.h, yegorslists
  • [PATCH 2/5] Introduce include/linux/spinlock.h, yegorslists
  • [PATCH 3/5] Introduce include/linux/mutex.h, yegorslists
  • [PATCH 5/5] Introduce include/linux/rwsem.h, yegorslists
  • [PATCH 4/5] Introduce include/linux/wait.h, yegorslists
  • Re: [PATCH 1/5] Introduce include/linux/sched.h, Sascha Hauer
• [PATCH 1/8] fs: move PAGE_CACHE definitions to include/linux/pagemap.h, yegorslists
  • [PATCH 2/8] fs: ubifs: remove redundant macro defines, yegorslists
  • [PATCH 3/8] fs: use linux/fs.h for file system related definitions, yegorslists
  • [PATCH 4/8] fs: move pgoff_t definition to include/linux/types.h, yegorslists
  • [PATCH 5/8] fs: ubifs: move dcache related definitions to include/linux/dcache.h, yegorslists
  • [PATCH 7/8] fs: ubifs: move path definition to include/linux/path.h, yegorslists
  • [PATCH 6/8] fs: ubifs: move vfsmount definition to include/linux/mount.h, yegorslists
  • [PATCH 8/8] fs: ubifs: move file and file_system_type definitions to linux/fs.h, yegorslists
  • Re: [PATCH 1/8] fs: move PAGE_CACHE definitions to include/linux/pagemap.h, Sascha Hauer
• Linux headers, Yegor Yefremov
  • Re: Linux headers, Sascha Hauer
• [PATCH 1/3] fs: move struct timespec to include/linux/time.h, yegorslists
  • [PATCH 2/3] fs: introduce include/linux/fs.h, yegorslists
  • [PATCH 3/3] fs: import magic.h from Linux kernel, yegorslists
  • Re: [PATCH 1/3] fs: move struct timespec to include/linux/time.h, Sascha Hauer
• scripts/remote: make clean leftovers, Yegor Yefremov
  • Re: scripts/remote: make clean leftovers, Jan Lübbe
    • Re: scripts/remote: make clean leftovers, Sascha Hauer
      • Re: scripts/remote: make clean leftovers, Jan Lübbe
• [PATCH] bootm: add missing curly brace, yegorslists
  • Re: [PATCH] bootm: add missing curly brace, Sascha Hauer
• [PATCH 1/7] include/linux/phy.h: Add MII_ADDR_C45, Andrey Smirnov
  • [PATCH 4/7] mdio_bus: Change dev_info to dev_dbg, Andrey Smirnov
  • [PATCH 3/7] miitool: Fix PHY argument handling, Andrey Smirnov
  • [PATCH 2/7] net: Port bitbanged MDIO code from Linux kernel, Andrey Smirnov
  • [PATCH 6/7] miitool: Don't print negative parent IDs, Andrey Smirnov
  • [PATCH 5/7] mdio_bus: Add mdiobus_get_bus() function, Andrey Smirnov
  • [PATCH 7/7] commands: Add mdio_read and mdio_write, Andrey Smirnov
    • Re: [PATCH 7/7] commands: Add mdio_read and mdio_write, Sascha Hauer
      • Re: [PATCH 7/7] commands: Add mdio_read and mdio_write, Andrey Smirnov
        • Re: [PATCH 7/7] commands: Add mdio_read and mdio_write, Trent Piepho
          • Re: [PATCH 7/7] commands: Add mdio_read and mdio_write, Sascha Hauer
        • Re: [PATCH 7/7] commands: Add mdio_read and mdio_write, Sascha Hauer
          • Re: [PATCH 7/7] commands: Add mdio_read and mdio_write, Andrey Smirnov
• Barebox vs Raspberry PI, support
  • Re: Barebox vs Raspberry PI, Antony Pavlov
• [PATCH] arm: imx53-guf-vincell-lt: dts: do not specfiy fixed memory information, Enrico Jorns
  • Re: [PATCH] arm: imx53-guf-vincell-lt: dts: do not specfiy fixed memory information, Sascha Hauer
• [PATCH v2 1/2] arm: am33xx: Move function to read from Master OSC, Teresa Remmet
  • [PATCH v2 2/2] arm: am33xx: Master Osc clock speed handling, Teresa Remmet
  • Re: [PATCH v2 1/2] arm: am33xx: Move function to read from Master OSC, Sascha Hauer
• [RFC] fs: move super_block and inode definitions to central fs.h header, Yegor Yefremov
  • Re: [RFC] fs: move super_block and inode definitions to central fs.h header, Yegor Yefremov
    • Re: [RFC] fs: move super_block and inode definitions to central fs.h header, Sascha Hauer
      • Re: [RFC] fs: move super_block and inode definitions to central fs.h header, Yegor Yefremov
        • Re: [RFC] fs: move super_block and inode definitions to central fs.h header, Sascha Hauer
          • Re: [RFC] fs: move super_block and inode definitions to central fs.h header, Yegor Yefremov
• [PATCH v3] kwboot: do a filetype check before sending the image, Uwe Kleine-König
  • Re: [PATCH v3] kwboot: do a filetype check before sending the image, Sascha Hauer
• [PATCH v4] FIT support, Sascha Hauer
  • [PATCH 03/14] bootm: introduce bootm_get_os_size, Sascha Hauer
  • [PATCH 02/14] bootm: Do not call uimage_close twice, Sascha Hauer
  • [PATCH 09/14] bootm: Initialize bootm_data defaults in single place, Sascha Hauer
  • [PATCH 14/14] bootm: Add option to force booting signed images, Sascha Hauer
  • [PATCH 07/14] bootm: move initrd code together, Sascha Hauer
  • [PATCH 01/14] ARM: zImage: add missing free() in appended device tree code, Sascha Hauer
  • [PATCH 08/14] bootm: move oftree code together, Sascha Hauer
  • [PATCH 11/14] crypto: add RSA support, Sascha Hauer
  • [PATCH 05/14] ARM: bootm: Use kernel handler to start barebox image, Sascha Hauer
  • [PATCH 13/14] bootm: add initial FIT support, Sascha Hauer
  • [PATCH 10/14] crypto: add digest_alloc_by_algo(), Sascha Hauer
  • [PATCH 12/14] bootm: make verifying/hashing configurable, Sascha Hauer
  • [PATCH 04/14] bootm: use names instead of numbers for image parts, Sascha Hauer
  • [PATCH 06/14] bootm: Push dryrun to handlers, Sascha Hauer
• [PATCH v2 0/3] i.MX6: CAAM engine support, Steffen Trumtrar
  • [PATCH v2 3/3] crypto: caam: add RNG support, Steffen Trumtrar
  • [PATCH v2 1/3] include: linux: add circular buffers, Steffen Trumtrar
  • [PATCH v2 2/3] crypto: add i.MX6 CAAM support, Steffen Trumtrar
    • Re: [PATCH v2 2/3] crypto: add i.MX6 CAAM support, Steffen Trumtrar
• [PATCH] ARM: cm-fx6: set proper hostname, Philipp Zabel
  • Re: [PATCH] ARM: cm-fx6: set proper hostname, Sascha Hauer
• [PATCH v2] kwboot: do a filetype check before sending the image, Uwe Kleine-König
  • Re: [PATCH v2] kwboot: do a filetype check before sending the image, Sebastian Hesselbarth
  • Re: [PATCH v2] kwboot: do a filetype check before sending the image, Trent Piepho
    • Re: [PATCH v2] kwboot: do a filetype check before sending the image, Uwe Kleine-König
      • Re: [PATCH v2] kwboot: do a filetype check before sending the image, Trent Piepho
• [PATCH] Add initial support for Netgear ReadyNAS 104, Uwe Kleine-König
  • Re: [PATCH] Add initial support for Netgear ReadyNAS 104, Sascha Hauer
• [PATCH] kwboot: do a filetype check before sending the image, Uwe Kleine-König
  • Re: [PATCH] kwboot: do a filetype check before sending the image, Sascha Hauer
• [PATCH 1/2] arm: am33xx: Move function to read from Master OSC, Teresa Remmet
  • [PATCH 2/2] arm: am33xx: Master Osc clock speed handling, Teresa Remmet
    • Re: [PATCH 2/2] arm: am33xx: Master Osc clock speed handling, Sascha Hauer
  • Re: [PATCH 1/2] arm: am33xx: Move function to read from Master OSC, Sascha Hauer
• [PATCH] bootm: Add option to force booting signed images, Sascha Hauer
  • Re: [PATCH] bootm: Add option to force booting signed images, Yegor Yefremov
    • Re: [PATCH] bootm: Add option to force booting signed images, Sascha Hauer
• [RFC] usb: port UHCI driver from the u-boot, pmamonov
  • Re: [RFC] usb: port UHCI driver from the u-boot, Sascha Hauer
• [PATCH] ARM: PXA: move HAVE_CLK select, Lucas Stach
  • Re: [PATCH] ARM: PXA: move HAVE_CLK select, Sascha Hauer
    • Re: [PATCH] ARM: PXA: move HAVE_CLK select, Sascha Hauer
• [PATCH 19/20] e1000: Expose i210's external flash as MTD, Andrey Smirnov
• [PATCH 20/20] e1000: Expose i210's iNVM as a cdev, Andrey Smirnov
• [PATCH 18/20] e1000: Add EEPROM access locking for i210, Andrey Smirnov
• [PATCH 15/20] e1000: Refactor Flash/EEPROM reading code, Andrey Smirnov
• [PATCH 16/20] e1000: Add functions for register polling, Andrey Smirnov
  • Re: [PATCH 16/20] e1000: Add functions for register polling, Sascha Hauer
    • Re: [PATCH 16/20] e1000: Add functions for register polling, Andrey Smirnov
      • Re: [PATCH 16/20] e1000: Add functions for register polling, Sascha Hauer
• [PATCH 17/20] e1000: Properly release SW_FW_SYNC semaphore bits, Andrey Smirnov
• [PATCH 13/20] e1000: Fix a bug in e1000_probe(), Andrey Smirnov
• [PATCH 07/20] e1000: Remove 'use_eewr' parameter, Andrey Smirnov
• [PATCH 08/20] e1000: Remove 'page_size', Andrey Smirnov
• [PATCH 12/20] e1000: Consolidate Microwire EEPROM init code, Andrey Smirnov
• [PATCH 11/20] e1000: Consolidate SPI EEPROM init code, Andrey Smirnov
• [PATCH 09/20] e1000: Simplify EEPROM init for e1000_80003es2lan, Andrey Smirnov
• [PATCH 05/20] e1000: Remove unneeded i210 specific register code, Andrey Smirnov
• [PATCH 06/20] e1000: Consolidate register offset fixups, Andrey Smirnov
• [PATCH 14/20] e1000: Remove unnecessary intialization, Andrey Smirnov
• [PATCH 04/20] e1000: Do not read same register twice, Andrey Smirnov
• [PATCH 10/20] e1000: Simplify EEPROM init for e1000_igb, Andrey Smirnov
• [PATCH 03/20] e1000: Remove unnecessary variable, Andrey Smirnov
• [PATCH 02/20] e1000: Fix a bug in e1000_detect_gig_phy, Andrey Smirnov
• [PATCH] fixup! input: gpio-keys: convert to input framework, Marc Kleine-Budde
  • Re: [PATCH] fixup! input: gpio-keys: convert to input framework, Sascha Hauer
• [PATCH v3] FIT support, Sascha Hauer
  • [PATCH 02/13] bootm: Do not call uimage_close twice, Sascha Hauer
  • [PATCH 03/13] bootm: introduce bootm_get_os_size, Sascha Hauer
  • [PATCH 09/13] bootm: Initialize bootm_data defaults in single place, Sascha Hauer
  • [PATCH 05/13] ARM: bootm: Use kernel handler to start barebox image, Sascha Hauer
  • [PATCH 01/13] ARM: zImage: add missing free() in appended device tree code, Sascha Hauer
  • [PATCH 06/13] bootm: Push dryrun to handlers, Sascha Hauer
  • [PATCH 08/13] bootm: move oftree code together, Sascha Hauer
  • [PATCH 04/13] bootm: use names instead of numbers for image parts, Sascha Hauer
  • [PATCH 07/13] bootm: move initrd code together, Sascha Hauer
  • [PATCH 12/13] bootm: make verifying/hashing configurable, Sascha Hauer
  • [PATCH 11/13] crypto: add RSA support, Sascha Hauer
  • [PATCH 10/13] crypto: add digest_alloc_by_algo(), Sascha Hauer
  • [PATCH 13/13] bootm: add initial FIT support, Sascha Hauer
    • Re: [PATCH 13/13] bootm: add initial FIT support, Holger Schurig
      • Re: [PATCH 13/13] bootm: add initial FIT support, Sascha Hauer
  • Re: [PATCH v3] FIT support, Yegor Yefremov
• [PATCH 1/2] vsprintf: Add support for %pa, Sascha Hauer
  • [PATCH 2/2] Convert users of PRINTF_CONVERSION_RESOURCE to %pa, Sascha Hauer
• Re: Verified boot support with FIT, Marc Kleine-Budde
  • Re: Verified boot support with FIT, Jan Lübbe
    • Re: Verified boot support with FIT, Simon Glass
  • <Possible follow-ups>
  • Verified boot support with FIT, Simon Glass
• [PATCH] state: hmac: fix error message that algo is displayed, Marc Kleine-Budde
  • Re: [PATCH] state: hmac: fix error message that algo is displayed, Sascha Hauer
• [PATCH] input core, Sascha Hauer
  • [PATCH 11/15] input: imx-keypad: convert to input framework, Sascha Hauer
  • [PATCH 02/15] keymap: Fix braces, Sascha Hauer
  • [PATCH 10/15] input: move matrix_keypad_build_keymap() to C file, Sascha Hauer
  • [PATCH 05/15] keymap: Add apostrophe, backslash and home, Sascha Hauer
  • [PATCH 04/15] keymap: Add keypad keys, Sascha Hauer
  • [PATCH 12/15] input: Add device tree parsing support for matrix keymap, Sascha Hauer
  • [PATCH 03/15] keymap: remove exotic and nonprintable keys, Sascha Hauer
  • [PATCH 01/15] poller: Fix async poller, Sascha Hauer
  • [PATCH 06/15] keymap: Add keymap for keys with shift pressed, Sascha Hauer
  • [PATCH 15/15] input: gpio-keys: convert to input framework, Sascha Hauer
  • [PATCH 13/15] input: imx-keypad: Add device tree support, Sascha Hauer
  • [PATCH 09/15] input: imx-keypad: Use dev_* functions, Sascha Hauer
  • [PATCH 07/15] input: Add input core, Sascha Hauer
    • Re: [PATCH 07/15] input: Add input core, Antony Pavlov
      • Re: [PATCH 07/15] input: Add input core, Sascha Hauer
  • [PATCH 14/15] input: gpio-keys: Use KEY_* keycodes, Sascha Hauer
  • [PATCH 08/15] input: usb keyboard: convert to input framework, Sascha Hauer
• [PATCH] ARM: tegra: clean up lowlevel entry, Lucas Stach
  • Re: [PATCH] ARM: tegra: clean up lowlevel entry, Sascha Hauer
• [PATCH v2 1/2] of: rework of_node_cmp() to support short and full node names, yegorslists
  • [PATCH v2 2/2] FIT: bootm: accept configuration name as string, yegorslists
  • Re: [PATCH v2 1/2] of: rework of_node_cmp() to support short and full node names, Sascha Hauer
    • Re: [PATCH v2 1/2] of: rework of_node_cmp() to support short and full node names, Yegor Yefremov
• [PATCH] imx233-olinuxino: Fix mx23_power_init() arguments, Fabio Estevam
  • Re: [PATCH] imx233-olinuxino: Fix mx23_power_init() arguments, Sascha Hauer
• [BUG] barebox won't boot from SD card on iMX233-OLinuXino-MAXI, Peter Mamonov
  • Re: [BUG] barebox won't boot from SD card on iMX233-OLinuXino-MAXI, Fabio Estevam
    • Re: [BUG] barebox won't boot from SD card on iMX233-OLinuXino-MAXI, Peter Mamonov
• [PATCH] FIT: bootm: accept configuration name as string, yegorslists
  • Re: [PATCH] FIT: bootm: accept configuration name as string, Trent Piepho
• [PATCH] hush: fix indentation, Sascha Hauer
• [PATCH] hush: Initialize struct p_context, Sascha Hauer
• v2016.01.0, Sascha Hauer
• [PATCH v2] FIT: make RSA signature verification configurable, yegorslists
• [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR, Andrey Smirnov
  • [PATCH 2/3] ARM: mmu: Add VBAR setup, Andrey Smirnov
  • [PATCH 3/3] ARM: Fix exception table setup in MMU-less mode, Andrey Smirnov
  • Re: [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR, Sascha Hauer
    • Re: [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR, Andrey Smirnov
      • Re: [PATCH v2 1/3] ARM: asm: Add convenience fucntions to access VBAR, Sascha Hauer
• [PATCH] reset: fix non GPIO reset, Lucas Stach
  • Re: [PATCH] reset: fix non GPIO reset, Sascha Hauer
• [PATCH] FIT: make RSA signature verification configurable, yegorslists
  • Re: [PATCH] FIT: make RSA signature verification configurable, Marc Kleine-Budde
    • Re: [PATCH] FIT: make RSA signature verification configurable, Yegor Yefremov
      • Re: [PATCH] FIT: make RSA signature verification configurable, Marc Kleine-Budde
      • Re: [PATCH] FIT: make RSA signature verification configurable, Sascha Hauer
• [PATCH] remote control support, Sascha Hauer
  • [PATCH 7/8] defaultenv2: Add automount for RATPFS, Sascha Hauer
  • [PATCH 8/8] barebox remote control: Documentation, Sascha Hauer
    • Re: [PATCH 8/8] barebox remote control: Documentation, Andrey Smirnov
      • Re: [PATCH 8/8] barebox remote control: Documentation, Sascha Hauer
  • [PATCH 5/8] pyserial: decrease timeouts, Sascha Hauer
  • [PATCH 3/8] fs: Add RATP fs support, Sascha Hauer
    • Re: [PATCH 3/8] fs: Add RATP fs support, Andrey Smirnov
  • [PATCH 2/8] barebox remote control, Sascha Hauer
    • Re: [PATCH 2/8] barebox remote control, Andrey Smirnov
      • Re: [PATCH 2/8] barebox remote control, Sascha Hauer
        • Re: [PATCH 2/8] barebox remote control, Andrey Smirnov
    • Re: [PATCH 2/8] barebox remote control, Andrey Smirnov
  • [PATCH 6/8] host side for barebox remote control, Sascha Hauer
    • Re: [PATCH 6/8] host side for barebox remote control, Andrey Smirnov
      • Re: [PATCH 6/8] host side for barebox remote control, Jan Lübbe
  • [PATCH 1/8] Add Reliable Asynchronous Transfer Protocol, Sascha Hauer
    • Re: [PATCH 1/8] Add Reliable Asynchronous Transfer Protocol, Andrey Smirnov
  • [PATCH 4/8] include pyserial trunk, Sascha Hauer
    • Re: [PATCH 4/8] include pyserial trunk, Yegor Yefremov
      • Re: [PATCH 4/8] include pyserial trunk, Sascha Hauer
• [PATCH] fs: automount: Make automountpoints persistent, Sascha Hauer
• [PATCH] of_path: Make partition names work again, Sascha Hauer
  • Re: [PATCH] of_path: Make partition names work again, Trent Piepho
    • Re: [PATCH] of_path: Make partition names work again, Sascha Hauer
• [PATCH] usb: chipidea-imx: check return value of regulator_get(), Lucas Stach
  • Re: [PATCH] usb: chipidea-imx: check return value of regulator_get(), Sascha Hauer
• [PATCH] PCI: imx6: properly shut down core when leaving barebox, Lucas Stach
  • Re: [PATCH] PCI: imx6: properly shut down core when leaving barebox, Sascha Hauer
• [PATCH 1/6] rtc: ds1307: Add code to support ds1337/1341, Andrey Smirnov
  • [PATCH 3/6] rtc-lib: Check tm_wday for validity in rtc_valid_tm(), Andrey Smirnov
    • Re: [PATCH 3/6] rtc-lib: Check tm_wday for validity in rtc_valid_tm(), Antony Pavlov
      • Re: [PATCH 3/6] rtc-lib: Check tm_wday for validity in rtc_valid_tm(), Andrey Smirnov
  • [PATCH 6/6] commands/hwclock: Check return value of rtc_read_time(), Andrey Smirnov
    • Re: [PATCH 6/6] commands/hwclock: Check return value of rtc_read_time(), Antony Pavlov
  • [PATCH 5/6] common/date.c: Fix off-by-one error, Andrey Smirnov
    • Re: [PATCH 5/6] common/date.c: Fix off-by-one error, Sascha Hauer
  • [PATCH 2/6] rtc: ds1307: Fix a memory leak, Andrey Smirnov
  • Re: [PATCH 1/6] rtc: ds1307: Add code to support ds1337/1341, Antony Pavlov
  • Re: [PATCH 1/6] rtc: ds1307: Add code to support ds1337/1341, Sascha Hauer
• [PATCH v2 0/3] FIT Support, Marc Kleine-Budde
  • [PATCH v2 2/3] crypto: add RSA support, Marc Kleine-Budde
    • Re: [PATCH v2 2/3] crypto: add RSA support, Trent Piepho
      • Re: [PATCH v2 2/3] crypto: add RSA support, Sascha Hauer
  • [PATCH v2 3/3] bootm: add initial FIT support, Marc Kleine-Budde
    • Re: [PATCH v2 3/3] bootm: add initial FIT support, Sascha Hauer
  • [PATCH v2 1/3] crypto: add digest_alloc_by_algo(), Marc Kleine-Budde
• FIT support: node syntax, Yegor Yefremov
• [PATCH 1/2] readline: Fix potential buffer overflow, Sascha Hauer
  • [PATCH 2/2] readline: Fix potential buffer overflow in command history, Sascha Hauer
• [PATCH 0/3] FIT Support, Marc Kleine-Budde
  • [PATCH 1/3] crypto: add enum, Marc Kleine-Budde
    • Re: [PATCH 1/3] crypto: add enum, Sam Ravnborg
      • Re: [PATCH 1/3] crypto: add enum, Marc Kleine-Budde
        • Re: [PATCH 1/3] crypto: add enum, Sam Ravnborg
  • [PATCH 3/3] bootm: add initial FIT support, Marc Kleine-Budde
    • Re: [PATCH 3/3] bootm: add initial FIT support, Yegor Yefremov
      • Re: [PATCH 3/3] bootm: add initial FIT support, Marc Kleine-Budde
        • Re: [PATCH 3/3] bootm: add initial FIT support, Yegor Yefremov
          • Re: [PATCH 3/3] bootm: add initial FIT support, Marc Kleine-Budde
            • Re: [PATCH 3/3] bootm: add initial FIT support, Yegor Yefremov
              • Re: [PATCH 3/3] bootm: add initial FIT support, Marc Kleine-Budde
                • Re: [PATCH 3/3] bootm: add initial FIT support, Yegor Yefremov
                • Re: [PATCH 3/3] bootm: add initial FIT support, Jan Lübbe
                  • Re: [PATCH 3/3] bootm: add initial FIT support, Yegor Yefremov
    • Re: [PATCH 3/3] bootm: add initial FIT support, Trent Piepho
      • Re: [PATCH 3/3] bootm: add initial FIT support, Marc Kleine-Budde
        • Re: [PATCH 3/3] bootm: add initial FIT support, Jan Lübbe
  • [PATCH 2/3] crypto: add RSA support, Marc Kleine-Budde
• [PATCH 1/6] ARM: asm: Add convenience fucntions to access VBAR, Andrey Smirnov
  • [PATCH 4/6] i.MX6: pci: Replace magic number with a named constant, Andrey Smirnov
    • Re: [PATCH 4/6] i.MX6: pci: Replace magic number with a named constant, Lucas Stach
      • Re: [PATCH 4/6] i.MX6: pci: Replace magic number with a named constant, Sascha Hauer
  • [PATCH 5/6] i.MX6: pci: Reconcile imx6_pcie_start_link with the kernel code, Andrey Smirnov
    • Re: [PATCH 5/6] i.MX6: pci: Reconcile imx6_pcie_start_link with the kernel code, Lucas Stach
  • [PATCH 2/6] ARM: mmu: Add VBAR setup, Andrey Smirnov
    • Re: [PATCH 2/6] ARM: mmu: Add VBAR setup, Sascha Hauer
  • [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode, Andrey Smirnov
    • Re: [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode, Sascha Hauer
      • Re: [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode, Andrey Smirnov
        • Re: [PATCH 3/6] ARM: Fix exception table setup in MMU-less mode, Sascha Hauer
  • [PATCH 6/6] i.MX6: pci: Avoid aborts when asserting PCIe reset, Andrey Smirnov
    • Re: [PATCH 6/6] i.MX6: pci: Avoid aborts when asserting PCIe reset, Sascha Hauer
    • Re: [PATCH 6/6] i.MX6: pci: Avoid aborts when asserting PCIe reset, Lucas Stach
• Patchwork for Barebox, Yegor Yefremov
  • Re: Patchwork for Barebox, Sascha Hauer
    • Re: Patchwork for Barebox, Yegor Yefremov
• [RFC] device probe order, Peter Mamonov
  • Re: [RFC] device probe order, Alexander Aring
    • Re: [RFC] device probe order, Peter Mamonov
      • Re: [RFC] device probe order, Alexander Aring
        • Re: [RFC] device probe order, Peter Mamonov
          • Re: [RFC] device probe order, Peter Mamonov
            • Re: [RFC] device probe order, Sascha Hauer
  • Re: [RFC] device probe order, Sascha Hauer
    • Re: [RFC] device probe order, Peter Mamonov
      • Re: [RFC] device probe order, Alexander Aring
        • Re: [RFC] device probe order, Peter Mamonov
          • Re: [RFC] device probe order, Alexander Aring
• [PATCH 1/2] mtd: nand: Add erased page bitflip check helper functions, Markus Pargmann
  • [PATCH 2/2] mtd: gpmi: Add erased page bitflip correction, Markus Pargmann
  • Re: [PATCH 1/2] mtd: nand: Add erased page bitflip check helper functions, Sascha Hauer
• [PATCH 0/7] bcm283x: add support for raspberry pi 2, Alexander Aring
  • [PATCH 2/7] led: add missing includes, Alexander Aring
  • [PATCH 3/7] arm: bcm2835: fix indentation, Alexander Aring
  • [PATCH 1/7] memtest: fix missing arguments in help string, Alexander Aring
  • [PATCH 7/7] arm: bcm283x: add rpi2 support, Alexander Aring
  • [PATCH 4/7] bcm2835: introduce mach-bcm283x, Alexander Aring
  • [PATCH 5/7] bcm283x: mbox: align to cachesize, Alexander Aring
  • [PATCH 6/7] rpi: sync revision detection with u-boot, Alexander Aring
  • Re: [PATCH 0/7] bcm283x: add support for raspberry pi 2, Sascha Hauer
• [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Trent Piepho
  • [PATCH 2/2] of: Add of_property_for_each_phandle() iterator, Trent Piepho
  • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Sascha Hauer
    • [PATCH 1/2] OF: fix typo in for_each_compatible_node(), Trent Piepho
      • Re: [PATCH 1/2] OF: fix typo in for_each_compatible_node(), Sascha Hauer
    • [PATCH 2/2] OF: Fix fixups to fix Linux DT instead of Barebox DT, Trent Piepho
      • Re: [PATCH 2/2] OF: Fix fixups to fix Linux DT instead of Barebox DT, Sascha Hauer
    • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Trent Piepho
      • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Sascha Hauer
        • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Yegor Yefremov
          • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Sascha Hauer
            • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Yegor Yefremov
        • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Trent Piepho
          • Re: [PATCH 1/2] of: Add for_each_compatible_node_from iterator, Sascha Hauer
• [PATCH 1/4] partitions/efi: Add partuuid to partition description, Trent Piepho
  • [PATCH 2/4] of_path: Fix bug with partitions, simply code, Trent Piepho
  • [PATCH 3/4] environment: Support env from file in a file-system via device tree, Trent Piepho
  • [PATCH 4/4] socfpga: Find partition with environment via device tree, Trent Piepho
    • Re: [PATCH 4/4] socfpga: Find partition with environment via device tree, Sascha Hauer
      • Re: [PATCH 4/4] socfpga: Find partition with environment via device tree, Trent Piepho
        • Re: [PATCH 4/4] socfpga: Find partition with environment via device tree, Sascha Hauer
• [PATCH] environment: allow saving of symbolic link changes, Zahari Doychev
  • Re: [PATCH] environment: allow saving of symbolic link changes, Sascha Hauer
• [PATCH v2] Symlink support for devfs, Sascha Hauer
  • [PATCH 2/2] partition: Create links with partition names, Sascha Hauer
  • [PATCH 1/2] devfs: Add symlink support, Sascha Hauer
• [PATCH] imx-usb-loader: Add i.MX6ul support, Florian Vallee
  • Re: [PATCH] imx-usb-loader: Add i.MX6ul support, Sascha Hauer
• [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver, Florian Vallee
  • Re: [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver, Antony Pavlov
  • Re: [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver, Trent Piepho
    • Re: [PATCH v2] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver, Florian Vallée
• [PATCH] state: implement signed int support, Sascha Hauer
• [PATCH] input: gpio-keys: implement debouncing, Sascha Hauer
• [PATCH 1/7] hwclock command: use format like the Linux tool does, Sascha Hauer
  • [PATCH 2/7] hwclock command: forward return value of rtc_set_time, Sascha Hauer
  • [PATCH 7/7] rtc: Add Abracon driver, Sascha Hauer
  • [PATCH 6/7] hwclock: Allow to set hwclock from sntp, Sascha Hauer
  • [PATCH 3/7] rtc: Check time for validity before passing it to the rtc driver, Sascha Hauer
  • [PATCH 4/7] rtc: Fill in weekdays before setting time, Sascha Hauer
  • [PATCH 5/7] net: Add SNTP support, Sascha Hauer
  • Re: [PATCH 1/7] hwclock command: use format like the Linux tool does, Fabio Estevam
    • Re: [PATCH 1/7] hwclock command: use format like the Linux tool does, Sascha Hauer
• [PATCH 1/4] net: dhcp: unify options and params, Sascha Hauer
  • [PATCH 3/4] net: dhcp: make unmodified variable const, Sascha Hauer
  • [PATCH 2/4] net: dhcp: simplify dhcp_options_process, Sascha Hauer
  • [PATCH 4/4] net: resolv: Make argument const, Sascha Hauer
• [PATCH 1/2] environment: Support env from file in a file-system via device tree, Trent Piepho
  • Re: [PATCH 1/2] environment: Support env from file in a file-system via device tree, Trent Piepho
    • Re: [PATCH 1/2] environment: Support env from file in a file-system via device tree, Sascha Hauer
      • Re: [PATCH 1/2] environment: Support env from file in a file-system via device tree, Trent Piepho
        • Re: [PATCH 1/2] environment: Support env from file in a file-system via device tree, Sascha Hauer
• [PATCH 1/2] devfs: Add symlink support, Sascha Hauer
  • [PATCH 2/2] partition: Create links with partition names, Sascha Hauer
    • Re: [PATCH 2/2] partition: Create links with partition names, Trent Piepho
      • Re: [PATCH 2/2] partition: Create links with partition names, Sascha Hauer
        • Re: [PATCH 2/2] partition: Create links with partition names, Trent Piepho
• [PATCH] socfpga: Find partition with environment via device tree, Trent Piepho
  • Re: [PATCH] socfpga: Find partition with environment via device tree, Sascha Hauer
    • Re: [PATCH] socfpga: Find partition with environment via device tree, Trent Piepho
      • Re: [PATCH] socfpga: Find partition with environment via device tree, Sascha Hauer
        • Re: [PATCH] socfpga: Find partition with environment via device tree, Trent Piepho
          • Re: [PATCH] socfpga: Find partition with environment via device tree, Sascha Hauer
• [PATCH] cdev: When creating a new cdev, initialize device_node, Trent Piepho
  • Re: [PATCH] cdev: When creating a new cdev, initialize device_node, Sascha Hauer
• [PATCH] socfpga: Allow setting partition xloader boots from for mmc, Trent Piepho
  • Re: [PATCH] socfpga: Allow setting partition xloader boots from for mmc, Sascha Hauer
    • Re: [PATCH] socfpga: Allow setting partition xloader boots from for mmc, Trent Piepho
  • Re: [PATCH] socfpga: Allow setting partition xloader boots from for mmc, Sascha Hauer
• [PATCH] bootstrap: constify strings, Trent Piepho
  • Re: [PATCH] bootstrap: constify strings, Sascha Hauer
• [PATCH] bootstrap: Boot barebox with kernel calling convention, Trent Piepho
  • Re: [PATCH] bootstrap: Boot barebox with kernel calling convention, Sascha Hauer
  • Re: [PATCH] bootstrap: Boot barebox with kernel calling convention, Sascha Hauer
• [PATCH] ARM: i.MX6Q: Embedsky E9: Convert environment paths in DTS to a new bindings, Andrey Panov
  • Re: [PATCH] ARM: i.MX6Q: Embedsky E9: Convert environment paths in DTS to a new bindings, Sascha Hauer
• [PATCH] Documentation: Document pstore/RAMOOPS, Markus Pargmann
  • Re: [PATCH] Documentation: Document pstore/RAMOOPS, Sascha Hauer
• "make distclean" leaves a pile of arch/arm/dts/*.lzo files, Robert P. J. Day
  • Re: "make distclean" leaves a pile of arch/arm/dts/*.lzo files, Sascha Hauer
    • Re: "make distclean" leaves a pile of arch/arm/dts/*.lzo files, Robert P. J. Day
• Fix some gcc5 warnings, Sascha Hauer
  • [PATCH 2/3] linux/barebox-wrapper: Silence gcc5 warning, Sascha Hauer
    • Re: [PATCH 2/3] linux/barebox-wrapper: Silence gcc5 warning, Trent Piepho
      • Re: [PATCH 2/3] linux/barebox-wrapper: Silence gcc5 warning, Sascha Hauer
  • [PATCH 3/3] ARM: Omap3: Remove useless inline, Sascha Hauer
  • [PATCH 1/3] ubiformat: fix the subpage size hint on the error path, Sascha Hauer
• [PATCH 1/2] partitions: UUID was missing from partitions by name, Trent Piepho
  • [PATCH 2/2] partitions/efi: Add partuuid to partition description, Trent Piepho
    • Re: [PATCH 2/2 v2] partitions/efi: Add partuuid to partition description, Trent Piepho
  • Re: [PATCH 1/2] partitions: UUID was missing from partitions by name, Sascha Hauer
• [PATCH 1/2] ARM: ccxmx53: properly guard initcall for multiimage, Lucas Stach
  • [PATCH 2/2] MCI: init device_node for MCI mainarea cdev, Lucas Stach
  • Re: [PATCH 1/2] ARM: ccxmx53: properly guard initcall for multiimage, Sascha Hauer
• Messed up commit in master, Lucas Stach
  • Re: Messed up commit in master, Sascha Hauer
• [PATCH v2 0/9] RAMOOPS read support for Barebox, Markus Pargmann
  • [PATCH v2 3/9] printk: Add missing include/declaration, Markus Pargmann
  • [PATCH v2 1/9] arm: boards: karo-tx6x remove definition of DIV_ROUND_UP, Markus Pargmann
  • [PATCH v2 2/9] log2: Add missing __rounddown_pow_of_two(), Markus Pargmann
  • [PATCH v2 6/9] arm: Clarify memory layout calculation, Markus Pargmann
  • [PATCH v2 8/9] arm: Add RAMOOPS memory area, Markus Pargmann
  • [PATCH v2 7/9] arm: start: Add visible sdram region for barebox board data, Markus Pargmann
  • [PATCH v2 4/9] vsprintf: Add scnprintf from kernel, Markus Pargmann
  • [PATCH v2 9/9] fs: Add pstore filesystem, Markus Pargmann
    • Re: [PATCH v2 9/9] fs: Add pstore filesystem, Antony Pavlov
      • Re: [PATCH v2 9/9] fs: Add pstore filesystem, Markus Pargmann
  • [PATCH v2 5/9] lib: Import reed solomon code from kernel, Markus Pargmann
  • Re: [PATCH v2 0/9] RAMOOPS read support for Barebox, Sascha Hauer
• [RFC] iodevice support, Sascha Hauer
  • [PATCH 4/4] misc: Add PT100 temperature sensor support, Sascha Hauer
  • [PATCH 2/4] misc: Add basic LM75 temperature driver, Sascha Hauer
  • [PATCH 1/4] misc: Add iodevice support, Sascha Hauer
    • Re: [PATCH 1/4] misc: Add iodevice support, Trent Piepho
      • Re: [PATCH 1/4] misc: Add iodevice support, Sascha Hauer
  • [PATCH 3/4] misc: Add Microchip MCP342x support, Sascha Hauer
  • Re: [RFC] iodevice support, Andrey Smirnov
    • Re: [RFC] iodevice support, Sascha Hauer
• v2015.12.0, Sascha Hauer
• am335x: MLO and Barebox, Yegor Yefremov
  • Re: am335x: MLO and Barebox, Teresa Remmet
• [PATCH 1/7] imx: ocotp: Add code to initialize 'cdev->device_node', Andrey Smirnov
  • [PATCH 2/7] drivers: bus: Match against id_table first, Andrey Smirnov
  • [PATCH 5/7] commands: Add 'hwmon' command, Andrey Smirnov
    • Re: [PATCH 5/7] commands: Add 'hwmon' command, Antony Pavlov
  • [PATCH 7/7] hwmon: Port TEMPMON sensor driver, Andrey Smirnov
    • Re: [PATCH 7/7] hwmon: Port TEMPMON sensor driver, Trent Piepho
      • Re: [PATCH 7/7] hwmon: Port TEMPMON sensor driver, Andrey Smirnov
        • Re: [PATCH 7/7] hwmon: Port TEMPMON sensor driver, Trent Piepho
          • Re: [PATCH 7/7] hwmon: Port TEMPMON sensor driver, Andrey Smirnov
  • [PATCH 6/7] hwmon: Port Linux driver for LM75 sensor, Andrey Smirnov
  • [PATCH 3/7] i2c: Port two utility functions from Linux kernel, Andrey Smirnov
  • [PATCH 4/7] drivers: Introduce hardware monitoring subsystem, Andrey Smirnov
  • Re: [PATCH 1/7] imx: ocotp: Add code to initialize 'cdev->device_node', Sascha Hauer
    • Re: [PATCH 1/7] imx: ocotp: Add code to initialize 'cdev->device_node', Andrey Smirnov
• [PATCH] ARM: pxa: pxa2xx use PSPR for resume address, Robert Jarzmik
  • Re: [PATCH] ARM: pxa: pxa2xx use PSPR for resume address, Sascha Hauer
• [PATCH] net: smc1111: fix ethernet mac setting, Robert Jarzmik
  • Re: [PATCH] net: smc1111: fix ethernet mac setting, Sam Ravnborg
  • Re: [PATCH] net: smc1111: fix ethernet mac setting, Sascha Hauer
• [PATCH] ARM: Remove do_execute and thumb2_execute, Trent Piepho
  • Re: [PATCH] ARM: Remove do_execute and thumb2_execute, Sascha Hauer
• [PATCH 0/2] net: tap: trivial fixes, Antony Pavlov
  • [PATCH 2/2] net: tap: fix whitespaces, Antony Pavlov
  • [PATCH 1/2] net: tap: make locally used functions static, Antony Pavlov
  • Re: [PATCH 0/2] net: tap: trivial fixes, Sascha Hauer
• [PATCH] ARM: Remove kernel booting call for thumb2 mode, Trent Piepho
  • Re: [PATCH] ARM: Remove kernel booting call for thumb2 mode, Trent Piepho
    • Re: [PATCH] ARM: Remove kernel booting call for thumb2 mode, Sascha Hauer
      • Re: [PATCH] ARM: Remove kernel booting call for thumb2 mode, Trent Piepho
  • Re: [PATCH] ARM: Remove kernel booting call for thumb2 mode, Sascha Hauer
• [PATCH 0/9] RAMOOPS read support for Barebox, Markus Pargmann
  • [PATCH 8/9] arm: Add RAMOOPS memory area, Markus Pargmann
    • Re: [PATCH 8/9] arm: Add RAMOOPS memory area, Sascha Hauer
      • Re: [PATCH 8/9] arm: Add RAMOOPS memory area, Markus Pargmann
        • Re: [PATCH 8/9] arm: Add RAMOOPS memory area, Sascha Hauer
  • [PATCH 4/9] vsprintf: Add scnprintf from kernel, Markus Pargmann
  • [PATCH 1/9] arm: boards: karo-tx6x remove definition of DIV_ROUND_UP, Markus Pargmann
  • [PATCH 2/9] log2: Add missing __rounddown_pow_of_two(), Markus Pargmann
  • [PATCH 3/9] printk: Add missing include/declaration, Markus Pargmann
  • [PATCH 7/9] arm: start: Add visible sdram region for barebox board data, Markus Pargmann
  • [PATCH 6/9] arm: Clarify memory layout calculation, Markus Pargmann
    • Re: [PATCH 6/9] arm: Clarify memory layout calculation, Sascha Hauer
  • [PATCH 5/9] lib: Import reed solomon code from kernel, Markus Pargmann
    • Re: [PATCH 5/9] lib: Import reed solomon code from kernel, Sascha Hauer
      • Re: [PATCH 5/9] lib: Import reed solomon code from kernel, Markus Pargmann
  • [PATCH 9/9] fs: Add pstore filesystem, Markus Pargmann
    • Re: [PATCH 9/9] fs: Add pstore filesystem, Antony Pavlov
      • Re: [PATCH 9/9] fs: Add pstore filesystem, Markus Pargmann
• [RFC 0/2] imx_adc command for barebox, Florian Vallee
  • [RFC 2/2] drivers: imx_adc: repurpose driver as pure ADC, Florian Vallee
  • [RFC 1/2] drivers: imx_adc: import and adapt imx_adc from linux, Florian Vallee
  • Re: [RFC 0/2] imx_adc command for barebox, Sascha Hauer
• [PATCH] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver, Florian Vallee
  • Re: [PATCH] GPIO: add Microchip MCP23017 / MCP23008 GPIO driver, Sascha Hauer
• [PATCH 1/3] imx35: register usb-misc by default, Florian Vallee
  • [PATCH 2/3] eukrea-cpuimx35: setup usb through chipidea-imx driver, Florian Vallee
  • [PATCH 3/3] eukrea-cpuimx35: update defconfig, Florian Vallee
  • Re: [PATCH 1/3] imx35: register usb-misc by default, Sascha Hauer
• i.MX6 PCIe support, Andrey Smirnov
  • Re: i.MX6 PCIe support, Lucas Stach
    • Re: i.MX6 PCIe support, Andrey Smirnov
      • Re: i.MX6 PCIe support, Lucas Stach
        • Re: i.MX6 PCIe support, Andrey Smirnov
• rpi2 support, Dave Thompson
  • Re: rpi2 support, Alexander Aring
• [PATCH] driver: make all dev_request_mem_region_* routines MIPS compatible, yegorslists
  • Re: [PATCH] driver: make all dev_request_mem_region_* routines MIPS compatible, Sascha Hauer
• rpi 2 support ?, Dave Thompson
  • Re: rpi 2 support ?, Sascha Hauer
    • Re: rpi 2 support ?, Carlo Caione
• [PATCH] wdog: imx-wd: Fix imx soc reset, Stefan Christ
  • Re: [PATCH] wdog: imx-wd: Fix imx soc reset, Sascha Hauer
• [RFC] at24: get devfs name from dt aliase, Antony Pavlov
  • RE: [RFC] at24: get devfs name from dt aliase, Trent Piepho
    • Re: [RFC] at24: get devfs name from dt aliase, Sascha Hauer
      • Re: [RFC] at24: get devfs name from dt aliase, Trent Piepho
• [PATCH] environment: support env on at24 eeprom, Antony Pavlov
  • Re: [PATCH] environment: support env on at24 eeprom, Sascha Hauer
• [PATCH] eeprom: Support pagesize OF device tree property, Trent Piepho
  • Re: [PATCH] eeprom: Support pagesize OF device tree property, Sascha Hauer
• [PATCH] MIPS: import optimized string functions from Linux, Aleksey Kuleshov
  • Re: [PATCH] MIPS: import optimized string functions from Linux, Antony Pavlov
  • <Possible follow-ups>
  • [PATCH] MIPS: import optimized string functions from Linux, Aleksey Kuleshov
    • Re: [PATCH] MIPS: import optimized string functions from Linux, Antony Pavlov
    • Re: [PATCH] MIPS: import optimized string functions from Linux, Antony Pavlov
    • Re: [PATCH] MIPS: import optimized string functions from Linux, Sascha Hauer
• [PATCH] eeprom: Add support for 24c1025 EEPROM, Trent Piepho
  • Re: [PATCH] eeprom: Add support for 24c1025 EEPROM, Sascha Hauer
• [PATCH] spi: i.MX: optimize transfers for ECSPI v2.3, Sascha Hauer
  • Re: [PATCH] spi: i.MX: optimize transfers for ECSPI v2.3, Uwe Kleine-König
    • Re: [PATCH] spi: i.MX: optimize transfers for ECSPI v2.3, Sascha Hauer
• [PATCH] mtd: core: initialize *retlen in mtd_write(), Sascha Hauer
• [PATCH 1/3] reset: Allow dummy reset lines, Sascha Hauer
  • [PATCH 3/3] reset: Add gpio reset support, Sascha Hauer
  • [PATCH 2/3] reset: Remove unused *_optional functions, Sascha Hauer
• [PATCH] video: pwm-backlight: Honour discrete brightness levels from dt, Sascha Hauer
• [PATCH] video: i.MX IPUv3: Set ldb clocks correctly, Sascha Hauer
• [just RFC 0/2] serial: ns16550: add Ralink UART support, Antony Pavlov
  • [just RFC 1/2] serial: ns16550: introduce custom divisor latch setter, Antony Pavlov
  • [just RFC 2/2] serial: ns16550: add Ralink UART support, Antony Pavlov
  • Re: [just RFC 0/2] serial: ns16550: add Ralink UART support, Sascha Hauer
• [PATCH] net: usb: asix: fix 'no previous prototype' warning, Antony Pavlov
  • Re: [PATCH] net: usb: asix: fix 'no previous prototype' warning, Sascha Hauer
• [PATCH] net: usb: asix: make rx_fixup ax_skb buffer aligned, Antony Pavlov
  • Re: [PATCH] net: usb: asix: make rx_fixup ax_skb buffer aligned, Sascha Hauer
• [RFC] regulator: add runtime disable/enable support, Alexander Aring
  • Re: [RFC] regulator: add runtime disable/enable support, Sascha Hauer
• [PATCH] fix warning: remove unused variable, Du Huanpeng
  • Re: [PATCH] fix warning: remove unused variable, Sascha Hauer
• [PATCH] font: fbconsole: add custom font supports, Du Huanpeng
  • Re: [PATCH] font: fbconsole: add custom font supports, Sascha Hauer
• [PATCH v2 00/19] Armada 370/XP NAND driver, Sebastian Hesselbarth
  • [PATCH v2 01/19] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux, Sebastian Hesselbarth
  • [PATCH v2 06/19] arm: pxa: Remove pxa_get_nandclk(), Sebastian Hesselbarth
  • [PATCH v2 10/19] mtd: nand_mrvl_nfc: Fix num-cs property parsing, Sebastian Hesselbarth
  • [PATCH v2 11/19] mtd: nand_mrvl_nfc: Get ecc parameters from DT, Sebastian Hesselbarth
  • [PATCH v2 02/19] mtd: nand: Clarify Marvell Orion Kconfig prompt, Sebastian Hesselbarth
  • [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths, Sebastian Hesselbarth
    • Re: [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths, Trent Piepho
      • Re: [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths, Sascha Hauer
  • [PATCH v2 14/19] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC, Sebastian Hesselbarth
  • [PATCH v2 05/19] mtd: nand_mrvl_nfc: Use common clock for core clock, Sebastian Hesselbarth
  • [PATCH v2 15/19] mtd: nand_mrvl_nfc: Add support for 8bit BCH HW ECC, Sebastian Hesselbarth
  • [PATCH v2 08/19] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase, Sebastian Hesselbarth
  • [PATCH v2 13/19] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions, Sebastian Hesselbarth
  • [PATCH v2 07/19] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00, Sebastian Hesselbarth
  • [PATCH v2 03/19] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx, Sebastian Hesselbarth
  • [PATCH v2 04/19] arm: pxa: Add clock for Zylonite NFC, Sebastian Hesselbarth
  • [PATCH v2 19/19] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U, Sebastian Hesselbarth
  • [PATCH v2 16/19] mtd: nand_mrvl_nfc: Add support for HW BCH ECC, Sebastian Hesselbarth
  • [PATCH v2 18/19] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP, Sebastian Hesselbarth
  • [PATCH v2 09/19] mtd: nand_mrvl_nfc: Protect mrvl_nand_probe_dt, Sebastian Hesselbarth
  • [PATCH v2 17/19] mtd: nand_mrvl_nfc: Add support for NDCB3 register, Sebastian Hesselbarth
  • Re: [PATCH v2 00/19] Armada 370/XP NAND driver, Sascha Hauer
• [PATCH] readline: Kconfig: fix typo, Wjatscheslaw Stoljarski
  • Re: [PATCH] readline: Kconfig: fix typo, Sascha Hauer
• [PATCH] state: make type check error verbose, Jan Remmet
  • Re: [PATCH] state: make type check error verbose, Sascha Hauer
• [PATCH v2] Add support for Digi ConnectCore ccxmx53 board., Jason Cobham
  • Re: [PATCH v2] Add support for Digi ConnectCore ccxmx53 board., Sascha Hauer
• [PATCH] i2c: core: Add client I2C address to devinfo, Trent Piepho
  • Re: [PATCH] i2c: core: Add client I2C address to devinfo, Sascha Hauer