Don't wait for more than one second for IP block to finish resetting. If
the block is dead it makes more sence to continue execution in hopes
that the rest of the processor is fine, rather than spin indefinetly
inside of the fec_probe function
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
drivers/net/fec_imx.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 46932fe..99bd179 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -687,6 +687,7 @@ static int fec_probe(struct device_d *dev)
int phy_reset;
u32 msec = 1;
struct resource *res;
+ u64 start;
ret = dev_get_drvdata(dev, (const void **)&type);
if (ret)
@@ -739,9 +740,14 @@ static int fec_probe(struct device_d *dev)
}
/* Reset chip. */
+ start = get_time_ns();
writel(FEC_ECNTRL_RESET, fec->regs + FEC_ECNTRL);
while(readl(fec->regs + FEC_ECNTRL) & FEC_ECNTRL_RESET) {
udelay(10);
+ if (is_timeout(start, SECOND)) {
+ ret = -ETIMEDOUT;
+ goto free_gpio;
+ }
}
/*
--
2.5.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
