U-Boot V2 Development (Barebox)

• Date Index

• LS1021A performance, Renaud Barbier
  • Re: LS1021A performance, Ahmad Fatoum
    • RE: LS1021A performance, Renaud Barbier
      • Re: LS1021A performance, Lucas Stach
        • RE: LS1021A performance, Renaud Barbier
• [PATCH 1/4] spi: add per-driver bits-per-word mask, Philipp Zabel
  • [PATCH 3/4] video: mipi_dbi: disable byte swapping if 16-bit SPI transfers are supported, Philipp Zabel
  • [PATCH 4/4] spi: update spi_board_info FIXME comment, Philipp Zabel
  • [PATCH 2/4] spi: stm32: support per-transfer bits per word switching, Philipp Zabel
    • Re: [PATCH 2/4] spi: stm32: support per-transfer bits per word switching, Philipp Zabel
      • Re: [PATCH 2/4] spi: stm32: support per-transfer bits per word switching, Sascha Hauer
• [PATCH 1/4] firmware: Add request/release_firmware() calls, Philipp Zabel
  • [PATCH 2/4] video: Add of_get_display_timing, Philipp Zabel
    • Re: [PATCH 2/4] video: Add of_get_display_timing, Ahmad Fatoum
  • [PATCH 3/4] video: add MIPI DBI framebuffer helpers, Philipp Zabel
    • Re: [PATCH 3/4] video: add MIPI DBI framebuffer helpers, Ahmad Fatoum
      • Re: [PATCH 3/4] video: add MIPI DBI framebuffer helpers, Philipp Zabel
  • [PATCH 4/4] video: Add MIPI DBI compatible SPI driver, Philipp Zabel
    • Re: [PATCH 4/4] video: Add MIPI DBI compatible SPI driver, Ahmad Fatoum
  • Re: [PATCH 1/4] firmware: Add request/release_firmware() calls, Ahmad Fatoum
• [PATCH] arm: rockchip: radxa-rock3: Fix SD/eMMC device numbers, Sascha Hauer
• [PATCH 1/2] mci: rockchip-dwcmshc-sdhci: use sdhci_reset(), Sascha Hauer
  • [PATCH 2/2] mci: arasan: use sdhci_reset(), Sascha Hauer
  • Re: [PATCH 1/2] mci: rockchip-dwcmshc-sdhci: use sdhci_reset(), Rouven Czerwinski
• [PATCH v2 0/6] ARM: Rockchip: Read amount of memory from DDR controller, Sascha Hauer
  • [PATCH v2 6/6] ARM: Rockchip: Do not pass device tree to TF-A, Sascha Hauer
  • [PATCH v2 1/6] ARM: dts: rk356x: Add DMC controller node, Sascha Hauer
  • [PATCH v2 3/6] ARM: Rockchip: Add rk3568 specific barebox entry function, Sascha Hauer
  • [PATCH v2 2/6] ARM: Rockchip: implement memory read out from controller, Sascha Hauer
    • Re: [PATCH v2 2/6] ARM: Rockchip: implement memory read out from controller, Sascha Hauer
    • Re: [PATCH v2 2/6] ARM: Rockchip: implement memory read out from controller, Sascha Hauer
      • Re: [PATCH v2 2/6] ARM: Rockchip: implement memory read out from controller, Michael Riesch
  • [PATCH v2 4/6] ARM: Rockchip: rk3568: use rk3568_barebox_entry(), Sascha Hauer
    • Re: [PATCH v2 4/6] ARM: Rockchip: rk3568: use rk3568_barebox_entry(), Sascha Hauer
  • [PATCH v2 5/6] ARM: Rockchip: make bootsource logic generic to all SoCs, Sascha Hauer
  • Re: [PATCH v2 0/6] ARM: Rockchip: Read amount of memory from DDR controller, Michael Riesch
    • Re: [PATCH v2 0/6] ARM: Rockchip: Read amount of memory from DDR controller, Sascha Hauer
      • Re: [PATCH v2 0/6] ARM: Rockchip: Read amount of memory from DDR controller, Michael Riesch
• [PATCH] Documentation: barebox environment: recommend a partition type GUID for GPT partitions, Marco Felsch
  • Re: [PATCH] Documentation: barebox environment: recommend a partition type GUID for GPT partitions, Ahmad Fatoum
  • Re: [PATCH] Documentation: barebox environment: recommend a partition type GUID for GPT partitions, Sascha Hauer
• [PATCH] scripts: imx: Ignore ';' and '\n' in quotes, Albert Schwarzkopf
  • Re: [PATCH] scripts: imx: Ignore ';' and '\n' in quotes, Sascha Hauer
• [PATCH] common: improve CONFIG_DEFAULT_COMPRESSION_* documentation, Ahmad Fatoum
  • Re: [PATCH] common: improve CONFIG_DEFAULT_COMPRESSION_* documentation, Sascha Hauer
• [PATCH] Documentation: booting-linux: document booting specific FIT configuration, Ahmad Fatoum
  • Re: [PATCH] Documentation: booting-linux: document booting specific FIT configuration, Sascha Hauer
• [PATCH 0/5] ARM: Rockchip: Read amount of memory from DDR controller, Sascha Hauer
  • [PATCH 3/5] ARM: Rockchip: Add rk3568 specific barebox entry function, Sascha Hauer
    • Re: [PATCH 3/5] ARM: Rockchip: Add rk3568 specific barebox entry function, Rouven Czerwinski
      • Re: [PATCH 3/5] ARM: Rockchip: Add rk3568 specific barebox entry function, Sascha Hauer
  • [PATCH 2/5] ARM: Rockchip: implement memory read out from controller, Sascha Hauer
    • Re: [PATCH 2/5] ARM: Rockchip: implement memory read out from controller, Rouven Czerwinski
      • Re: [PATCH 2/5] ARM: Rockchip: implement memory read out from controller, Sascha Hauer
  • [PATCH 5/5] ARM: Rockchip: make bootsource logic generic to all SoCs, Sascha Hauer
  • [PATCH 4/5] ARM: Rockchip: rk3568: use rk3568_barebox_entry(), Sascha Hauer
  • [PATCH 1/5] ARM: dts: rk356x: Add DMC controller node, Sascha Hauer
• [PATCH 0/3] ARM: straighten 32bit/64bit Kconfig options, Sascha Hauer
  • [PATCH 1/3] ARM: remove freescale-mx21-ads_defconfig, Sascha Hauer
  • [PATCH 3/3] ARM: cleanup 32bit/64bit support in Kconfig, Sascha Hauer
    • Re: [PATCH 3/3] ARM: cleanup 32bit/64bit support in Kconfig, Masahiro YAMADA
  • [PATCH 2/3] ARM: update defconfigs, Sascha Hauer
• [PATCH] usb: gadget: fastboot: Do not dequeue idle request, Sascha Hauer
  • Re: [PATCH] usb: gadget: fastboot: Do not dequeue idle request, Marco Felsch
• [PATCH] usb: dwc3: gadget: lower informal user notifaction dequeue operation, Marco Felsch
  • Re: [PATCH] usb: dwc3: gadget: lower informal user notifaction dequeue operation, Sascha Hauer
    • Re: [PATCH] usb: dwc3: gadget: lower informal user notifaction dequeue operation, Marco Felsch
• [PATCH] mmc: fix calculation of Max Enhanced Area, Schoyswohl, Roland
  • Re: [PATCH] mmc: fix calculation of Max Enhanced Area, Sascha Hauer
• [PATCH] clk: clk-gpio: Add Kconfig symbol, Sascha Hauer
• [PATCH] pbl: Implement dev_printf(), Sascha Hauer
• [PATCH] ARM: dts: i.MX8MP: add dual-role usb-type-c PORT1 support, Marco Felsch
  • Re: [PATCH] ARM: dts: i.MX8MP: add dual-role usb-type-c PORT1 support, Sascha Hauer
• [PATCH] ARM: ZynqMP: Move ZynqMP feature selection into submenu, Sascha Hauer
• [PATCH] ARM: Rockchip: let boards depend on 32/64bit, Sascha Hauer
  • Re: [PATCH] ARM: Rockchip: let boards depend on 32/64bit, Masahiro YAMADA
    • Re: [PATCH] ARM: Rockchip: let boards depend on 32/64bit, Sascha Hauer
• [PATCH] usb: xhci-hcd: Give it some more time to stop, Sascha Hauer
• [PATCH] ARM: dts: rockchip: remove unused rk3568 dtsi files, Sascha Hauer
• [PATCH 0/4] Allow to probe clks added in overlays, Sascha Hauer
  • [PATCH 4/4] commands: of_overlay: Allow to register clocks from overlay, Sascha Hauer
    • Re: [PATCH 4/4] commands: of_overlay: Allow to register clocks from overlay, Sascha Hauer
  • [PATCH 2/4] clk: of: drop arguments from of_clk_init(), Sascha Hauer
  • [PATCH 3/4] clk: of: make of_clk_init() safe for being called multiple times, Sascha Hauer
  • [PATCH 1/4] clk: clk-gpio: Turn into driver, Sascha Hauer
• [PATCH] net: macb: Adjust zynq compatibles to upstream device trees, Sascha Hauer
• [PATCH] mci: sdhci: Add and use common sdhci_wait_for_done(), Sascha Hauer
  • Re: [PATCH] mci: sdhci: Add and use common sdhci_wait_for_done(), Rouven Czerwinski
    • Re: [PATCH] mci: sdhci: Add and use common sdhci_wait_for_done(), Sascha Hauer
      • Re: [PATCH] mci: sdhci: Add and use common sdhci_wait_for_done(), Rouven Czerwinski
• [PATCH 00/18] USB gadget overhaul, Sascha Hauer
  • [PATCH 18/18] usb: gadget multi: support USB Super Speed, Sascha Hauer
  • [PATCH 07/18] driver: Add unregister_driver(), Sascha Hauer
    • Re: [PATCH 07/18] driver: Add unregister_driver(), Ahmad Fatoum
      • Re: [PATCH 07/18] driver: Add unregister_driver(), Sascha Hauer
  • [PATCH 15/18] usb: gadget: fastboot: Add super speed descriptors, Sascha Hauer
    • Re: [PATCH 15/18] usb: gadget: fastboot: Add super speed descriptors, Johannes Zink
  • [PATCH 01/18] usb: gadget: fastboot: Allocate IN requests when needed, Sascha Hauer
  • [PATCH 10/18] usb: gadget: Add super-speed-plus descriptors, Sascha Hauer
  • [PATCH 02/18] usb: gadget: drop gadget_chips.h, Sascha Hauer
  • [PATCH 03/18] usb: gadget: move files to place where Linux has them, Sascha Hauer
  • [PATCH 06/18] phy: Add mode setting support, Sascha Hauer
  • [PATCH 14/18] usb: gadget: dfu: Assign super speed descriptors, Sascha Hauer
  • [PATCH 16/18] usb: gadget: mass storage: Add super speed descriptors, Sascha Hauer
  • [PATCH 09/18] uuid.h: sync with Linux-6.3-rc2, Sascha Hauer
  • [PATCH 17/18] usb: gadget: u_serial: Put back to list if shutdown, Sascha Hauer
  • [PATCH 12/18] Add dev_WARN_ONCE(), Sascha Hauer
  • [PATCH 04/18] usb: move include files to place where Linux has them, Sascha Hauer
  • [PATCH 05/18] usb: ch9: Update from Linux Kernel, Sascha Hauer
  • [PATCH 08/18] usb: gadget: Update core to Linux-6.3-rc2, Sascha Hauer
  • [PATCH 11/18] usb: gadget: update composite.c from Linux-6.3-rc2, Sascha Hauer
  • [PATCH 13/18] usb: dwc3: sync with Linux-6.3-rc2, Sascha Hauer
• [PATCH] Documentation: imx: improve reboot mode section, Roland Hieber
  • Re: [PATCH] Documentation: imx: improve reboot mode section, Sascha Hauer
• [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Wolfram Sang
  • [PATCH 1/3] mtd: nand: atmel: legacy: add 'algo' to use, Wolfram Sang
  • [PATCH 2/3] mtd: nand: atmel: legacy: use proper ecc_shift, Wolfram Sang
  • [PATCH 3/3] mtd: nand: atmel: legacy: remove superfluous code, Wolfram Sang
  • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sam Ravnborg
    • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Wolfram Sang
      • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sascha Hauer
        • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Alexander Dahl
          • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sam Ravnborg
        • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Wolfram Sang
          • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sam Ravnborg
            • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sam Ravnborg
              • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Wolfram Sang
                • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sascha Hauer
            • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Wolfram Sang
        • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Wolfram Sang
  • Re: [PATCH 0/3] mtd: nand: atmel: legacy: fix boot on USB-A9G20, Sascha Hauer
• [PATCH] commands: nand: add missing parameters to help, Wolfram Sang
  • Re: [PATCH] commands: nand: add missing parameters to help, Sascha Hauer
• [PATCH] commands: edit: fix typo in Kconfig help text, Wolfram Sang
  • Re: [PATCH] commands: edit: fix typo in Kconfig help text, Sascha Hauer
• [PATCH] arm: rockchip: add support for CM3 on IO board, Rouven Czerwinski
  • Re: [PATCH] arm: rockchip: add support for CM3 on IO board, Marco Felsch
• [PATCH v2] Documentation: devicetree: list automatic boot argument fixups, Johannes Zink
  • Re: [PATCH v2] Documentation: devicetree: list automatic boot argument fixups, Ahmad Fatoum
  • Re: [PATCH v2] Documentation: devicetree: list automatic boot argument fixups, Sascha Hauer
• v2023.03.0, Sascha Hauer
• [PATCH] Documentation: devicetree: list automatic boot argument fixups, Johannes Zink
  • Re: [PATCH] Documentation: devicetree: list automatic boot argument fixups, Ahmad Fatoum
• [PATCH] ARM: i.MX: boards: Use imx6_cpu_lowlevel_init(), Sascha Hauer
• [PATCH v1 1/3] net: dsa: add adjust_link support, Oleksij Rempel
  • [PATCH v1 2/3] net: dsa: sja1105: move port enable to adjust link code., Oleksij Rempel
  • [PATCH v1 3/3] net: dsa: sja1105: fall back to default speed configuration if no link was detected, Oleksij Rempel
  • Re: [PATCH v1 1/3] net: dsa: add adjust_link support, Sascha Hauer
• [PATCH v1] ARM: boards: protonic-imx6: fix board probe for LANMCU, Oleksij Rempel
  • Re: [PATCH v1] ARM: boards: protonic-imx6: fix board probe for LANMCU, Sascha Hauer
• Autoboot when idling at prompt possible?, Konstantin Kletschke
  • Re: Autoboot when idling at prompt possible?, Ahmad Fatoum
    • Re: Autoboot when idling at prompt possible?, Konstantin Kletschke
• [PATCH] lib: string: remove duplicated function, Denis Orlov
  • Re: [PATCH] lib: string: remove duplicated function, Sascha Hauer
• [PATCH] imx-usb-loader: Don't try to transfer more data than contained in the image, Uwe Kleine-König
  • Re: [PATCH] imx-usb-loader: Don't try to transfer more data than contained in the image, Sascha Hauer
• [PATCH master] net: dsa: abort registration when master is unresolvable, Ahmad Fatoum
  • Re: [PATCH master] net: dsa: abort registration when master is unresolvable, Sascha Hauer
• [PATCH] common: elf: use proper field to get segment memory size, Denis Orlov
  • Re: [PATCH] common: elf: use proper field to get segment memory size, Sascha Hauer
• [PATCH] fs: tftp: Fix NULL pointer deref in file upload, Sascha Hauer
• [PATCH 0/3] MIPS: bootm: tiny fixes in do_bootm_elf(), Denis Orlov
  • [PATCH 1/3] MIPS: bootm: do not free fdt pointer that contains an error, Denis Orlov
  • [PATCH 2/3] MIPS: bootm: do not leak memory on error in of_overlay_load_firmware(), Denis Orlov
  • [PATCH 3/3] MIPS: bootm: remove unnecessary phys/virt conversions, Denis Orlov
  • Re: [PATCH 0/3] MIPS: bootm: tiny fixes in do_bootm_elf(), Sascha Hauer
• imx8 - gpc: Support IMX8 Lite, Hans Christian Lonstad
  • Re: imx8 - gpc: Support IMX8 Lite, Marco Felsch
    • Re: imx8 - gpc: Support IMX8 Lite, Hans Christian Lønstad
    • Re: imx8 - gpc: Support IMX8 Lite, Hans Christian Lønstad
      • Re: imx8 - gpc: Support IMX8 Lite, Ahmad Fatoum
  • Re: imx8 - gpc: Support IMX8 Lite, Lucas Stach
• [PATCH] Let NET_USB select PHYLIB, Uwe Kleine-König
  • Re: [PATCH] Let NET_USB select PHYLIB, Sascha Hauer
• [PATCH master 1/2] of: partition: skip NVMEM partition setup partition parsing fails, Ahmad Fatoum
  • [PATCH master 2/2] commands: stat: fix UUID print, Ahmad Fatoum
  • Re: [PATCH master 1/2] of: partition: skip NVMEM partition setup partition parsing fails, Sascha Hauer
• [PATCH 1/2] ARM: add LS1021A to Layerscape machine support, Renaud Barbier
• [PATCH v3 0/2] Initial LS1021-IOT board support, Renaud Barbier
  • Re: [PATCH v3 0/2] Initial LS1021-IOT board support, Sascha Hauer
    • RE: [PATCH v3 0/2] Initial LS1021-IOT board support, Renaud Barbier
• [PATCH v3 0/3] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
  • [PATCH v3 1/3] boards: qemu-virt: apply overlay at postcore_initcall level, Ahmad Fatoum
  • [PATCH v3 2/3] boards: qemu-virt: compile overlay as such, Ahmad Fatoum
  • [PATCH v3 3/3] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
  • Re: [PATCH v3 0/3] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
  • Re: [PATCH v3 0/3] boards: qemu-virt: support passing in FIT public key, Sascha Hauer
  • Re: [PATCH v3 0/3] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
    • Re: [PATCH v3 0/3] boards: qemu-virt: support passing in FIT public key, Sascha Hauer
• [PATCH v2 00/23] FlexSPI image/boot/update support, Marco Felsch
  • [PATCH v2 03/23] ARM: i.MX8MM: add missing IMD_USED_OF image metadata entry, Marco Felsch
  • [PATCH v2 04/23] ARM: i.MX8MN: add missing IMD_USED_OF image metadata entries, Marco Felsch
  • [PATCH v2 05/23] mci: imx-esdhc-pbl: fix number of read blocks, Marco Felsch
  • [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles, Marco Felsch
    • Re: [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles, Sascha Hauer
      • Re: [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles, Marco Felsch
        • Re: [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles, Sascha Hauer
          • Re: [PATCH v2 02/23] bbu: make it possible to check multiple of-compatibles, Marco Felsch
  • [PATCH v2 06/23] mci: imx-esdhc-pbl: refactor the esdhc_load_image function, Marco Felsch
  • [PATCH v2 01/23] spi: remove flash_platform_data support, Marco Felsch
  • [PATCH v2 08/23] ARM: i.MX8M: Add QSPI image load support, Marco Felsch
  • [PATCH v2 09/23] ARM: i.MX bootsource: set QSPI instance, Marco Felsch
  • [PATCH v2 11/23] ARM: i.MX8M: Add QSPI boot support, Marco Felsch
  • [PATCH v2 07/23] mci: imx-esdhc-pbl: move imx_load_image into common xload code, Marco Felsch
  • [PATCH v2 10/23] ARM: i.MX8MM bootsource: fix QSPI boot source detection, Marco Felsch
  • [PATCH v2 12/23] scripts: imx-image: convert flag variables into bool, Marco Felsch
  • [PATCH v2 13/23] scripts: imx-image: header_v2: factor out offset parameter, Marco Felsch
  • [PATCH v2 14/23] scripts: imx-image: header_v2: add header_len parameter, Marco Felsch
  • [PATCH v2 16/23] filetype: add NXP FlexSPI filetype, Marco Felsch
  • [PATCH v2 15/23] scripts: imx-image: add FlexSPI image support, Marco Felsch
  • [PATCH v2 17/23] ARM: i.MX: bbu: rename IMX_INTERNAL_FLAG_ERASE to IMX_BBU_FLAG_ERASE, Marco Felsch
  • [PATCH v2 18/23] ARM: i.MX: bbu: add filetype offset, Marco Felsch
  • [PATCH v2 20/23] ARM: i.MX8M: enable FlexSPI image support, Marco Felsch
  • [PATCH v2 21/23] ARM: i.MX8M: add qspi barebox and barebox-environment partitions, Marco Felsch
  • [PATCH v2 22/23] ARM: i.MX8M: add QSPI update handler, Marco Felsch
  • [PATCH v2 23/23] Documentation: i.MX8M: add EVK QSPI NOR barebox installation documentation, Marco Felsch
  • [PATCH v2 19/23] ARM: i.MX: bbu: add FlexSPI update handler, Marco Felsch
  • Re: [PATCH v2 00/23] FlexSPI image/boot/update support, Sascha Hauer
• [PATCH 0/3] MIPS: dma-default: fix dma_sync_single_for_*, Denis Orlov
  • [PATCH 1/3] dma: use dma/cpu conversions correctly in dma_map/unmap_single, Denis Orlov
  • [PATCH 3/3] MIPS: dma-default: do not flush caches in dma_sync_single_* excessively, Denis Orlov
  • [PATCH 2/3] MIPS: dma-default: use virtual addresses when flushing caches, Denis Orlov
• [PATCH] ARM: dts: i.MX8MP: remove memory node, Marco Felsch
  • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Lucas Stach
    • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Marco Felsch
  • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Ahmad Fatoum
    • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Marco Felsch
      • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Ahmad Fatoum
        • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Ahmad Fatoum
          • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Marco Felsch
  • Re: [PATCH] ARM: dts: i.MX8MP: remove memory node, Sascha Hauer
• [RESEND PATCH] kconfig: Proposed language extension for multiple builds, Simon Glass
  • Re: [RESEND PATCH] kconfig: Proposed language extension for multiple builds, Randy Dunlap
    • Re: [RESEND PATCH] kconfig: Proposed language extension for multiple builds, Tom Rini
      • Re: [RESEND PATCH] kconfig: Proposed language extension for multiple builds, Boris Kolpackov
      • Re: [RESEND PATCH] kconfig: Proposed language extension for multiple builds, Masahiro Yamada
• [PATCH v3 0/7] support overlays to the barebox live tree, Sascha Hauer
  • [PATCH v3 3/7] i2c: implement rescan, Sascha Hauer
  • [PATCH v3 5/7] spi: reduce scope of 'chip', Sascha Hauer
  • [PATCH v3 6/7] spi: implement rescan, Sascha Hauer
  • [PATCH v3 7/7] of_overlay: Add option to apply overlay to live tree, Sascha Hauer
    • Re: [PATCH v3 7/7] of_overlay: Add option to apply overlay to live tree, Michael Riesch
      • Re: [PATCH v3 7/7] of_overlay: Add option to apply overlay to live tree, Sascha Hauer
        • Re: [PATCH v3 7/7] of_overlay: Add option to apply overlay to live tree, Michael Riesch
  • [PATCH v3 1/7] kbuild: Add target to build dtb overlay files, Sascha Hauer
  • [PATCH v3 2/7] driver: Add rescan hook to struct device, Sascha Hauer
  • [PATCH v3 4/7] spi: Directly register SPI device, Sascha Hauer
  • Re: [PATCH v3 0/7] support overlays to the barebox live tree, Michael Riesch
    • Re: [PATCH v3 0/7] support overlays to the barebox live tree, Sascha Hauer
• [PATCH] ARM: Do not print exception stacktrace in panic, Sascha Hauer
• [PATCH] ARM: Enable frame pointers for arm64, Sascha Hauer
  • Re: [PATCH] ARM: Enable frame pointers for arm64, Ahmad Fatoum
• [PATCH v2 0/7] support overlays to the barebox live tree, Sascha Hauer
  • [PATCH v2 3/7] i2c: implement rescan, Sascha Hauer
    • Re: [PATCH v2 3/7] i2c: implement rescan, Ahmad Fatoum
      • Re: [PATCH v2 3/7] i2c: implement rescan, Sascha Hauer
  • [PATCH v2 2/7] driver: Add rescan hook to struct device, Sascha Hauer
    • Re: [PATCH v2 2/7] driver: Add rescan hook to struct device, Ahmad Fatoum
      • Re: [PATCH v2 2/7] driver: Add rescan hook to struct device, Ahmad Fatoum
    • Re: [PATCH v2 2/7] driver: Add rescan hook to struct device, Ahmad Fatoum
      • Re: [PATCH v2 2/7] driver: Add rescan hook to struct device, Sascha Hauer
        • Re: [PATCH v2 2/7] driver: Add rescan hook to struct device, Sascha Hauer
  • [PATCH v2 5/7] spi: reduce scope of 'chip', Sascha Hauer
  • [PATCH v2 7/7] of_overlay: Add option to apply overlay to live tree, Sascha Hauer
  • [PATCH v2 4/7] spi: Directly register SPI device, Sascha Hauer
  • [PATCH v2 1/7] kbuild: Add target to build dtb overlay files, Sascha Hauer
    • Re: [PATCH v2 1/7] kbuild: Add target to build dtb overlay files, Ahmad Fatoum
      • Re: [PATCH v2 1/7] kbuild: Add target to build dtb overlay files, Sascha Hauer
        • Re: [PATCH v2 1/7] kbuild: Add target to build dtb overlay files, Ahmad Fatoum
          • Re: [PATCH v2 1/7] kbuild: Add target to build dtb overlay files, Sascha Hauer
  • [PATCH v2 6/7] spi: implement rescan, Sascha Hauer
    • Re: [PATCH v2 6/7] spi: implement rescan, Ahmad Fatoum
• [PATCH] clk: Rockchip: Fix arrays out of bounds access, Sascha Hauer
• [PATCH 00/21] FlexSPI image/boot/update support, Marco Felsch
  • [PATCH 05/21] mci: imx-esdhc-pbl: fix number of read blocks, Marco Felsch
  • [PATCH 02/21] bbu: make it possible to check multiple of-compatibles, Marco Felsch
  • [PATCH 01/21] spi: remove flash_platform_data support, Marco Felsch
  • [PATCH 03/21] ARM: i.MX8MM: add missing IMD_USED_OF image metadata entry, Marco Felsch
  • [PATCH 04/21] ARM: i.MX8MN: add missing IMD_USED_OF image metadata entries, Marco Felsch
  • [PATCH 06/21] mci: imx-esdhc-pbl: refactor the esdhc_load_image function, Marco Felsch
  • [PATCH 10/21] ARM: i.MX8M: Add QSPI boot support, Marco Felsch
  • [PATCH 09/21] ARM: i.MX8MM bootsource: fix QSPI boot source detection, Marco Felsch
  • [PATCH 08/21] ARM: i.MX8M: Add QSPI image load support, Marco Felsch
  • [PATCH 07/21] mci: imx-esdhc-pbl: move imx_load_image into common xload code, Marco Felsch
  • [PATCH 11/21] scripts: imx-image: convert flag variables into bool, Marco Felsch
  • [PATCH 12/21] scripts: imx-image: header_v2: factor out offset parameter, Marco Felsch
  • [PATCH 13/21] scripts: imx-image: header_v2: add header_len parameter, Marco Felsch
  • [PATCH 15/21] filetype: add NXP FlexSPI filetype, Marco Felsch
  • [PATCH 16/21] ARM: i.MX: bbu: rename IMX_INTERNAL_FLAG_ERASE to IMX_BBU_FLAG_ERASE, Marco Felsch
  • [PATCH 17/21] ARM: i.MX: bbu: add target device offset, Marco Felsch
  • [PATCH 14/21] scripts: imx-image: add FlexSPI image support, Marco Felsch
  • [PATCH 19/21] ARM: i.MX8M: enable FlexSPI image support, Marco Felsch
  • [PATCH 18/21] ARM: i.MX: bbu: add FlexSPI update handler, Marco Felsch
  • [PATCH 21/21] ARM: i.MX8M: add QSPI update handler, Marco Felsch
  • [PATCH 20/21] ARM: i.MX8M: add qspi barebox and barebox-environment partitions, Marco Felsch
  • Re: [PATCH 00/21] FlexSPI image/boot/update support, Ahmad Fatoum
    • Re: [PATCH 00/21] FlexSPI image/boot/update support, Marco Felsch
• [PATCH] arm: rockchip_v8_defconfig: disable DEBUG_LL, Sascha Hauer
• [PATCH 0/7] support overlays to the barebox live tree, Sascha Hauer
  • [PATCH 5/7] spi: reduce scope of 'chip', Sascha Hauer
  • [PATCH 1/7] kbuild: Add target to build dtb overlay files, Sascha Hauer
  • [PATCH 6/7] spi: implement rescan, Sascha Hauer
  • [PATCH 2/7] driver: Add rescan hook to struct device, Sascha Hauer
  • [PATCH 3/7] i2c: implement rescan, Sascha Hauer
    • Re: [PATCH 3/7] i2c: implement rescan, Ahmad Fatoum
  • [PATCH 7/7] of_overlay: Add option to apply overlay to live tree, Sascha Hauer
  • [PATCH 4/7] spi: Directly register SPI device, Sascha Hauer
• [PATCH] blspec: support higher verbosity levels for boot, Ahmad Fatoum
  • Re: [PATCH] blspec: support higher verbosity levels for boot, Sascha Hauer
• [PATCH] power: reset: Fix array out of bounds access, Sascha Hauer
• Subject: [PATCH V2 0/1] ARM: lib32: add architected timer, Renaud Barbier
• [PATCH 1/3] gpio: gpioinfo: use dev_name to get device name, Ahmad Fatoum
  • [PATCH 2/3] gpio: pca953x: sync DT compatibles with Linux, Ahmad Fatoum
  • [PATCH 3/3] gpio: pca953x: add optional support for regulator and reset GPIO, Ahmad Fatoum
  • Re: [PATCH 1/3] gpio: gpioinfo: use dev_name to get device name, Sascha Hauer
• [PATCH master 1/5] net: dsa: realtek: rtl8365mb: add missing new line to log print, Ahmad Fatoum
  • [PATCH master 3/5] crypto: caam - pbl-init: fix null pointer check, Ahmad Fatoum
  • [PATCH master 5/5] ARM: i.MX8M: fix outdated comment about imx-atf, Ahmad Fatoum
  • [PATCH master 4/5] ARM: i.MX8M: silence warning accessing bootrom log in zero page, Ahmad Fatoum
  • [PATCH master 2/5] net: dsa: realtek: mdio: fix out-of-bounds memory write, Ahmad Fatoum
  • Re: [PATCH master 1/5] net: dsa: realtek: rtl8365mb: add missing new line to log print, Sascha Hauer
• [PATCH 1/4] ARM: i.MX8M: add option to install OP-TEE, Ahmad Fatoum
  • [PATCH 4/4] drivers: drop unneeded CONFIG_CRYPTO_HW guard, Ahmad Fatoum
  • [PATCH 2/4] drivers: implement of_optee_fixup helper function, Ahmad Fatoum
  • [PATCH 3/4] ARM: i.MX8M: fixup op-tee nodes, Ahmad Fatoum
  • Re: [PATCH 1/4] ARM: i.MX8M: add option to install OP-TEE, Sascha Hauer
• Subject: [PATCH 1/1] ARM:lib32: add architected timer, Renaud Barbier
  • Re: Subject: [PATCH 1/1] ARM:lib32: add architected timer, Ahmad Fatoum
    • Re: Subject: [PATCH 1/1] ARM:lib32: add architected timer, Sascha Hauer
    • RE: Subject: [PATCH 1/1] ARM:lib32: add architected timer, Renaud Barbier
  • <Possible follow-ups>
  • Subject: [PATCH 1/1] ARM:lib32: add architected timer, Renaud Barbier
    • Re: Subject: [PATCH 1/1] ARM:lib32: add architected timer, Sascha Hauer
• Subject: [PATCH 0/1] ARM: lib32: add architected timer, Renaud Barbier
• [PATCH] usb: dwc3: Use clk_bulk_get_all(), Sascha Hauer
• [PATCH] serial: ns16550: Fix device-tree probe and add proper teardown, Jules Maselbas
  • Re: [PATCH] serial: ns16550: Fix device-tree probe and add proper teardown, Jules Maselbas
  • [PATCH v2] serial: ns16550: Fix device-tree probe and add proper teardown, Jules Maselbas
• [PATCH] usb: dwc2: Fix memory leak in probe error path, Jules Maselbas
  • Re: [PATCH] usb: dwc2: Fix memory leak in probe error path, Sascha Hauer
• [PATCH 00/50] ARM: multi-arch support, Sascha Hauer
  • [PATCH 02/50] ARM: Rockchip: Move mach header files to include/mach/rockchip, Sascha Hauer
  • [PATCH 19/50] ARM: ep93xx: Move mach header files to include/mach/ep93xx, Sascha Hauer
  • [PATCH 10/50] ARM: versatile: Move mach header files to include/mach/versatile, Sascha Hauer
  • [PATCH 11/50] ARM: layerscape: Move mach header files to include/mach/layerscape, Sascha Hauer
  • [PATCH 13/50] ARM: uemd: Move mach header files to include/mach/uemd, Sascha Hauer
  • [PATCH 48/50] ARM: bcm283x: Add multi-arch support, Sascha Hauer
  • [PATCH 01/50] ARM: i.MX: Move mach header files to include/mach/imx, Sascha Hauer
  • [PATCH 17/50] ARM: nomadik: Move mach header files to include/mach/nomadik, Sascha Hauer
  • [PATCH 47/50] ARM: bcm283x: Only provide PUTC_LL() when activated, Sascha Hauer
  • [PATCH 04/50] ARM: mvebu: Move mach header files to include/mach/mvebu, Sascha Hauer
  • [PATCH 46/50] ARM: vexpress: Add multi-arch support, Sascha Hauer
  • [PATCH 15/50] ARM: pxa: Move mach header files to include/mach/pxa, Sascha Hauer
  • [PATCH 35/50] pm_domains: Enable explicitly when we have power-domain providers, Sascha Hauer
  • [PATCH 16/50] ARM: omap: Move mach header files to include/mach/omap, Sascha Hauer
  • [PATCH 27/50] debug_ll ns16550: Use CONFIG_BAUDRATE, Sascha Hauer
  • [PATCH 33/50] ARM: omap: Make multi-arch safe, Sascha Hauer
  • [PATCH 49/50] ARM: Add multi_v7_defconfig, Sascha Hauer
  • [PATCH 28/50] ARM: Rockchip: Use ns16550 debug_ll helper, Sascha Hauer
  • [PATCH 18/50] ARM: mxs: Move mach header files to include/mach/mxs, Sascha Hauer
  • [PATCH 26/50] debug_ll ns16550: Do not define PUTC_LL(), Sascha Hauer
  • [PATCH 32/50] ARM: omap: usbboot: Enable USB communication when needed, Sascha Hauer
  • [PATCH 39/50] ARM: i.MX: Add missing include, Sascha Hauer
  • [PATCH 29/50] ARM: Rockchip: Only provide PUTC_LL() when activated, Sascha Hauer
  • [PATCH 40/50] ARM: i.MX: move board selection into menu, Sascha Hauer
  • [PATCH 23/50] ARM: Drop mach dir include path, Sascha Hauer
  • [PATCH 44/50] ARM: vexpress: Drop unnecessary initcall, Sascha Hauer
  • [PATCH 45/50] ARM: vexpress: Only provide PUTC_LL() when activated, Sascha Hauer
  • [PATCH 25/50] ARM: i.MX: Only provide PUTC_LL() when activated, Sascha Hauer
  • [PATCH 20/50] ARM: digic: Move mach header files to include/mach/digic, Sascha Hauer
  • [PATCH 31/50] ARM: omap: Only provide PUTC_LL() when activated, Sascha Hauer
  • [PATCH 09/50] ARM: vexpress: Move mach header files to include/mach/vexpress, Sascha Hauer
  • [PATCH 06/50] ARM: bcm283x: Move mach header files to include/mach/bcm283x, Sascha Hauer
  • [PATCH 37/50] ARM: omap: Add support for multi-arch, Sascha Hauer
  • [PATCH 24/50] include/mach/: use unique double inclusion protectors, Sascha Hauer
  • [PATCH 12/50] ARM: tegra: Move mach header files to include/mach/tegra, Sascha Hauer
  • [PATCH 14/50] ARM: socfpga: Move mach header files to include/mach/socfpga, Sascha Hauer
  • [PATCH 07/50] ARM: stm32mp: Move mach header files to include/mach/stm32mp, Sascha Hauer
  • [PATCH 05/50] ARM: davinci: Move mach header files to include/mach/davinci, Sascha Hauer
  • [PATCH 41/50] ARM: stm32mp: Only provide PUTC_LL() when activated, Sascha Hauer
  • [PATCH 30/50] ARM: omap: Use ns16550 debug_ll helper, Sascha Hauer
  • [PATCH 42/50] ARM: stm32mp: Make safe for multi-arch, Sascha Hauer
  • [PATCH 34/50] ARM: Rockchip: Make safe for multi-arch, Sascha Hauer
  • [PATCH 36/50] ARM: add multi-arch support, Sascha Hauer
  • [PATCH 21/50] ARM: clps711x: Move mach header files to include/mach/clps711x, Sascha Hauer
  • [PATCH 38/50] ARM: zynqmp: Add multi-arch support, Sascha Hauer
  • [PATCH 43/50] ARM: stm32mp: Add multi-arch support, Sascha Hauer
  • [PATCH 50/50] ARM: Add multi_v8_defconfig, Sascha Hauer
  • [PATCH 22/50] ARM: at91: Move mach header files to include/mach/at91, Sascha Hauer
  • [PATCH 03/50] ARM: Zynqmp: Move mach header files to include/mach/zynqmp, Sascha Hauer
  • [PATCH 08/50] ARM: zynq: Move mach header files to include/mach/zynq, Sascha Hauer
• [PATCH 1/2] ARM: i.MX: Sort board Kconfig entries, Sascha Hauer
  • [PATCH 2/2] ARM: i.MX: let boards depend on 32/64bit, Sascha Hauer
• [PATCH 00/13] ARM: misc cleanups, Sascha Hauer
  • [PATCH 04/13] ARM: Drop HAVE_MACH_ARM_HEAD, Sascha Hauer
  • [PATCH 11/13] ARM: i.MX: Add missing include, Sascha Hauer
  • [PATCH 09/13] ARM: drop unused am35xx code in Makefile, Sascha Hauer
  • [PATCH 10/13] ARM: Makefile: Drop board-y, Sascha Hauer
  • [PATCH 13/13] mci: imx-esdhc-pbl: add missing include, Sascha Hauer
  • [PATCH 01/13] ARM: add ENTRY_FUNCTION_HEAD macro, Sascha Hauer
  • [PATCH 06/13] regulator: pfuze: remove unused include, Sascha Hauer
  • [PATCH 12/13] ARM: stm32mp_defconfig: Enable remaining boards, Sascha Hauer
  • [PATCH 08/13] ARM: drop unused mvebu code in Makefile, Sascha Hauer
  • [PATCH 07/13] ARM: drop unused zynq code in Makefile, Sascha Hauer
  • [PATCH 03/13] ARM: at91: Use ENTRY_FUNCTION_HEAD, Sascha Hauer
    • Re: [PATCH 03/13] ARM: at91: Use ENTRY_FUNCTION_HEAD, Ahmad Fatoum
      • Re: [PATCH 03/13] ARM: at91: Use ENTRY_FUNCTION_HEAD, Sascha Hauer
  • [PATCH 02/13] ARM: mvebu: Use ENTRY_FUNCTION_HEAD, Sascha Hauer
  • [PATCH 05/13] ARM: drop CONFIG_HAS_ASM_DEBUG_LL, Sascha Hauer
• [PATCH 0/2] i.MX: Remove support for old boards, Sascha Hauer
  • [PATCH 2/2] ARM: i.MX: Remove config CONFIG_ARCH_TEXT_BASE, Sascha Hauer
  • [PATCH 1/2] ARM: i.MX: Remove old boards, Sascha Hauer
  • Re: [PATCH 0/2] i.MX: Remove support for old boards, Marco Felsch
    • Re: [PATCH 0/2] i.MX: Remove support for old boards, Sascha Hauer
• [PATCH 0/8] Fix/avoid dtc warnings, Sascha Hauer
  • [PATCH 6/8] ARM: dts: imx7d-peb-av-02: Fix dtc warning, Sascha Hauer
  • [PATCH 3/8] ARM: dts: ep7212-clep7212: Fix dtc warnings, Sascha Hauer
  • [PATCH 7/8] ARM: dts: imx7d-peb-eval-02: Fix dtc warnings, Sascha Hauer
    • Re: [PATCH 7/8] ARM: dts: imx7d-peb-eval-02: Fix dtc warnings, Marco Felsch
      • Re: [PATCH 7/8] ARM: dts: imx7d-peb-eval-02: Fix dtc warnings, Sascha Hauer
        • Re: [PATCH 7/8] ARM: dts: imx7d-peb-eval-02: Fix dtc warnings, Marco Felsch
  • [PATCH 4/8] ARM: dts: Fix dtc warnings in state nodes, Sascha Hauer
  • [PATCH 5/8] ARM: dts: Fix dtc warnings in barebox,environment nodes, Sascha Hauer
  • [PATCH 1/8] scripts: dtc: disable interrupt_provider warnings, Sascha Hauer
  • [PATCH 8/8] ARM: dts: imx6ull-jozacp: Move regulators out of subnode, Sascha Hauer
  • [PATCH 2/8] ARM: dts: digic4: Fix dtc warnings, Sascha Hauer
• Subject: [PATCH 3/3] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
• Subject: [PATCH 2/3] ARM: add LS1021A to Layerscape machine support, Renaud Barbier
• Subject: [PATCH V3 0/3] Initial LS1021-IOT board support, Renaud Barbier
• Subject: [PATCH 1/3] ARM:lib32: add architected timer, Renaud Barbier
  • Re: Subject: [PATCH 1/3] ARM:lib32: add architected timer, Ahmad Fatoum
    • RE: Subject: [PATCH 1/3] ARM:lib32: add architected timer, Renaud Barbier
    • RE: Subject: [PATCH 1/3] ARM:lib32: add architected timer, Renaud Barbier
      • Re: Subject: [PATCH 1/3] ARM:lib32: add architected timer, Sascha Hauer
      • Re: Subject: [PATCH 1/3] ARM:lib32: add architected timer, Ahmad Fatoum
• [PATCH 0/9] ARM: misc cleanups, Sascha Hauer
  • [PATCH 2/9] ARM: imx: remove unused mach/clock.h, Sascha Hauer
  • [PATCH 5/9] pinctrl: rockchip: Fix uninitialized var warning, Sascha Hauer
  • [PATCH 1/9] ARM: mxs: remove unused mach/clock.h, Sascha Hauer
  • [PATCH 4/9] ARM: i.MX: Move imxfb.h to include/platform_data/, Sascha Hauer
  • [PATCH 8/9] at91: consolidate usb-a963 128m images, Sascha Hauer
  • [PATCH 7/9] ARM: at91: Switch all boards to multiimage, Sascha Hauer
  • [PATCH 3/9] ARM: rockchip: drop mach/timer.h, Sascha Hauer
  • [PATCH 6/9] ARM: at91: remove unnecessary configs, Sascha Hauer
  • [PATCH 9/9] ARM: pxa: Move plat/ include files to mach/, Sascha Hauer
    • Re: [PATCH 9/9] ARM: pxa: Move plat/ include files to mach/, Ahmad Fatoum
  • Re: [PATCH 0/9] ARM: misc cleanups, Sam Ravnborg
    • Re: [PATCH 0/9] ARM: misc cleanups, Sascha Hauer
      • Re: [PATCH 0/9] ARM: misc cleanups, Sam Ravnborg
• [PATCH 0/5] ARM: remove Samsung arch, Sascha Hauer
  • [PATCH 4/5] serial: remove s3c driver, Sascha Hauer
  • [PATCH 5/5] video: remove s3c driver, Sascha Hauer
  • [PATCH 2/5] mci: remove s3c driver, Sascha Hauer
  • [PATCH 3/5] mtd: nand: remove s3c driver, Sascha Hauer
  • [PATCH 1/5] ARM: remove samsung arch, Sascha Hauer
  • Re: [PATCH 0/5] ARM: remove Samsung arch, Marco Felsch
• [RFC 0/2] dma: clean up streaming DMA API, Denis Orlov
  • [RFC 1/2] dma: rework dma_sync_single interface, Denis Orlov
    • Re: [RFC 1/2] dma: rework dma_sync_single interface, Sascha Hauer
      • Re: [RFC 1/2] dma: rework dma_sync_single interface, Denis Orlov
  • [RFC 2/2] dma: update dma_sync_single uses in drivers, Denis Orlov
• [PATCH v2 1/3] gio: add support for PCAL6408 chip to the pca953x driver, Michael Kopfensteiner
  • [PATCH v2 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Michael Kopfensteiner
    • Re: [PATCH v2 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Sascha Hauer
  • [PATCH v2 3/3] Documentation: IMX: add doc for the Variscite DT8MCustomBoard, Michael Kopfensteiner
• v2023.02.1, Sascha Hauer
• Subject: [PATCH 1/2] ARM: add LS1021A to Layerscape machine support, Renaud Barbier
  • Re: Subject: [PATCH 1/2] ARM: add LS1021A to Layerscape machine support, Sascha Hauer
• Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
  • Re: Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
    • RE: Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
      • Re: Subject: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
• Subject: [PATCH V2 0/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
• [PATCH master] of: base: Fix of_get_stdoutpath() when property does not contain a colon, Ahmad Fatoum
• [PATCH] of: Fix of_get_stdoutpath() when property does not contain a colon, Sascha Hauer
• v2023.02.0, Sascha Hauer
  • Re: v2023.02.0, Sascha Hauer
    • Re: v2023.02.0, Sascha Hauer
• [PATCH] net: make DRIVER_NET_DESIGNWARE_IMX8 select MFD_SYSCON, Bastian Krause
  • Re: [PATCH] net: make DRIVER_NET_DESIGNWARE_IMX8 select MFD_SYSCON, Ahmad Fatoum
  • Re: [PATCH] net: make DRIVER_NET_DESIGNWARE_IMX8 select MFD_SYSCON, Sascha Hauer
• [PATCH] sandbox: Fix fixing linker warnings with newer ld, Sascha Hauer
  • Re: [PATCH] sandbox: Fix fixing linker warnings with newer ld, Ahmad Fatoum
    • Re: [PATCH] sandbox: Fix fixing linker warnings with newer ld, Sascha Hauer
• [PATCH RFC 00/12] ARM64: layerscape: make LS1046 DMA coherent, Ahmad Fatoum
  • [PATCH RFC 04/12] firmware: zynqmp-fpga: pass physical device to DMA API, Ahmad Fatoum
  • [PATCH RFC 07/12] dma: define CONFIG_OF_DMA_COHERENCY, Ahmad Fatoum
  • [PATCH RFC 01/12] usb: dwc3: populate parent of xHCI dev, Ahmad Fatoum
  • [PATCH RFC 08/12] RISC-V: StarFive: J7100: set /soc/dma-noncoherent, Ahmad Fatoum
  • [PATCH RFC 12/12] ARM64: layerscape: configure all DMA masters to be cache-coherent, Ahmad Fatoum
  • [PATCH RFC 10/12] dma: fix dma_sync when not all device DMA is equally coherent, Ahmad Fatoum
  • [PATCH RFC 02/12] usb: xhci: pass physical device to DMA API, Ahmad Fatoum
  • [PATCH RFC 06/12] x86: select OF_DMA_DEFAULT_COHERENT, Ahmad Fatoum
  • [PATCH RFC 05/12] net: designware: eqos: pass physical device to DMA API, Ahmad Fatoum
  • [PATCH RFC 09/12] of: populate new device_d::dma_coherent attribute, Ahmad Fatoum
    • Re: [PATCH RFC 09/12] of: populate new device_d::dma_coherent attribute, Sascha Hauer
      • Re: [PATCH RFC 09/12] of: populate new device_d::dma_coherent attribute, Ahmad Fatoum
  • [PATCH RFC 03/12] net: rtl8169: pass physical device for DMA API, Ahmad Fatoum
  • [PATCH RFC 11/12] dma: provide of_dma_coherent_fixup helper, Ahmad Fatoum
• [PATCH] treewide: rename leftover device_d, Ahmad Fatoum
  • Re: [PATCH] treewide: rename leftover device_d, Ahmad Fatoum
    • Re: [PATCH] treewide: rename leftover device_d, Sascha Hauer
  • Re: [PATCH] treewide: rename leftover device_d, Marco Felsch
• [PATCH] ARM: rockchip: add missing header to <mach/rockchip.h>, Ahmad Fatoum
  • Re: [PATCH] ARM: rockchip: add missing header to <mach/rockchip.h>, Sascha Hauer
• [PATCH master 1/2] of: split part of of_get_stdoutpath into of_find_node_by_chosen, Ahmad Fatoum
  • [PATCH master 2/2] bootsource: use /chosen instead of /aliases/barebox,bootsource-, Ahmad Fatoum
  • Re: [PATCH master 1/2] of: split part of of_get_stdoutpath into of_find_node_by_chosen, Sascha Hauer
• [PATCH master] sandbox: fix linker warnings with newer ld, Ahmad Fatoum
  • Re: [PATCH master] sandbox: fix linker warnings with newer ld, Sascha Hauer
• [PATCH 1/3] gio: add support for PCAL6408 chip to the pca953x driver, Michael Kopfensteiner
  • [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Michael Kopfensteiner
    • Re: [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Sascha Hauer
      • Re: [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Kopfensteiner_Michael
        • Re: [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Sascha Hauer
    • Re: [PATCH 2/3] ARM: IMX8MP: add initial support for Variscite DT8MCustomBoard with iMX8MP, Sascha Hauer
  • [PATCH 3/3] Documentation: IMX: add doc for the Variscite DT8MCustomBoard, Michael Kopfensteiner
• [PATCH RESEND] test: include <linux/printk.h>, Ahmad Fatoum
  • Re: [PATCH RESEND] test: include <linux/printk.h>, Sascha Hauer
• [PATCH 1/2] gen-dtb-s: reference OF IMD entries automatically, Ahmad Fatoum
  • [PATCH 2/2] treewide: remove no-longer needed IMD_USED_OF, Ahmad Fatoum
    • Re: [PATCH 2/2] treewide: remove no-longer needed IMD_USED_OF, Marco Felsch
  • Re: [PATCH 1/2] gen-dtb-s: reference OF IMD entries automatically, Sascha Hauer
• [PATCH] commands: add new of_fixup command to list and disable DT fixups, Ahmad Fatoum
  • Re: [PATCH] commands: add new of_fixup command to list and disable DT fixups, Sascha Hauer
    • Re: [PATCH] commands: add new of_fixup command to list and disable DT fixups, Ahmad Fatoum
• [PATCH] usb: misc: add support for new OF onboard hub binding, Ahmad Fatoum
  • Re: [PATCH] usb: misc: add support for new OF onboard hub binding, Sascha Hauer
• [PATCH master] ARM: stm32mp: much enlarge very early stack size, Ahmad Fatoum
  • Re: [PATCH master] ARM: stm32mp: much enlarge very early stack size, Sascha Hauer
• [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax, Ahmad Fatoum
  • [PATCH v1 07/20] ARM: i.MX51: ccmx51: support newer device trees, Ahmad Fatoum
  • [PATCH v1 19/20] ARM: dts: i.MX8MN: evk: use upstream flash node definition, Ahmad Fatoum
  • [PATCH v1 13/20] ARM: dts: Layerscape: use label-relative paths references, Ahmad Fatoum
  • [PATCH v1 18/20] ARM: dts: socfpga: cut down on NAND node duplication, Ahmad Fatoum
  • [PATCH v1 09/20] ARM: i.MX6: karo-tx6x: fix now renamed DT nodes, Ahmad Fatoum
  • [PATCH v1 14/20] ARM: dts: vf610-zii-cfu1: remove duplicate LED, Ahmad Fatoum
  • [PATCH v1 17/20] ARM: dts: i.MX: delete now renamed memory nodes as well., Ahmad Fatoum
  • [PATCH v1 10/20] ARM: dts: zii: use phandle-relative paths for extending nodes, Ahmad Fatoum
  • [PATCH v1 16/20] ARM: dts: i.MX: use label-relative references, Ahmad Fatoum
  • [PATCH v1 20/20] ARM: dts: i.MX8MN: evk: reduce duplication in barebox-added nodes, Ahmad Fatoum
  • [PATCH v1 15/20] ARM: dts: i.MX53: ccxmx53: remove unused /memory, Ahmad Fatoum
  • [PATCH v1 12/20] ARM: dts: Layerscape: drop unneeded EEPROM node overriding, Ahmad Fatoum
  • [PATCH v1 04/20] ARM: dts: use DT labels instead of paths where possible, Ahmad Fatoum
  • [PATCH v1 06/20] ARM: dts: tegra: switch to path and label references, Ahmad Fatoum
  • [PATCH v1 11/20] ARM: dts: AT91: use label-relative paths for extending nodes, Ahmad Fatoum
  • [PATCH v1 03/20] Documentation: devicetree: describe new label-relative-path syntax, Ahmad Fatoum
  • [PATCH v1 05/20] MIPS: dts: ath79: ar9331: use path references when extending nodes, Ahmad Fatoum
    • Re: [PATCH v1 05/20] MIPS: dts: ath79: ar9331: use path references when extending nodes, Sascha Hauer
  • [PATCH v1 02/20] scripts/dtc: update-dts-source.sh: don't fail if libfdt/ exists, Ahmad Fatoum
  • [PATCH v1 08/20] ARM: i.MX6: gw54xx: rename watchdog nodes, Ahmad Fatoum
    • Re: [PATCH v1 08/20] ARM: i.MX6: gw54xx: rename watchdog nodes, Jules Maselbas
  • [PATCH v1 01/20] scripts/dtc: Update to upstream version v1.7.0, Ahmad Fatoum
  • Re: [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax, Marco Felsch
    • Re: [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax, Ahmad Fatoum
  • Re: [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax, Sascha Hauer
• [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax, Ahmad Fatoum
  • [PATCH 2/2] common: boards: qemu-virt: use new-style DT overlay syntax, Ahmad Fatoum
  • Re: [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax, Marco Felsch
    • Re: [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax, Ahmad Fatoum
      • Re: [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax, Marco Felsch
  • Re: [PATCH 1/2] RISC-V: virt: riscvemu: use new-style DT overlay syntax, Sascha Hauer
• [PATCH 0/1] STM32MP: protonic/phycore: warn about potential DT breakage, Ahmad Fatoum
  • [PATCH 1/1] ARM: dts: STM32MP: protonic/phycore: add note about potential breakage, Ahmad Fatoum
• [PATCH v3 1/1] serial: ns16550: move iomem/ioport init after clock init, Maxim Kochetkov
  • Re: [PATCH v3 1/1] serial: ns16550: move iomem/ioport init after clock init, Ahmad Fatoum
  • Re: [PATCH v3 1/1] serial: ns16550: move iomem/ioport init after clock init, Sascha Hauer
• [PATCH v2 1/1] serial: ns16550: move iomem/ioport init after clock init, Maxim Kochetkov
  • Re: [PATCH v2 1/1] serial: ns16550: move iomem/ioport init after clock init, Ahmad Fatoum
• [PATCH v2] Documentation: i.MX8M: add EVK barebox installation documentation, Ahmad Fatoum
  • Re: [PATCH v2] Documentation: i.MX8M: add EVK barebox installation documentation, Sascha Hauer
• [PATCH] ARM: <asm/barebox-arm.h>: drop undefined barebox_arm_get_boarddata(), Ahmad Fatoum
  • Re: [PATCH] ARM: <asm/barebox-arm.h>: drop undefined barebox_arm_get_boarddata(), Sascha Hauer
• [PATCH 0/3] Fix MMC clocks on RK3568, Sascha Hauer
  • [PATCH 3/3] mci: rockchip-dwcmshc-sdhci: Print less errors, Sascha Hauer
  • [PATCH 1/3] clk: composite: Give mux/div/gate clks names, Sascha Hauer
  • [PATCH 2/3] clk: composite: Fix enable_count when reparenting mux, Sascha Hauer
• SPI NOR w25q128 "flash operation timed out", Klotz, Oliver
  • Re: SPI NOR w25q128 "flash operation timed out", Ahmad Fatoum
    • RE: SPI NOR w25q128 "flash operation timed out", Klotz, Oliver
      • Re: SPI NOR w25q128 "flash operation timed out", Alexander Shiyan
• [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init, Maxim Kochetkov
  • Re: [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init, Ahmad Fatoum
    • Re: [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init, Maxim Kochetkov
      • Re: [PATCH 1/1] serial: ns16550: move iomem/ioport init after clock init, Ahmad Fatoum
• [PATCH master] kwboot: add missing header to fix musl build, Ahmad Fatoum
  • Re: [PATCH master] kwboot: add missing header to fix musl build, Marco Felsch
  • Re: [PATCH master] kwboot: add missing header to fix musl build, Sascha Hauer
• [PATCH] of: describe third arg of of_property_write_bool in kerneldoc, Ahmad Fatoum
  • Re: [PATCH] of: describe third arg of of_property_write_bool in kerneldoc, Sascha Hauer
• Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Enrico Jörns
  • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Richard Purdie
    • Message not available
      • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Alexander Kanavin
        • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Enrico Jörns
        • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Otavio Salvador
          • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Enrico Jörns
          • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Alexander Kanavin
            • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Otavio Salvador
            • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Enrico Jörns
              • Re: [yocto] [OE-core] [PATCH 1/2] barebox: add initial support, Alexander Kanavin
• [PATCH 1/2] Documentation: networking: resize reStructuredText table, Roland Hieber
  • [PATCH 2/2] defaultenv: boot/net: allow customising NFS port and path, Roland Hieber
    • Re: [PATCH 2/2] defaultenv: boot/net: allow customising NFS port and path, Sascha Hauer
      • Re: [PATCH 2/2] defaultenv: boot/net: allow customising NFS port and path, Roland Hieber
• [PATCH v2 1/4] of: base: factor out of_merge_nodes from of_copy_node, Ahmad Fatoum
  • [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
    • Re: [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key, Jan Lübbe
    • Re: [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key, Sascha Hauer
      • Re: [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
        • Re: [PATCH v2 4/4] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
  • [PATCH v2 3/4] boards: qemu-virt: ensure board driver probe at postcore_initcall level, Ahmad Fatoum
  • [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device, Ahmad Fatoum
    • Re: [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device, Michael Riesch
      • Re: [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device, Ahmad Fatoum
        • Re: [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device, Michael Riesch
          • Re: [PATCH v2 2/4] of: support of_ensure_probed for top-level machine device, Ahmad Fatoum
  • Re: [PATCH v2 1/4] of: base: factor out of_merge_nodes from of_copy_node, Sascha Hauer
• [PATCH 1/2] of: base: factor out of_merge_nodes from of_copy_node, Ahmad Fatoum
  • [PATCH 2/2] boards: qemu-virt: support passing in FIT public key, Ahmad Fatoum
• [PATCH 0/4] MIPS: dma: random fixes and improvements, Denis Orlov
  • [PATCH 2/4] MIPS: dma: remove unnecessary ifdefs, Denis Orlov
  • [PATCH 1/4] MIPS: dma: fix nullptr handling in dma_free_coherent, Denis Orlov
  • [PATCH 3/4] MIPS: dma: add arch-specific dma_alloc() implementation, Denis Orlov
  • [PATCH 4/4] MIPS: dma: simplify source structure, Denis Orlov
  • Re: [PATCH 0/4] MIPS: dma: random fixes and improvements, Sascha Hauer
• [PATCH 0/2] make e1000 work on MIPS, Denis Orlov
  • [PATCH 1/2] net: e1000: properly map dma allocations, Denis Orlov
  • [PATCH 2/2] dma: use virt/phys conversions when no dma_offset is specified, Denis Orlov
  • Re: [PATCH 0/2] make e1000 work on MIPS, Sascha Hauer
• [PATCH] nvme: parse partition table when registering a block device, Denis Orlov
  • Re: [PATCH] nvme: parse partition table when registering a block device, Sascha Hauer
• [PATCH] pinctrl: rockchip: fix get_value, Kilian Strasser
  • Re: [PATCH] pinctrl: rockchip: fix get_value, Sascha Hauer
• [PATCH v2 1/2] ddr: imx8m: add support for 3720 MHz DDR rate, Lucas Stach
  • [PATCH v2 2/2] ARM: i.MX8MP: add initial Polyhex DEBIX Model A support, Lucas Stach
    • Re: [PATCH v2 2/2] ARM: i.MX8MP: add initial Polyhex DEBIX Model A support, Sascha Hauer
  • Re: [PATCH v2 1/2] ddr: imx8m: add support for 3720 MHz DDR rate, Sascha Hauer
• [PATCH v3 1/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8MQ/MM/MP DDRC, Lucas Stach
  • [PATCH v3 2/3] ARM: dts: i.MX8MP: add DDRC compatibles, Lucas Stach
  • [PATCH v3 3/3] ARM: dts: i.MX8MP: remove DSP and DSP reserved memory nodes, Lucas Stach
  • Re: [PATCH v3 1/3] ARM: i.MX8M: esdctl: use common compatible to detect i.MX8MQ/MM/MP DDRC, Sascha Hauer
• [PATCH 1/2] ARM: Add Layerscape v7 support, Renaud Barbier
• [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
  • Re: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
    • RE: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
      • Re: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
        • RE: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
          • Re: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
            • RE: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
              • Re: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
                • RE: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
                  • Re: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Sascha Hauer
            • RE: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
        • RE: [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
  • <Possible follow-ups>
  • [PATCH 2/2] ARM: Layerscape: Add LS1021A IOT board support, Renaud Barbier
• [PATCH 0/2] Initial LS1021-IOT board support, Renaud Barbier
  • Re: [PATCH 0/2] Initial LS1021-IOT board support, Sascha Hauer
    • RE: [PATCH 0/2] Initial LS1021-IOT board support, Renaud Barbier
      • Re: [PATCH 0/2] Initial LS1021-IOT board support, Sascha Hauer
        • RE: [PATCH 0/2] Initial LS1021-IOT board support, Renaud Barbier
          • Re: [PATCH 0/2] Initial LS1021-IOT board support, Ahmad Fatoum
• [PATCH] fixup! net: rtl8139: fix ifdown/ifup issues, Denis Orlov
• [PATCH 1/2] net: rtl8139: remove dependence on MIPS, Denis Orlov
  • [PATCH 2/2] net: rtl8139: fix ifdown/ifup issues, Denis Orlov
  • Re: [PATCH 1/2] net: rtl8139: remove dependence on MIPS, Sascha Hauer
• [PATCH 1/2] ddr: imx8m: add support for 3720 MHz DDR rate, Lucas Stach