Hi Marc,
I have some minor remarks/suggestions, see below
On Mon, May 29, 2023 at 10:13:17AM +1000, Marc Reilly wrote:
> Signed-off-by: Marc Reilly <marc@xxxxxxxxxxxxxxx>
> ---
> commands/Kconfig | 7 ++++++
> commands/pwm.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 64 insertions(+)
>
> diff --git a/commands/Kconfig b/commands/Kconfig
> index cc7585bbb2..f2a6d22f69 100644
> --- a/commands/Kconfig
> +++ b/commands/Kconfig
> @@ -1940,6 +1940,13 @@ config CMD_PWM
>
> Controls the pwm values such as period and duty cycle
>
> +
> + pwm_get - get pwm state
> +
> + Usage: pwm_get [d]
> +
> + Displays the pwm values such as period and duty cycle
> +
> config CMD_LED
> bool
> depends on LED
> diff --git a/commands/pwm.c b/commands/pwm.c
> index a21b918c89..d344f7e1ec 100644
> --- a/commands/pwm.c
> +++ b/commands/pwm.c
> @@ -141,3 +141,60 @@ BAREBOX_CMD_START(pwm_set)
> BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
> BAREBOX_CMD_HELP(cmd_pwm_set_help)
> BAREBOX_CMD_END
> +
> +#define HZ_FROM_NANOSECONDS(x) (1000000000UL/(x))
> +
> +static int do_pwm_get(int argc, char *argv[])
> +{
> + struct pwm_device *pwm = NULL;
> + struct pwm_state state;
> + int error = 0;
> + char *devname = NULL;
> + int opt;
> +
> + while ((opt = getopt(argc, argv, "d:")) > 0) {
> + switch (opt) {
> + case 'd':
> + devname = optarg;
> + break;
> + }
> + }
> +
> + if (!devname) {
> + printf(" need to specify a device\n");
> + return COMMAND_ERROR_USAGE;
> + }
> +
> + pwm = pwm_request(devname);
> + if (!pwm) {
> + printf(" pwm device %s not found\n", devname);
> + return -ENODEV;
> + }
> +
> + pwm_get_state(pwm, &state);
> +
> + printf(" pwm params for '%s':\n", devname);
typo: You have inserted a control S (^S) character at the of the string
> + printf(" period_ns: %u (ns)\n", state.period_ns);
> + printf(" duty_ns : %u (ns)\n", state.duty_ns);
nitpicking: maybe you can remove the _ns suffix when priting period/duty,
it is already added in parenthesis.
> + printf(" enabled : %d\n", state.p_enable);
> + printf(" polarity : %s\n", state.polarity == 0 ? "Normal" : "Inverted");
> + printf(" freq : %lu (Hz)\n", HZ_FROM_NANOSECONDS(state.period_ns));
> +
> + pwm_free(pwm);
> + return error;
nit: error is not used, you can remove the variable and directly return 0
> +}
> +
> +BAREBOX_CMD_HELP_START(pwm_get)
> +BAREBOX_CMD_HELP_TEXT("Gets a pwm device parameters.")
> +BAREBOX_CMD_HELP_TEXT(" Specify the device by device name")
> +BAREBOX_CMD_HELP_TEXT("Options:")
> +BAREBOX_CMD_HELP_OPT("-d string", "device name (eg 'pwm0')")
> +BAREBOX_CMD_HELP_END
> +
> +BAREBOX_CMD_START(pwm_get)
> + .cmd = do_pwm_get,
> + BAREBOX_CMD_DESC("get pwm")
> + BAREBOX_CMD_OPTS("[-d]")
> + BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
> + BAREBOX_CMD_HELP(cmd_pwm_get_help)
> +BAREBOX_CMD_END
> --
> 2.35.3
>
>
