On Thu, May 18, 2023 at 09:26:56PM +0200, Ahmad Fatoum wrote:
> On 11.05.23 01:37, Jules Maselbas wrote:
> > This driver is adapted from different sources: Linux, u-boot and p-boot.
> > The latter, p-boot (forked from u-boot), is a bootloader for pinephones.
> >
> > It currently only support PIO xfer but could be further improved to also
> > support DMA xfer. This driver is split in three source file so it can be
> > used by PBL and barebox proper.
> > ---
> > drivers/mci/Kconfig | 6 +
> > drivers/mci/Makefile | 2 +
> > drivers/mci/sunxi-mmc-common.c | 259 +++++++++++++++++++++++++++++++++
> > drivers/mci/sunxi-mmc-pbl.c | 81 +++++++++++
> > drivers/mci/sunxi-mmc.c | 173 ++++++++++++++++++++++
> > drivers/mci/sunxi-mmc.h | 225 ++++++++++++++++++++++++++++
> > include/mach/sunxi/xload.h | 12 ++
> > 7 files changed, 758 insertions(+)
> > create mode 100644 drivers/mci/sunxi-mmc-common.c
> > create mode 100644 drivers/mci/sunxi-mmc-pbl.c
> > create mode 100644 drivers/mci/sunxi-mmc.c
> > create mode 100644 drivers/mci/sunxi-mmc.h
> > create mode 100644 include/mach/sunxi/xload.h
> >
> > diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
> > index bbdca67e9d..c1903b6c90 100644
> > --- a/drivers/mci/Kconfig
> > +++ b/drivers/mci/Kconfig
> > @@ -72,6 +72,12 @@ config MCI_DW_PIO
> > help
> > Use PIO mode (instead of IDMAC) in DW MMC driver.
> >
> > +config MCI_SUNXI_SMHC
> > + bool "Allwinner SD-MMC Memory Card Host Controller"
> > + help
> > + Enable support for the Allwinner SD-MMC Memory Card Host Controller,
> > + his provides host support for SD and MMC interfaces, in PIO mode.
>
> This
>
> > +
> > config MCI_MXS
> > bool "i.MX23/i.MX28"
> > depends on ARCH_MXS
> > diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
> > index e3dc5ad8ae..c17cd41db1 100644
> > --- a/drivers/mci/Makefile
> > +++ b/drivers/mci/Makefile
> > @@ -20,4 +20,6 @@ obj-$(CONFIG_MCI_SPI) += mci_spi.o
> > obj-$(CONFIG_MCI_DW) += dw_mmc.o
> > obj-$(CONFIG_MCI_MMCI) += mmci.o
> > obj-$(CONFIG_MCI_STM32_SDMMC2) += stm32_sdmmc2.o
> > +obj-$(CONFIG_MCI_SUNXI_SMHC) += sunxi-mmc.o
> > +pbl-$(CONFIG_MCI_SUNXI_SMHC) += sunxi-mmc-pbl.o
> > obj-pbl-$(CONFIG_MCI_SDHCI) += sdhci.o
> > diff --git a/drivers/mci/sunxi-mmc-common.c b/drivers/mci/sunxi-mmc-common.c
> > new file mode 100644
> > index 0000000000..845078805b
> > --- /dev/null
> > +++ b/drivers/mci/sunxi-mmc-common.c
> > @@ -0,0 +1,259 @@
> > +#include "sunxi-mmc.h"
> > +
> > +static int sdxc_read_data_pio(struct sunxi_mmc_host *host, struct mci_data *data);
> > +static int sdxc_write_data_pio(struct sunxi_mmc_host *host, struct mci_data *data);
> > +static int sunxi_mmc_send_cmd(struct sunxi_mmc_host *host, struct mci_cmd *cmd, struct mci_data *data, const char **why);
> > +static int sunxi_mmc_set_ios(struct sunxi_mmc_host *host, struct mci_ios *ios);
> > +static void sunxi_mmc_init(struct sunxi_mmc_host *host);
> > +
> > +static int sdxc_read_data_pio(struct sunxi_mmc_host *host, struct mci_data *data)
> > +{
> > + size_t i, len = data->blocks * data->blocksize;
> > + u8 *dst = data->dest;
> > + u32 reg;
> > +
> > + sdxc_writel(host, SDXC_REG_GCTRL, SDXC_GCTRL_ACCESS_BY_AHB);
> > +
> > + for (i = 0; i < len; i += 4) {
> > + if (wait_on_timeout(2000 * MSECOND, !sdxc_is_fifo_empty(host)))
>
> This can add up to 8 seconds. Just use is_timeout directly?
>
> > + return -ETIMEDOUT;
It will return -ETIMEDOUT after two seconds at maximum.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
