Re: Help configuring i.MX6 IPUv3 with a parrallel display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 24, 2016 at 01:39:25PM +0100, Philippe Leduc wrote:
> > You could try setting it to
> V4L2_PIX_FMT_RGB24 manually in ipu_crtc_mode_set().
> It is working with this trick and I do not get any error:
> 
> Unfortunately, the display stay white... I tried to write it with "mw
> -d /dev/fb0 0xXXXXXXXX +0x40000" and splash freeze the board.

Try 'cp /dev/ram0 /dev/fb0' or 'memset -d /dev/fb0 0x0 0x55 1M'. With
'mw' you can only write single words which only gives you some dots in
one screen corner.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux