I just pushed out the first 2016 release: v2016.01.0
See below for a list of patches that went into this release.
Sascha
----------------------------------------------------------------
Aleksey Kuleshov (1):
MIPS: import optimized string functions from Linux
Alexander Aring (1):
memtest: fix missing arguments in help string
Andrey Smirnov (6):
i2c: Add support for DesignWare controllers
i2c-imx: Use xzalloc instead of kzalloc
imx: ocotp: Add code to initialize 'cdev->device_node'
drivers: bus: Match against id_table first
drivers: bus: Match against id_table first
i2c: Port two utility functions from Linux kernel
Antony Pavlov (13):
MIPS: traps.c: separate registers print stuff to show_regs()
MIPS: avoid excessive exception
MIPS: import exception registers restoring macros from linux kernel
MIPS: allow user to pass incorrect address to md command
MIPS: black-swift: skip pbl lowlevel init if running from RAM
MIPS: tplink-mr3020: skip pbl lowlevel init if running from RAM
i2c: import multiplexed I2C bus core support from linux kernel
i2c: add pca954x bus multiplexer driver
net: usb: asix: make rx_fixup ax_skb buffer aligned
net: usb: asix: fix 'no previous prototype' warning
environment: support env on at24 eeprom
net: tap: make locally used functions static
net: tap: fix whitespaces
Christian Hemp (3):
ARM: phytec-som-imx6: update environment
ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM
ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
Du Huanpeng (4):
lib: fix coding style
fbconsole: move font variable into struct font_desc
lib: readline support ctrl-l to clear screen
font: fbconsole: add custom font supports
Enrico Jorns (1):
state: disable load command
Florian Vallee (3):
imx35: register usb-misc by default
eukrea-cpuimx35: setup usb through chipidea-imx driver
eukrea-cpuimx35: update defconfig
Jan Remmet (3):
bootm: cleanup bootm_open_oftree
bootm: get file type before bootm_open_os_uimage
state: make type check error verbose
Lucas Stach (14):
ARM: imx6: add MMDC arbitration control register define
ARM: microsom: delete cargo-cult from Makefile
ARM: microsom: change barebox image name for Hummingboard
ARM: microsom: import DCD from SolidRun U-Boot
ARM: microsom: add full set of module variants on Hummingboard
ARM: microsom: make ETH work on production modules
ARM: microsom: get MAC address from fuses
ARM: ventana: remove unneeded clock init in DCD
net: rtl8169: get rid of DMA_ADDRESS_BROKEN
ARM: mx6sx-sabresdb: drop unneeded makefile rules
ARM: mx6sx-sabresdb: set proper hostname
ARM: ccxmx53: properly guard initcall for multiimage
MCI: init device_node for MCI mainarea cdev
reset: fix non GPIO reset
Marc Kleine-Budde (8):
of_path: of_find_path() factor out device detection logic into separate function
of_path: add of_find_path_by_node()
state: make use of of_find_path_by_node() and add return -EPROBE_DEFER if device is not available
state: use name of device node as name if alias is not available
crypto: Kconfig: add submenu for crypto related config options
crypto: add simple keystore
state: prepare raw backend for hmac support
state: backend_raw: add hmac support
Markus Pargmann (1):
defaultenv: boot/net: Boot initramfs from tftp if present
Oleksij Rempel (1):
MIPS: pbl: add pbl_blt macro
Peter Mamonov (1):
common: filetype: do not redetect MBR-type devices as a FAT-type
Sascha Hauer (33):
ARM: omap: Use correct device to mount on /boot
graphics_utils: check for valid framebuffer before creating a screen
fbconsole: register fonts dynamically
ls: fix exitcode
loadb: Use local cdev
loadb: deactivate console before using it for loadb
console: Set baudrate during registration
loadb: Allow to specify device to use
loads: Use putchar rather than console_putc
i2c: Create for_each_i2c_adapter()
i2c_probe: Make command easier to work with
video: pwm-backlight: Honour discrete brightness levels from dt
reset: Allow dummy reset lines
reset: Remove unused *_optional functions
reset: Add gpio reset support
video: i.MX IPUv3: Set ldb clocks correctly
spi: i.MX: optimize transfers for ECSPI v2.3
Merge branch 'for-next/arm'
Merge branch 'for-next/console'
Merge branch 'for-next/fb'
Merge branch 'for-next/i2c'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mmc'
Merge branch 'for-next/mtd'
Merge branch 'for-next/net'
Merge branch 'for-next/omap'
Merge branch 'for-next/reset'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/state'
ARM: dts: Add *.dtb.lzo to clean files
Release v2016.01.0
Sebastian Hesselbarth (19):
of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux
mtd: nand: Clarify Marvell Orion Kconfig prompt
arm: pxa: Prepare for NAND clkdev lookup on PXA3xx
arm: pxa: Add clock for Zylonite NFC
mtd: nand_mrvl_nfc: Use common clock for core clock
arm: pxa: Remove pxa_get_nandclk()
mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00
mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase
mtd: nand_mrvl_nfc: Protect mrvl_nand_probe_dt
mtd: nand_mrvl_nfc: Fix num-cs property parsing
mtd: nand_mrvl_nfc: Get ecc parameters from DT
mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths
mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions
mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC
mtd: nand_mrvl_nfc: Add support for 8bit BCH HW ECC
mtd: nand_mrvl_nfc: Add support for HW BCH ECC
mtd: nand_mrvl_nfc: Add support for NDCB3 register
mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP
mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U
Sergey Koshechkin (4):
mk-omap-image: make some locally used functions static
docproc: drop unused utility
crypto: crc32: fix warnings: no previous prototype for 'crc32', 'crc32_no_comp', 'file_crc'
make_directory: fix warning: no previous prototype
Stefan Christ (11):
ARM: imx6: phycard: use numeric suffix in device tree
boards: Add phytec-som-imx6
ARM: phytec-som-imx6: set loadaddr to start of DDR memory.
ARM: pfla02: append suffix 1bank
ARM: imx6q: pfla02: Add support for 512MiB RAM on one bank
ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAM
ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bank
net: fec: set phy reset time to 1ms
net: fec: implement dtb property phy-reset-duration
net: fec: fix indentation and whitspaces
wdog: imx-wd: watchdog cannot be disabled again
Teresa Remmet (1):
driver: watchdog: Add support for omap_wdt
Trent Piepho (13):
firmware: socfpga: Add parameter "programmed" to fpgamgr driver
socfpga: Initialize emac physels to RGMII correctly
net: designware: Don't hang in reset with powered down phy
mci: core: bus-width property should override driver default
mci: dw_mmc: socfpga: Supply bus-width in platform_data
mci: dw_mmc: Delete devname in platform_data
mci: dw_mmc: Add support for high speed modes
i2c: core: Add client I2C address to devinfo
eeprom: Add support for 24c1025 EEPROM
eeprom: Support pagesize OF device tree property
ARM: Remove kernel booting call for thumb2 mode
ARM: Remove do_execute and thumb2_execute
of_path: Fix bug with partitions, simply code
Uwe Kleine-König (1):
ARM: don't let the unwinder depend on exception handling
Wjatscheslaw Stoljarski (1):
readline: Kconfig: fix typo
Yegor Yefremov (1):
driver: make all dev_request_mem_region_* routines MIPS compatible
Zahari Doychev (1):
environment: allow saving of symbolic link changes
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
